- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 4,000 gloss colours.
- High-solids single-coat alkyd paint containing anti-corrosive pigments, recommended as a single coat system for blast cleaned steel surfaces both indoors and outdoors.
- Good application properties.
- The product has MED (Marine Equipment Directive) certificate no VTT-C-11978-15-17 and is thus accepted for painting surfaces inside ships.
- Recommended for steel framework, service platforms and different types of machinery and equipment.
- For industrial and professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Temalac SC-F 80 is a glossy high-solids single-coat alkyd paint containing anti-corrosive pigments, recommended as a single coat system for blast cleaned steel surfaces, both indoors and outdoors, for steel framework, service platforms and different types of machinery and equipment.
The product has MED (Marine Equipment Directive) certificate no VTT-C-11978-15-17 and is thus accepted for painting surfaces inside ships
For industrial and professional use only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Recommended Film Thicknesses & Theoretical Coverage
- Drying Times
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Application
- Thinner
- Cleaner
Features & Benefits
- Huge colour range, including RAL, BS & NCS shades
- High film build properties
- For low VOC demands
- Recommended as a single coat system for blast cleaned steel surfaces both indoors and outdoors
- Good application properties
- The product has MED (Marine Equipment Directive) certificate no VTT-C-11978-15-17 and is thus accepted for painting surfaces inside ships
- Recommended for steel framework, service platforms and different types of machinery and equipment
- For industrial and professional use only
Technical Data
Volume solids
- 56±2% (ISO 3233)
Weight solids
- 72±2%
Specific gravity
- 1.4 kg / l depending on colour.
VOC
- The Volatile Organic Compounds amount is 400 g/litre of paint.
- VOC content in ready to use paint (thinned 20 % by volume) is 480 g/l.
Recommended Film Thicknesses & Theoretical Coverage
| Recommended film thicknesses | Theoretical coverage | |
|---|---|---|
| Wet | Dry | |
| 140µm | 80µm | 7.1 m²/l |
| 180µm | 100µm | 5.6 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
| DFT 80µm | 10℃ | 23℃ | 35℃ |
|---|---|---|---|
| Dust dry, after | 30 minutes | 20 minutes | 10 minutes |
| Touch dry, after | 12 hours | 6 hours | 3 hours |
| Recoatable, after | 2 weeks | 1 week | 1 week |
| Forced drying: 1 hour / +60ºC | |||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces:
Blast clean to grade Sa2½. (ISO 8501-1)
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Recommended Primers
- Temalac SC-F 80
Recommended Topcoats
- Temalac SC-F 80
Application Conditions
- All surfaces must be clean and dry and free from contamination.
- The temperature of the substrate should not fall below 5°C during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 3–5 minutes and then apply the full coat.
- Stir the product carefully before use.
For air-assisted airless spraying:
- The product is thinned approximately 5-15%.
- Recommended nozzle tip is 0.011"–0.013" and pressure 160–200 bar.
- Atomising air pressure should be 2 bar.
- Spray angle shall be chosen according to the shape of the object.
- For heated airless spraying:
- Product is thinned approximately 5–15%.
- Recommended nozzle tip is 0.011"–0.013" and pressure 160–200 bar.
- Spray angle shall be chosen according to the shape of the object.
- For conventional spraying:
- The product is thinned approximately 5–10%. Recommended nozzle tip is 1.6–1.8 mm and pressure 3–4 bar.
Thinners
Cleaners
Product Details
4756-768484
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Spray
- Colour
- Standard / Ready Mixed, Fully Tintable
- Single, Two or Three Pack
- Single
- Product Certifications
- MED (Marine Equipment Directive) certificate no VTT-C-11978-15-17
- Pack Size
- 20L
- Parts
- 1
- Base Type
- Alkyd
- Interior/Exterior Use
- Interior & exterior
- Solvent
- Mixture - see safety data sheet
- Suitable Substrates
- Blast cleaned steel
- Key Features
- MED (Marine Equipment Directive) certificate no VTT-C-11978-15-17 and is thus accepted for painting surfaces inside ships
- Coverage
- 5.6 m²/l - 7.1 m²/l
- Recommended Thinner/Cleaner
- Thinner 1006
- Compatible Primers
- Temalac SC-F 80
- Compatible Topcoats
- Temalac SC-F 80
- Min. Application Temperature
- The temperature of the substrate should not fall below 5°C during application and drying.
- Solids by Volume
- 72±2%
- VOC
- The Volatile Organic Compounds amount is 400 g/litre of paint. VOC content in ready to use paint (thinned 20 % by volume) is 480 g/l.
- Recommended Dry Film Thickness
- 80µm - 100µm
- Recommended Wet Film Thickness
- 140µm - 180µm
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- 1 week
- Touch Dry (at 23°C)
- 6h
- Specific Gravity
- 1.4 kg / l depending on colour.
- Solids by Weight
- 72±2%
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Temalac
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temalac SC-F 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
