- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Temalac SC-F 40, a high-solids alkyd paint containing anti-corrosive pigments especially designed for use as a single-coat system on steel surfaces. The product protects the surface from corrosion and is recommended for steel framework, service platforms and different types of machinery and equipment.
- Huge colour range, including RAL, BS & NCS shades
- High film-building properties. Easy to apply in high film thicknesses, thus saving time in production
- Meets the demands for low VOCs as contains less volatile organic compounds than conventional alkyd paints, having less impact on the environment
- For industrial and professional use only
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Temalac SC-F 40 is a high-solids alkyd paint containing anti-corrosive pigments especially designed for use as a single-coat system on steel surfaces. The product protects the surface from corrosion and is recommended for steel framework, service platforms and different types of machinery and equipment.
For industrial and professional use only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Recommended Film Thicknesses & Theoretical Coverage
- Drying Times
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Application
- Thinner
- Cleaner
Features & Benefits
- Huge colour range, including RAL, BS & NCS shades
- Especially designed for use as a single-coat system on steel surfaces
- Due to its anti-corrosive pigmentation, the product protects the surface from corrosion. Temalac
- SC-F 40 is recommended for steel framework, service platforms and different types of machinery and equipment
- High film-building properties. Easy to apply in high film thicknesses, thus saving time in production
- Meets the demands for low VOCs as contains less volatile organic compounds than conventional alkyd paints, having less impact on the environment
- Recommended for steel framework, service platforms and different types of machinery and equipment
- For industrial and professional use only
Technical Data
Volume solids
- 61±2% (ISO 3233)
Weight solids
- 76±2%
Specific gravity
- 1.5 kg / l depending on colour.
VOC
- The Volatile Organic Compounds amount of the paint mixture is 360 g/litre of paint.
- VOC content in ready to use paint (thinned 10% by volume) is 410 g/l.
Recommended Film Thicknesses & Theoretical Coverage
| Recommended film thicknesses | Theoretical coverage | |
|---|---|---|
| Wet | Dry | |
| 160µm | 100µm | 6.1 m²/l |
| 200µm | 120µm | 5.1 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
| DFT 80µm | 10℃ | 23℃ | 35℃ |
|---|---|---|---|
| Dust dry, after | 30min | 20min | 10 min |
| Touch dry, after | 8h | 5h | 3h |
| Recoatable, after | 2 weeks | 1 week | 1 week |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces:
Blast clean to grade Sa2½. (ISO 8501-1)
If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Recommended Primers
- Temalac SC-F 40
Recommended Topcoats
- Temalac SC-F 40
Application Conditions
All surfaces must be clean and dry and free from contamination.
The temperature of the substrate should not fall below 5°C during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
Stir the product carefully before use.
For airless spraying, the product is thinned approximately 0-5%.
Recommended nozzle tip is 0.011"–0.015" and pressure 160–200 bar.
Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 5–10%. Recommended nozzle tip is 1.6–1.8 mm and pressure 3–4 bar.
In order to reach thicker coats use "wet-on-wet" technique.
Thinners
- Thinner 1006
Cleaners
- Thinner 1006
Product Details
4769-783168
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Spray
- Sheen
- Semi-Matt
- Colour
- Standard / Ready Mixed, Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Parts
- 1
- Touch Dry (at 20°C)
- 5 hours
- Coverage
- 5.1 m²/l - 6.1 m²/l
- Recommended Thinner/Cleaner
- Thinner 1006
- Compatible Primers
- Temalac SC-F 40
- Compatible Topcoats
- Temalac SC-F 40
- Solids by Volume
- 61±2% (ISO 3233)
- VOC
- The Volatile Organic Compounds amount of the paint mixture is 360 g/litre of paint. VOC content in ready to use paint (thinned 10% by volume) is 410 g/l.
- Touch Dry
- 35°C - 3h
- Finish
- Semi-gloss
- Recommended Dry Film Thickness
- 100µm - 120µm
- Recommended Wet Film Thickness
- 160µm - 200µm
- UN Number
- UN1263
- Dry to Recoat (at 10°C)
- 2 weeks
- Touch Dry (at 10°C)
- 8h
- Dry to Recoat (at 23°C)
- 1 week
- Touch Dry (at 23°C)
- 3h
- Dry to Recoat
- 35°C - 1 week
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- Semi-Gloss
- Application Method
- Spray
- Usages
- High Solids
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- 1 Coat
- Usages
- Direct to Metal
- Product Usage Type
- Topcoat
- Product Range
- Temalac
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 5 hours
- Product Attributes
- 1 coat
- Product Attributes
- High Build
- Product Attributes
- High Solids
- Product Attributes
- Anti-Corrosive
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temalac SC-F 40 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
