- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
PPG Nu-Klad Imp is a two-component, solvent-free, impregnating epoxy floor primer.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Drying Times
- Surface Preparation
- Application Methods
- Health & Safety
Features & Benefits
- Primer for NU-KLAD floor coating systems
- Excellent impregnating properties (penetration and saturation of the concrete)
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
PPG Nu-Klad Imp | ||||||
Number of Components: | Two | |||||
Mass Density: | 1.2 kg/l (9.9 lb/US gal) | |||||
Volume Solids: | 100% | |||||
VOC (supplied): | UK PG 6/23(92) Appendix 3: max. 0.0 g/l (approx. 0.0 lb/US gal) | |||||
Dry To Walk On: | 16 hours | |||||
Overcoating Interval: | Minimum: 16 hours | |||||
Maximum: 7 days | ||||||
Shelf Life: | Base: at least 12 months when stored cool and dry | |||||
Hardener: at least 12 months when stored cool and dry |
Drying Times
Curing Time For DFT Up To 50μm(2.0mils) | |||
---|---|---|---|
Substrate temperature | Dry to Walk On | Light Impact/Abrasion | Full Cure |
10°C (50°F) | 30 hours | 34 hours | 14 days |
20°C (68°F) | 16 hours | 18 hours | 7 days |
25°C (77°F) | 8 hours | 10 hours | 4 days |
Overcoating Interval For DFT Up To 150 µm (6.0 mils) | ||||||
---|---|---|---|---|---|---|
Overcoating with: | Interval | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | ||
Itself, NU-KLAD SL or NU-KLAD HD | ||||||
Minimum | 30 hours | 16 hours | 8 hours | |||
Maximum | 7 days | 7 days | 4 days |
Notes:
- Surface should be dry and free from any contamination.
- For intervals exceeding the maximum overcoating interval, the surface has to be roughened sufficiently before overcoating.
- Abrading is recommended in case of insufficient roughness after curing.
Surface Preparation
Concrete
- Dried for at least 28 days in good ventilation conditions.
- Moisture content should not exceed 4.5%.
- Concrete must be sound, dry, free from laitance and any contamination.
- Rough surface; eventually abraded by power tool or diamond abrading tool.
Substrate Temperature
- Ambient temperature during application and curing should be between 10°C (50°F) and 30°C (86°F).
- Relative humidity during application and curing should not exceed 85%.
- Substrate temperature during application and curing should be between 10°C (50°F) and 30°C (86°F).
- Substrate temperature during application should be at least 5°C (7°F) above dew point.
Application Methods
System Specification:
- Use one layer up to saturation of the concrete. A second layer is recommended in case the aspect of the first layer is not homogeneous with matt/bright effect caused by difference of absorption in the concrete.
Mixing Ratio By Volume: Base To Hardener 69.6:30.4 (Mixing Ratio By Weight : Base To Hardener 74:26)
- Material temperature should be between 10°C (50°F) and 30°C (86°F).
- Mix base and hardener with a mechanical mixer thoroughly for 3 minutes until homogeneous.
- Pour the mixture into another can and mix for 1 minute.
Induction Time:
- None
Pot life (At Application Viscosity) | |
---|---|
Mixed Product Temperature | Pot Life |
10°C (50°F) | 1 hour |
20°C (68°F) | 40 minutes |
30°C (86°F) | 20 minutes |
Trowel:
- Plastering trowel for rough, strong absorbing substrates.
- No thinner should be added.
Brush/Roller
- For smooth, normal absorbing substrates.
- No thinner should be added.
Cleaning Solvent
Health & Safety
- Since improper use and handling can be hazardous to health and cause of fire or explosion, safety precautions included with Product Data/Application Instruction and Material Safety Data Sheet must be observed during all storage, handling, use and drying periods.
- For further information please see the safety data sheets in the attachments section above.
Data sheet
- Manufacturer
- PPG
- For Use By
- Professional Use
- Application Method
- Brush, Roller, Trowel
- Sheen
- Semi-Matt
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10L
- Parts
- Two
- Mixing Ratio
- Base To Hardener 69.6:30.4 (Mixing Ratio By Weight :Base To Hardener 74:26)
- Fully Cured (at 20°C)
- 7 days
- Pot Life (at 20°C)
- 40 minutes
- Recommended Thinner/Cleaner
- THINNER 90-53
- Max. Application Temperature
- 30°C (86°F)
- Min. Application Temperature
- 10°C (50°F)
- Density
- 1.2 kg/l (9.9 lb/US gal)
- Solids by Volume
- 100%
- VOC
- UK PG 6/23(92) Appendix 3: max. 0.0 g/l (approx. 0.0 lb/US gal)
- Shelf Life (from date of manufacture)
- Base: at least 12 months when stored cool and dry. Hardener: at least 12 months when stored cool and dry.
- Finish
- Semi-Matt
- Size
- 10L
- UN Number
- Hardener - UN3066
- UN Number (Base)
- UN3082
- Pot Life (at 10°C)
- 1 hour
- Fully Cured (at 10°C)
- 14 days
- Base Type
- Solvent-Free
- Suitable For Use On
- Concrete
- Finish
- Semi-Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Trowel
- Components
- 2K
- Usages
- Impregnation
- Product Usage Type
- Primer
- Product Range
- Nu-Klad
- Colour Family
- Clear
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Nu-Klad Imp is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG Nu-Klad HD
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. PPG Nu-Klad HD is a four-component, solvent-free, self-leveling, antiskid epoxy floor coating. Ultimate solution for high-abrasion flooring...