- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temasolid EZ 80 is a two-component glossy polyurea paint, containing anti-corrosive pigments. Recommended to be used as a single-coat finish on metal and especially for agricultural and earth-moving machinery and other machinery and equipment
- Huge colour range available.
- Fast curing & drying coating that can be applied as a single-coat for fast return to service.
- High volume solids and low VOC.
- Excellent spraying properties, even with airless spray.
- Excellent mechanical resistance and edge retention.
- The product has been tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Tikkurila Temasolid EZ 80 is a two-component glossy polyurea paint, containing anti-corrosive pigments, hardener aliphatic isocyanate.
Due to its high volume of solids, Temasolid EZ 80 has less environmental impact than conventional solvent-borne topcoats.
Temasolid EZ 80 can be applied in thick films, thus enabling a faster painting process.
Temasolid EZ 80 resists mechanical abrasion well. The paint forms a very tough and scratch-resistant surface rapidly after application.
New-generation glossy polyurea paint Temasolid EZ 80 challenges traditional anti-corrosion paints. This product is very easy to apply by spraying. Based on its chemical properties polyurea forms an extremely hard paint film, thereby reducing potential damage during transportation and installation.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Primers
- Application Conditions
- Mixing Components
- Application
- Thinners
- Cleaning Of Equipment
- VOC
- Health And Safety
Features & Benefits
- Huge colour range available.
- Two-component glossy polyurea paint, containing anti-corrosive pigments.
- High volume solids and low VOC.
- Can be applied in thick films, thus enabling a faster painting process.
- Forms an extremely hard paint film, thereby reducing potential damage during transportation and installation.
- Fast curing & drying coating that can be applied as a single-coat for fast return to service.
- Excellent spraying properties, even with airless spray.
- Forms an easy-to-clean surface with very good colour retention.
- The product has been tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.
- Recommended to be used as a single-coat finish on metal and especially for agricultural and earth-moving machinery and other machinery and equipment.
Technical Data
Volume Solids: 75±2%.
Weight Solids:85±2%.
Specific Gravity: 1.4±0.1 kg / l (mixed).
Mixing Ratio:
- Base - 1.75 parts by volume - Temasolid EZ 80
- Hardener - 1 part by volume - 008 7640
Pot Life (23°C): 30 mins.
Recommended Film Thicknesses and Theoretical Coverage:
| Recommended film thicknesses | Theoretical coverage | |
|---|---|---|
| Wet | Dry | |
| 110µm | 80µm | 9.4 m²/l |
| 160µm | 120µm | 6.3 m²/l |
| 210µm | 160µm | 4.7 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Time:
| DFT 120µm | 23°C / RH 20% | 23°C / RH 50% | 23°C / RH 80% |
|---|---|---|---|
| Dust dry, after | 45min | 20min | 15min |
| Touch dry, after | 1.5h | 45min | 25min |
| Dry to handle, after | 2.5h | 1h | 40min |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Gloss: Gloss.
Colour Shades: RAL, NCS, BS, White.
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4).
- Blast clean to grade Sa2½. (ISO 8501-1).
- If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
- In order to get the best performance the surface profile should be medium grit. (ISO 8503-2).
- Oil, grease, salt and dirt are removed from the surface by appropriate means.
- Repair any damage to the primer coat.
- Note the overcoating time of primer. (ISO 12944-4).
Recommended Primers
- Fontecryl AP.
- Temanyl PVB.
- Temacoat GPL-S Primer.
- Temacoat Primer.
- Temacoat SPA Primer.
- Temazinc 77.
- Temazinc 99.
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +5ºC during application or drying.
- The surface temperature of the steel should remain at least 3ºC above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
- First stir base and hardener separately.
- The correct proportions of base and hardener must be mixed thoroughly before use.
- Use power mixer for mixing.
- Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
Airless Spraying:
- The product is thinned depending on the temperature of the components and shape of the object approximately 0–5%.
- Recommended nozzle tip is 0.011"–0.015" and pressure 160–200 bar.
- Spray angle shall be chosen according to the shape of the object.
Conventional Spraying:
- the product is thinned approximately 0–10%.
- Recommended nozzle tip is 1.6-1.8 mm and pressure 2.5 bar.
- Atomising air pressure should be 1–3 bar.
- Spray angle shall be chosen according to the shape of the object.
- Do not use worn-out nozzle.
Thinners
Cleaning Of Equipment
Thinner 1048 or 1067.
VOC
The Volatile Organic Compounds amount is 230 g/litre of paint mixture. VOC content of the paint mixture (thinned 10% by volume) is 290 g/l.
Health And Safety
Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Product Details
4802-773920
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10L
- Parts
- Two
- Interior/Exterior Use
- Both
- Solvent
- Mixture (see Safety Data Sheet)
- Mixing Ratio
- 1.75 :1
- Suitable Substrates
- Steel
- Key Features
- Fasy cure, low VOC, excellent mechanical resistance
- Application
- Spray
- Touch Dry (at 20°C)
- 45 mins
- Coverage
- 4.7 m²/l - 9.4 m²/l
- Recommended Thinner/Cleaner
- Thinner 1048, Thinner 1067
- Compatible Primers
- Fontecryl AP, Temanyl PVB, Temacoat GPL-S Primer, Temacoat Primer, Temacoat SPA Primer, Temazinc 77, Temazinc 99.
- Min. Application Temperature
- 5ºC
- Solids by Volume
- 75±2%
- VOC
- 290 g/l.
- Finish
- Gloss
- Recommended Dry Film Thickness
- 80µm - 160µm
- Recommended Wet Film Thickness
- 110µm - 210µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN3469
- Dry to Handle (at 23°C)
- 1h
- Pot Life
- 30 mins at 23°C
- Specific Gravity
- 1.4±0.1 kg / l (mixed)
- Solids by Weight
- 85±2%
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Spray
- Usages
- Direct to Metal
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Easy to Clean
- Usages
- 1 Coat
- Usages
- Sag Resistance
- Usages
- Exterior Durability
- Usages
- Scratch Resistance
- Product Usage Type
- Topcoat
- Product Range
- Temasolid
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Product Type
- Polyurea
- Environment
- Atmospheric
- Environment
- Exterior Durability
- Touch Dry/Dust Free (@ 20-25°C)
- 45 mins
- Product Attributes
- 1 coat
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
- Product Attributes
- Easy to Clean
- Resistance to
- Sag
- Resistance to
- Scratch
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temasolid EZ 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Tikkurila Fontecryl AP
Tikkurila Fontecryl AP is a water-borne, one-component fast-drying acrylic based primer for various surfaces containing active anti-corrosive pigments. Provides excellent adhesion Used as an anti-corrosive primer on steel, aluminium and zinc surfaces Suitable for dipping Can be overcoated both with water and solvent-borne topcoats Wide...
Price
£355.62
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Temacoat GPL-S Primer
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate. Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Price
£49.32
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Temacoat Primer
A two-component resin modified epoxy paint containing anti-corrosive pigments that can be applied at sub-zero temperatures as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress. Recommended for building frameworks, tubular bridges, conveyors and other steelwork and equipment Adheres well to...
Price
£510.80
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Temacoat SPA Primer
Tikkurila Temacoat SPA Primer, a two-component resin modified epoxy primer with anti-corrosive pigments with excellent adhesion to steel, zinc and aluminium surfaces, that can be applied in thick layers, thus enabling faster production. Has high solids content Used as a primer or an intermediate coat in paint systems exposed to abrasion...
Price
£389.21
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Temanyl PVB
Tikkurila Temanyl PVB is a one-component, polyvinyl-butyral adhesion primer. Adheres extremely well to different kinds of surfaces, such as steel, zinc, aluminium and stainless steel. The primer ensures the durability of the whole painting system. A very fast-drying adhesion primer, which saves time during the application process....
Price
£547.67
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Temazinc 99
Tikkurila Temazinc 99, a 2-component, polyamide cured zinc-rich epoxy paint providing superior cathodic protection for steel, used as a primer in epoxy, polyurethane, acrylic and chlorinated rubber systems for steel surfaces exposed to severe climatic conditions. Prequalified in the NORSOK system 1; an excellent choice for the most...
In stock
Tikkurila Temazinc 77
Tikkurila Temazinc 77, a primer with good cathodic protection for steel containing over 80% zinc, fully meeting requirements of the standard ISO 1294-5 for zinc-rich primers. Used in coating systems where extended durability is required Used as a primer in epoxy, polyurethane, acrylic and chlorinated rubber systems for steel surfaces...
Price
£259.22
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Thinner 1048
Tikkurila Thinner 1048 is a thinner for polyurethane paints, oxirane ester paints, 2-component acrylic paints, polyaspartic paints and polysiloxane paints. For use with recommended Tikkurila products.
Price
£26.54
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Thinner 1067
Tikkurila Thinner 1067 is a slow thinner for polyurethane paints and polyaspartic paints. Designed for use with recommened Tikkurila products
Price
£197.16
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery