- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Instarmac UltraCrete Enviro Mastic, a hot applied polymer modified mastic asphalt that gives superior performance in the patching and repairing of carriageways, footpaths, footways and cycle tracks or as a surface finish when installing street furniture and access covers.
- Please note, this product is only available with a minimum order of 50 x 20KG bags
- No Voids - Long-term wear resistance
- First time permanent repair - Ideal for remote locations
- No waste - only use what is required
- More than 50% recycled material per bag
- SROH approved
- No mechanical compaction required
- Product Assessment Certification PA946 0006
Instarmac UltraCrete Enviro Mastic is a hot applied polymer modified mastic asphalt that gives superior performance in the patching and repairing of carriageways, footpaths, footways and cycle tracks or as a surface finish when installing street furniture and access covers.
Product Assessment Certification PA946 0006 - click to see more conformance further below.
Its unique design provides long-term wear resistance and eliminates voids, ensuring first time, high quality, permanent repairs and installations. It is ideally suited for use as a surfacing material surrounding road ironwork, gullies and other street apparatus. It is also suitable as a surface repair in foot & cycle paths and around utility reinstatements, as well as for local repairs, airfield repairs and surfacing of narrow trench reinstatements.
Stored as a granular material, UltraCrete Enviro Mastic is poured from the bag on site, into a pre-heated mastic mixer, where it can be applied as a molten mastic repair or surfacing material.
UltraCrete Enviro Mastic is a granular material made up of a blend of aggregates, recycled plainings and polymer modified bitumen pellets. The rubber modification in the mastic provides unique properties, both in application and performance. Supplied in 20kg bags the granular mix can be poured and heated in a purpose made mastic mixer onsite, allowing the exact quantity of material to be heated for use - so no waste.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Conformance
- General Requirements
- Preparation - Ironwork Reinstatement
- Installation of UltraCrete Enviro Mastic
- Health, Safety and Environmental
- Quality Assurance
- Technical
Features & Benefits
- Hot applied polymer modified mastic asphalt
- Superior performance in the patching and repairing of carriageways, footpaths, footways and cycle tracks
- Also used as a surface finish when installing street furniture and access covers
- No Voids
- First time permanent repair
- Long-term wear resistance
- No waste - only use what is required
- More than 50% recycled material per bag
- SROH approved
- Ideal for remote locations
- No mechanical compaction required
- Product Assessment Certification PA946 0006
Conformance
UltraCrete Enviro Mastic complies with the test requirements of the revised Specification for Highway Works (SHW), Clause 946 as defined in the Specification for the Reinstatement of Openings in Highways (SROH). Assessment of the product to meet such requirements is listed under PTS PAS Certification Ref: PA946 0006 issued by Pavement Testing Services Ltd (PTS Ltd).
UltraCrete Enviro Mastic is manufactured to conform to the requirements of BS EN 13108 Bituminous Mixtures – Material Specifications, Part 6 Mastic Asphalt. Additionally its PTS Certification covers the incorporation of 50% + reclaimed aggregate within the confines of BS EN 13108.
General Requirements
UltraCrete Enviro Mastic requires a mastic mixer to heat the material ready for use. It should be ensured that the machine operator is fully trained in the use of the mixer and is fully compliant with Health & Safety requirements and hazards associated with gas heated mixers and the handling of hot materials.
Preparation - Ironwork Reinstatement
The installation area shall be clearly defined, before any work commences and the surrounding pavement/carriageway should be stable and structurally sound.
The saw cut edges of the excavation around the ironwork or apparatus (“access surround”) should be within the required parameters, in line with the Specification for the Reinstatement of Openings in Highways (SROH) and should follow the guidance of S11.5 Ancillary Activities and more specifically the relevant sections of:
- S6 Flexible & Composite Roads
- S7 Rigid & Modular Roads
- S8 Footpaths, Footways & Cycle Tracks
Prior to using UltraCrete Enviro Mastic as the surface finish, the ironwork reinstatement should have been made good using UltraCrete bedding mortars (fully conforming to HA104/09) and flowable backfill concrete materials, approved for use and holding Product Acceptance Scheme Accreditation (PAS Certificate).
The Ironwork and chamber installed should correctly match in size and the chamber should be of sufficient strength to support the frame & cover and expected loading for the category of road.
When bedding the ironwork, the frame should be aligned using a string line, to ensure it is level with the surrounding surfaces and camber of the road, on all sides.
The materials used for bedding the ironwork must be installed at a minimum depth of 10mm. The backfill flowable concrete must be installed at a minimum depth of 20mm over the flange of the ironwork and minimum of 50mm below the road surface/top of the ironwork.
Once the backfill concrete has cured, spray a uniform application of UltraCrete SCJ Seal & Tack Coat, to prime all concrete surfaces, metal frame edges and saw cut asphalt edges.
Installation of UltraCrete Enviro Mastic
The operator should be familiar with pre-heating the drum of the mixer to warm the equipment if starting from cold and should the use equipment as per manufacturers’ guidelines.
After pre-heating the mixer, add the required number of 20kg bags of UltraCrete Enviro Mastic, pouring the contents into the mastic mixer. Do not put plastic bag into the mix. The operator should be aware of the maximum/minimum quantities of material that the mixer can safely handle.
Mix the material until it has melted and is reading between 180℃ & 190℃ on the mixer temperature gauge (always ensure the temperature gauge on the mixer is in full working order before you start). Ensure the product is thoroughly homogenous which may take approximately 1 hour depending on ambient temperatures, quantity of product in the mixer and type / capability of mixer in use.
Regularly crosscheck accuracy of machine temperature gauges by using a laser temperature gun aimed at material as it is discharged from the mixer hatch.
When it reaches the correct temperature and fluid consistency, discharge the molten material into a metal mastic bucket. Pour the material from the bucket into the prepared reinstatement and hand smooth using a mastic float to press and layer the material into position. Apply the material in layers of 20 - 50mm depth, pressing firmly and smoothing the surface to create a dense, level finish. Minimum overall installation depth of UltraCrete Enviro Mastic should be 50mm up to a maximum overall depth of 150mm.
Allow each layer of the mastic to cool before applying the next, approximately 15 minutes, in order for it to solidify and create a firm base for the next layer.
After the final layer has been applied and while the product is still molten, press either 8/14mm or 14/20mm graded, of pre-coated aggregate chippings, as required into the hot surface of the mastic to provide suitable surface texture. (The aggregate should be rated 65 PSV for lower category and 68 PSV for higher category roads). Chippings can be pressed into the mastic using hand roller or float or with the aid of a mechanical roller.
Typical coverage rate for the chippings would be 8kg/sqm to 10kg/sqm for 8/14mm grade or 10kg/sqm to 13kg/sqm for 14/20mm grade.
The product will set in 45 minutes to 1 hour dependant on depth, size of installation and ambient external weather conditions.
The installation should not be trafficked for a minimum period of 1 hour to ensure product is set sufficiently to accept vehicle loading.
Health, Safety and Environmental
Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash your hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste responsibly and in accordance with local authority requirements. A full material datasheet relating to this product is available to download from our attachments section above.
Quality Assurance
All products are manufactured in a plant whose quality management system is certified / registered as being in conformity with BS EN IS0 9001.
Our products are guaranteed against defective materials and manufacture, and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept any liability arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All products are sold subject to our conditions of sale, copies of which may be obtained on request.
Technical
Technical | |
---|---|
Unit Size: | 20kg bag. 50 units /pallet (1000kg) |
Appearance as supplied: | Dry, pourable granular aggregate & rubber bitumen pellet mix |
Appearance in use: | Black, molten, free flowing, granular, hot mastic |
Application Temp ℃: | 170℃ to 195℃ |
Installation: | Applied in 20mm to 50mm layers |
Min / Max Overall Depth: | 50mm to 150mm |
Surface Texture Aggregates: | 65 - 68 PSV - 8/14mm & 14/20mm, single sized, asphalt coated chippings, depending on road category. |
Traffic Access: | Typically 1 hour after installing, depending on depth & ambient temperature conditions. |
% Recycled Material | 50%+ recycled material per 20kg |
Data sheet
- Manufacturer
- Instarmac
- Interior / Exterior Use
- Exterior Use
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- HA104/09
- Pack Size
- 20KG
- Parts
- 1
- Mortar Type
- Polymer modified mastic
- Interior/Exterior Use
- Exterior
- Minimum Applied Thickness
- 50mm
- Maximum Applied Thickness
- 150mm
- Suitable Substrates
- Bedding mortars and flowable backfill concrete materials.
- Key Features
- Superior performance in the patching and repairing of carriageways, footpaths, footways and cycle tracks or as a surface finish when installing street furniture and access covers.
- Min. Application Temperature
- 170℃ to 195℃
- Size
- 20KG
- Layer Thickness
- Applied in 20mm to 50mm layers
- Waiting time
- Typically 1 hour after installing, depending on depth & ambient temperature conditions.
- Drying time
- 45 minutes to 1 hour dependant on depth, size of installation and ambient external weather conditions.
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Roads
- Suitable For Use On
- Pavements
- Application Method
- Pour
- Product Usage Type
- Mastic
- Product Range
- Ultracrete
Questions
Question about the product
simon on 2024-07-15 15:59:46 | Question:
is there any restriction to size of a instamac enviro-mastic patch |
Answer from Rawlins’ Technical Team:
Although there isn't as such a maximum, there is a point where large patches are not cost effective vs traditional hot lay material. Please e-mail [email protected] with more information on the sizes to allow us to assist further. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Instarmac UltraCrete Enviro Mastic is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT