- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temaprime EE is a fast drying, one-component anti-corrosive special primer. Its recommended uses include both new and maintenance painting of containers, agricultural machinery and other steel structures.
- Huge colour range available.
- Adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc.
- Dries fast and is, therefore, quickly ready for overcoating.
- Minimum damage from burning, welding and flame cutting. Burnt paint can be easily removed by e.g. brushing.
- Can also be used without any topcoat for steel surfaces in dry indoor areas.
Product customisation
Don't forget to save your customization to be able to add to cartTikkurila Temaprime EE is a fast drying, one-component anti-corrosive special primer.
Temaprime EE adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc.
Temaprime EE dries fast and is, therefore, quickly ready for overcoating.
Recommended uses include: interior and exterior surfaces of ships above waterline, storage tank exteriors, agricultural machinery and other surfaces where especially good adhesion and anticorrosive properties are required.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Application
- Thinners
- Cleaning Of Equipment
- VOC
- Health And Safety
Features & Benefits
- Fast drying, one-component anti-corrosive special primer.
- Recommended uses include both new and maintenance painting of containers, agricultural machinery and other steel structures.
- Adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc.
- Dries fast and is, therefore, quickly ready for overcoating.
- Recommended uses: interior and exterior surfaces of ships above waterline, storage tank exteriors, agricultural machinery and other surfaces where especially good adhesion and anticorrosive properties are required
- Minimum damage from burning, welding and flame cutting. Burnt paint can be easily removed by e.g. brushing.
- Can also be used without any topcoat for steel surfaces in dry indoor areas.
Technical Data
Volume Solids: 47±2% (ISO 3233).
Weight Solids: 65±2%.
Specific Gravity: 1.3±0.1 kg / l.
Recommended Film Thicknesses and Theoretical Coverage:
Recommended film thicknesses | Theoretical coverage | |
---|---|---|
Wet | Dry | |
85µm | 40µm | 11.7 m²/l |
130µm | 60µm | 7.8 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Time:
DFT 50µm | 10°C | 23°C | 35°C |
---|---|---|---|
Dust dry, after | 1h | 15min | 10min |
Touch dry, after | 3h | 1h | 30min |
Recoatable, after | 4h | 45min | 30min |
Through dry after 30 min / +120ºC |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Gloss: Matt.
Colour Shades: Huge colour range from RAL and BS. Plus TVT 4000 and TVT 4001.
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4).
- Blast clean at least to grade Sa2.
- Clean small damages by tool cleaning to St2. (ISO 8501-1).
- If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
- Sweep blast clean with mineral abrasives, e.g. quartz sand, to an even roughness. (SaS, SFS 5873).
- If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Panssaripesu detergent.
- Sweep blast clean with non-metallic abrasives to an even roughness. (SaS, SFS 5873).
- If sweep blasting is not possible, the surface should be roughened by hand abrading or washed with Maalipesu detergent.
- Oil, grease, salt and dirt are removed from the surface by appropriate means.
- Repair any damage to the primer coat.
- Note the overcoating time of primer. (ISO 12944-4).
Recommended Primers
- Temaprime EE.
Recommended Topcoats
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below 5ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- Stir the product carefully before use.
- For airless spraying, the product is thinned approximately 0–5%.
- Recommended nozzle tip is 0.011"–0.015" and pressure 120–160 bar.
- Spray angle shall be chosen according to the shape of the object.
- For brush application the product should be thinned according to the circumstances.
Thinners
Thinner 1006, Thinner 1053
Large surfaces: Thinner 1053 (slow)
Cleaning Of Equipment
Thinner 1006
VOC
The Volatile Organic Compounds amount is 470 g/litre of paint. VOC content of the paint (thinned 5% by volume) is 499 g/l.
Health And Safety
Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Zinc, Aluminium
- Application Method
- Brush, spray
- Sheen
- Matt
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 3L, 10L, 20L
- Base Type
- Alkyd
- Solvent
- Mixture (see Safety Data Sheet)
- Key Features
- Fast drying, anti corrosive
- Coverage
- 7.8 m²/l - 11.7 m²/l
- Recommended Thinner/Cleaner
- Thinner 1006, Thinner 1053
- Compatible Primers
- Temaprime EE
- Compatible Topcoats
- Temalac AB 70, Temalac AB MIO, Temalac FD 20, Temalac FD 50, Temalac FD 80, Temalac ML 90, Temacryl AR 50, Fontecryl 25, Fontelac QD 80.
- Min. Application Temperature
- 5ºC
- Solids by Volume
- 47±2%
- VOC
- 499 g/l
- Recommended Dry Film Thickness
- 40µm - 60µm
- Recommended Wet Film Thickness
- 85µm - 130µm
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- 45 min
- Touch Dry (at 23°C)
- 1hr
- Specific Gravity
- 1.3±0.1 kg / l
- Solids by Weight
- 65±2%
- Base Type
- Solvent-Based
- Suitable For Use On
- Zinc
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Product Range
- Temaprime
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Dry to Recoat (@ 20-25°C)
- 45 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temaprime EE is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Fontelac QD 80
Tikkurila Fontelac QD 80 is a water-borne, one-component glossy topcoat based on alkyd dispersion ideal for touch-up painting in indoor areas. Used as a glossy finish for small tanks, agricultural machinery, haulage equipment and other machinery and equipment. Easy to use - one-component Ideal for touch-up painting in indoor areas Wide...
Tikkurila Temacryl AR 50
Tikkurila Temacryl AR 50, a physically drying, one-component semi-gloss acrylic based topcoat that can be applied at sub-zero temperatures on surfaces exposed to marine or industrial climates and mild chemical stress. Huge colour range available with RAL, BS & NCS shades Easy to handle in the painting process High film-building...
Tikkurila Temalac AB 70
We no longer stock this product, but can recommend Tikkurila Temalac FD 80 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Tikkurila Temalac FD 20
Tikkurila Temalac FD 20 is a fast-drying, one component semi-matt anti-corrosive single coat alkyd paint that, due to its anti-corrosive pigmentation, Temalac FD 20 can be used as a single-coat system and a primer on steel surfaces. Easy to apply by spraying - ideal for use in workshops with fast production cycles. Has been used in...
Tikkurila Temalac FD 50
Tikkurila Temalac FD 50, a fast-drying, one-component semi-gloss alkyd topcoat, containing anti-corrosive pigments, that can be used as a single-coat system and a primer on steel surfaces. The paint is an ideal solution for workshops with fast production cycles and for painting stations Huge colour range, including RAL, BS & NCS shades...
Tikkurila Temalac FD 80
Tikkurila Temalac FD 80 is a fast-drying, one-component glossy alkyd topcoat. It is an ideal solution for workshops with fast production cycles and for on-site-painting. Used as a topcoat in alkyd systems. The paint is an ideal solution for workshops with fast production cycles and for on-site-painting. Provides an almost unlimited range...
Tikkurila Temalac ML 90
Tikkurila Temalac ML 90 is a fast-drying, one-component alkyd topcoat. Its usage areas are small tanks, agricultural machinery, haulage equipment and other machinery and equipment. Used when there is a high demand for colour and gloss retention. Gives the surface a high-quality appearance. It is the perfect choice when an easy-to-apply...
Tikkurila Thinner 1053
Tikkurila Thinner 1053 is a slow thinner for alkyd paints, chlorinated rubber paints and 1-component acrylic paints. For use with recommended Tikkurila products.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...