- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temanyl PVB is a one-component, polyvinyl-butyral adhesion primer. Adheres extremely well to different kinds of surfaces, such as steel, zinc, aluminium and stainless steel.
- The primer ensures the durability of the whole painting system.
- A very fast-drying adhesion primer, which saves time during the application process.
- Withstands temperatures up to +160°C.
- Due to its high temperature resistance, Temanyl PVB can be overcoated with powder coatings.
- Can be applied using a "wet-on-wet" painting technique.
- Suitable to be used as a primer under vinyl, chlorinated rubber and acrylic topcoats.
- Recommended for bridges, cranes, conveyors, harbor equipment and tank exteriors.
Tikkurila Temanyl PVB is a one-component, polyvinyl-butyral adhesion primer. Recommended for bridges, cranes, conveyors, harbor equipment and tank exteriors. The primer ensures the durability of the whole painting system.
Temanyl PVB is a very fast-drying adhesion primer, which saves time during the application process.
Withstands temperatures up to +160°C. Due to its high temperature resistance, Temanyl PVB can be overcoated with powder coatings.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Application
- Thinners
- Cleaning Of Equipment
- VOC
- Health And Safety
Features & Benefits
- One-component polyvinyl-butyral adhesion primer.
- Adheres extremely well to different kinds of surfaces, such as steel, zinc, aluminium and stainless steel.
- The primer ensures the durability of the whole painting system.
- Temanyl PVB is a very fast-drying adhesion primer, which saves time during the application process.
- Withstands temperatures up to +160°C.
- Temanyl PVB can be overcoated with powder coatings.
- Can be applied using a "wet-on-wet" painting technique.
- For industrial use only according to Directive 1999/13/EC.
Technical Data
Volume Solids: 23±2%.
Weight Solids: 35±2%.
Specific Gravity: 1.1–1.2 kg/l depending on the colour.
Recommended Film Thicknesses and Theoretical Coverage:
Recommended film thicknesses | Theoretical coverage | |
---|---|---|
Wet (unthinned paint) | Dry | |
45µm | 10µm | 23.0 m²/l |
90µm | 20µm | 11.5 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Time:
DFT 20µm | 10°C | 23°C | 35°C |
---|---|---|---|
Dust dry, after | 20 minutes | 15 minutes | 5 minutes |
Touch dry, after | 55 minutes | 45 minutes | 20 minutes |
Recoatable, after | 20 minutes | 10 minutes | 5 minutes |
Through dry after 30 minutes / +150ºC |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Gloss: Matt.
Colour Shades: Grey, Black.
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4).
Steel surfaces:
- Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Zinc Surfaces:
- Sweep blast clean with mineral abrasives, e.g. quartz sand, to an even roughness. (SaS, SFS 5873).
- If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Panssaripesu detergent.
Stainless Steel:
- Roughen the surface by grinding or sweep blasting using non-metallic abrasives.
Aluminium Surfaces:
- Sweep blast clean with non-metallic abrasives to an even roughness. (SaS, SFS 5873).
- If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Maalipesu detergent.
Recommended Primers
- Temanyl PVB.
Recommended Topcoats
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below 5ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- Stir the product carefully before use.
- For airless spraying, the product is thinned approximately 30% to the viscosity 20–35s (DIN4).
- Recommended nozzle tip is 0.011"– 0.013" and pressure 120–160 bar.
- Spray angle shall be chosen according to the shape of the object.
- For conventional spraying, the product is thinned approximately 30% to the viscosity 20– 35s (DIN4).
- Recommended nozzle tip is 1.6–1.8 mm and pressure 3–4 bar.
- For dip coating, the product is thinned 30% to the viscosity 20s (DIN4).
- Note! When stoving Temanyl PVB before overcoating the temperature must not exceed +160ºC because the intercoat adhesion may then deteriorate.
Thinners
Cleaning Of Equipment
VOC
- The Volatile Organic Compounds amount is 690 g/litre of paint.
- VOC content of the paint (thinned 30% by volume) is 740 g/l.
Health And Safety
- Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel, zinc, stainless steel, aluminium
- Application Method
- Spray
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Base Type
- Polyvinyl-butyral
- Solvent
- Mixture (see Safety Data Sheet)
- Key Features
- Excellent adhesion, quick drying, high temperature resistance
- Coverage
- 11.5 m²/l - 23.0 m²/l
- Recommended Thinner/Cleaner
- Thinner 1031
- Compatible Primers
- Temanyl PVB
- Compatible Topcoats
- Duasolid 50, Duasolid 90 Aluminium, Temadur SC-F 20, Temadur SC-F 50, Temadur SCF 80
- Min. Application Temperature
- 5ºC
- Solids by Volume
- 23±2%
- Heat Resistance (up-to)
- 160°C
- VOC
- 740 g/l
- Recommended Dry Film Thickness
- 10µm - 20µm
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- 10mins
- Touch Dry (at 23°C)
- 45mins
- Specific Gravity
- 1.1–1.2 kg/l
- Base Type
- Solvent-Based
- Base Type
- Polyvinyl Butyral
- Suitable For Use On
- Zinc
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Application Method
- Spray
- Usages
- Adhesion Promoting
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Product Range
- Temanyl
- Colour Family
- Grey
- Heat Resistance
- Up To 200°C
- Dry to Recoat (@ 20-25°C)
- 10 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temanyl PVB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Duasolid 50
Tikkurila Duasolid 50, a two-component, high-solids oxirane ester paint containing active anti-corrosive pigments. This eco-friendly alternative to epoxy and polyurethane paints is suitable for earth moving machines, haulage and lifting equipment, forklifts, agricultural machinery, electric appliances, pumps and other steel structures,...
Tikkurila Temadur SC-F 20
Tikkurila Temadur SC-F 20, recommended especially to be used as a single coat finish for agricultural and earth moving machinery and other machinery and equipment, with active anti-corrosive pigments that ensure corrosion resistance even in severe climatic conditions. Can help speed up the painting process and decrease the overall costs of...
Tikkurila Temadur SC-F 50
Tikkurila Temadur SC-F 50, a 2-component fast-drying semi-gloss polyurethane paint with excellent weathering and abrasion resistance, recommended especially to be used as a single coat finish for agricultural and earth moving machinery and other machinery and equipment. Huge range of colours available from RAL, BS & NCS Also suitable...
Tikkurila Temadur SC-F 80
Tikkurila Temadur SC-F 80, a two-component fast-drying glossy polyurethane paint, containing anti-corrosive pigments, developed for single-coat painting agricultural and earth-moving machinery. Huge range of colours available from RAL, BS & NCS Meets the requirements set in Volvo STD 423-0014, accelerated corrosion test for 6 weeks...
Tikkurila Thinner 1031
Tikkurila Thinner 1031 is a thinner for epoxy paints, silicone paints, polyvinylbutyral paints, 2-component zinc rich paints and epoxy shop primers.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...