- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Synthetic rubber and resins based primer. It is a ready for use product, used as primer to improve the bond strength of a range of self-adhering membranes including air & vapour control layers and carrier membranes.
- Ease of application
- No hot works with torch
- High adhesion to different structural decks and substrates
- Bonding strength results in increased adhesion strength for S-Vap 5000E SA, S-Vap HD SA and Carrier Membrane SA on a wide range of substrate types
- Can be used in a fully adhered roof build-up
Click To Jump To Section:
Surface Preparation
Substrate Quality
The substrate must offer sufficient strength and adhesion to resist the forces generated by wind suction.
Suface Preparation
The substrate must be solvent resistant, firm, clean, dry, free of foreign objects and stripping agents as well as free of oil and grease.
Suitable Substrates
- Concrete, lightweight concrete, screed, brick, plaster.
- Oriented Strand Boards (OSB), plywood panels, timber boards.
- Metal deck
- Shall not be used on following substrates:
- Synthetic membranes e.g. PVC, FPO
- EPS/XPS thermal insulation boards
- Lacquered surfaces
Application
Apply only in dry weather at temperatures of at least 5 °C. Before applying ensure that the substrate is clean, dry, free of grease. If heavily contaminated or oiled, sheet metal must be cleaned with cleaner before applying the primer.
Primer 600 is ready for use and may not be thinned or mixed with other products. Before use stir the primer vigorously. Apply a uniform, thin coat of Primer 600 to the area, which will be installed the same day. Absorbent substrates may require two coats. Allow sufficient drying time.
Drying time depends greatly on the weather, the characters of the substrate, and amount of primer applied but is approximately 30 minutes. Let the primer dry so it is no longer tacky.
Tools
- Use brush or roller
Cleaning Of Tools
- Tools and equipment must be cleaned with cleaner immediately after use
Health & Safety
- Refer to the safety data sheet in the attachments section for further information
Data sheet
- Manufacturer
- Sika
- For Use On
- Concrete
Screed
Brick
Plaster
Plywood
Timber
Metal - Application Method
- Brush
Roller - Single, Two or Three Pack
- Single
- Pack Size
- 12.5KG
- Base Type
- Synthetic rubber and synthetic resins based primer. Containing solvents
- Key Features
- Ease of application. No hot works with torch. High adhesion to different structural decks and substrates
- Min. Application Temperature
- 5°C
- Min. Application Temperature
- +5 °C
- Density
- 0.84 kg/l (+20 °C)
- VOC
- 63.4 %
- Shelf Life (from date of manufacture)
- At least 12 months from date of production if stored properly in original, unopened and undamaged sealed container. Expiry date is on container.
- Size
- 12.5KG
- Drying time
- Approx 30 minutes
- Final strength
- 1 week
- Base Type
- Synthetic rubber
- Suitable For Use On
- Concrete
- Suitable For Use On
- Plaster
- Suitable For Use On
- Plywood
- Suitable For Use On
- Metal
- Suitable For Use On
- Brick
- Suitable For Use On
- Screeds
- Suitable For Use On
- Timber
- Application Method
- Roller
- Application Method
- Brush
- Manufacturer
- Sika
- Usages
- Ready To Use
- Usages
- Flat Roof Construction
- Product Usage Type
- Primer
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Primer 600 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT