- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sika Concrete Primer, a two component, rapid curing, high solids, solvent based polyurea primer that is used as a bonding agent on cementitious substrates for Sikafloor 405/406.
- For Professional use
- Significantly reduces the likelihood of outgassing from susceptible substrates
- Seals and primes substrates enabling over-coating at a minimum of 30 minutes (under ideal conditions)
- Long pot life
- Helps to stabilise substrates
- Can be used between coats to locally address pin-holing
Sika Concrete Primer is a two component, rapid curing, high solids, solvent based polyurea primer, used as a bonding agent on cementitious substrates for Sikafloor 405/406
Used as the primer for the Sika Balcony Fast Cure I system.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product & Technical Data
- Application Details
- Application Conditions / Limitations
- Application Instructions
Features & Benefits
- For Professional use
- Significantly reduces the likelihood of outgassing from susceptible substrates
- Seals and primes substrates enabling over-coating at a minimum of 30 minutes (under ideal conditions)
- Combines a rapid cure time with a long pot life
- Helps to stabilise substrates
- Easy application by brush or roller
- Can be used between coats to locally address pin-holing
Product & Technical Data
Appearance / Colour | Colourless to pale yellow |
---|---|
Packaging | 11.5 litre (~ 11.78 kg) containers; 9l part A + 2.5l part B |
Storage Conditions / Shelf Life | 12 months from date of production if stored properly in original, unopened and undamaged sealed container in a cool, dry location away from direct sunlight |
Chemical Base | Two component solvent based polyurea |
Density | ~1.02 kg/l |
Flash Point | Part A: 40°C |
Part B: 73°C |
Application Details
Substrate Quality
Substrates should be free from laitance, dust, oil and grease achieved by wire brushing or mechanical preparation.
Substrate Preparation
Allow a minimum of 28 days before overcoating new concrete. The concrete should have a Pull off strength ≥1.5 N/mm 2 . Defects or damage to concrete decks must be made good using a proprietary polymer modified repair mortar. Any repairs should be allowed a minimum of 72 hours to cure and until such time as the moisture content has fallen to the permissible level.
Application Conditions / Limitations
Substrate Temperature | 5°C min. / 30°C max. |
Ambient Temperature | 5°C min. / 30°C max. |
Substrate Moisture Content | Visible damp free (maximum 18% wood moisture equivalent). |
< 6% pbw moisture content Test method: Sika ® -Tramex meter, < 4% CM - measurement or Oven-dry-method. | |
No rising moisture according to ASTM (Polyethylene sheet). | |
Dew Point | Beware of condensation! Surface temperature during application must be at least +5°C above dew point. |
Consumption | 1 or 2 coats with a consumption of ~0.130 kg/m 2 per coat depending upon surface roughness and absorption. |
Application Instructions
Mixing
- Part A : Part B = 78 : 22 ( by volume)
- Part A : Part B = 82 : 18 ( by weight)
Application Method / Tools
Ensure surface is dry and free from dust and laitance. Previously primed areas must be free from contamination before re-priming or top coating. Product may be applied to damp surfaces but these must not be visibly wet (see substrate moisture content).
Prepare primer by mixing the base until uniform. Add the activator and re-mix until homogeneous.
Apply between 5 and 30°C. Air and substrate temperatures should remain a minimum of 5°C above dew point throughout the application and curing periods.
Apply by brush or roller.
Brush or roller. Use brushes for small areas only.
Potlife
- 1 hour at 20°C
- Note: Pot life will decrease at higher temperatures.
Waiting Time / Overcoating
At 20°C:
- Dry to touch 10 minutes
- Dry through 30 minutes
- Apply an additional coat if more than 24 h pass before coating
Note: The product turns brown/yellow when kept exposed/unprotected by a coating
Cleaning of Tools
Clean all tools and application equipment with Thinner C immediately after use. Hardened / cured material can only be mechanically removed.
Notes on Application / Limitations
Do not apply in wet weather or to wet surfaces.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete
Flat Roofs - Application Method
- Brush
Roller - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4.5L
11.5L - Touch Dry (at 20°C)
- 10 minutes
- Dry to Recoat (at 20°C)
- 30 minutes
- Pot Life (at 20°C)
- 1 hour at 20°C
- Recommended Thinner/Cleaner
- Sika Thinner C
- Max. Application Temperature
- 30°C
- Min. Application Temperature
- 5°C
- Density
- ~1.02 kg/L
- UN Number
- UN3066
- Consumption
- Approx. 0.13 kg/m2 per coat
- Flashpoint
- Part A: 40°C
Part B: 73 °C - Base Type
- Solvent-Based
- Suitable For Use On
- Flat Roofs
- Suitable For Use On
- Concrete
- Application Method
- Roller
- Application Method
- Brush
- Manufacturer
- Sika
- Product Usage Type
- Primer
- Product Type
- Polyurea
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika Concrete Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Sika Thinner C
Sika Thinner C is a specially formulated blend of solvents designed to mix with its compatible Sika products to create an optimal consistancy for application whether it be for brush, roller or spray. It can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...
Sika Concrete Primer LO
2 component, low odour, rapid curing, high solids, hybrid polyurea primer used as a bonding agent on cementitious substrates for consistent and durable adhesion of Sikaroof, Sikalastic and Sikafloor Systems. Low odour application Fast curing - overcoating possible after 30 minutes Significantly reduces the likelihood of out-gassing from...