- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A clear/wood stain-coloured decorative lacquer for use over Thermoguard Fire Varnish Basecoat for exterior surfaces.
- Each 20m2 pack of Thermoguard Fire Varnish Exterior Overcoat is sufficient to apply the required 2 coats to 20m2 of surface area.
Important!
- Restricted to professional users. Not for sale to, or use by the general public.
- Should be used in most instances as one part of the following systems:
- Please note should you be unsure whether this product/system is suitable for your requirements please see below.
Product customisation
Don't forget to save your customization to be able to add to cartPlease note should you be unsure whether this product/system is suitable for your requirements please download and complete the 'Thermoguard Wood Enquiry Form' and return by email to [email protected]
Upon receipt our team will respond within 24-48 hours with specification/advice on our best suggestion for your project. If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).
Thermoguard Fire Varnish Overcoat (Exterior) is a decorative lacquer for use over Thermoguard Fire Varnish Basecoat for EXTERIOR surfaces. Each 20m2 pack of Thermoguard Fire Varnish Exterior Overcoat is sufficient to apply the required 2 coats to 20m2 of surface area.
Restricted to professional users. Not for sale to, or use by the general public.
Quick Links - Click To Jump To Section:
- Intended Use
- Preparation
- Application and Drying Conditions
- Application
- Mixing Ratio
- Spray Equipment Recommendation for Thermoguard Fire Varnish Overcoat (Exterior)
- Tip
Intended Use
A decorative lacquer for use over Thermoguard Fire Varnish Basecoat for EXTERIOR surfaces.
Preparation
As this is a topcoat/overcoat for Thermoguard Fire Varnish Basecoat - please refer to Thermoguard Fire Varnish Basecoat data sheet or specification for details.
Application and Drying Conditions
Ensure adequate ventilation. Maximum relative humidity during application and drying should be 75% with a minimum air temperature of 6°C.
Minimum surface temperature should be 3°C above dew point.
Avoid condensation.
Application
Apply Thermoguard Fire Varnish Basecoat as per manufacturers instructions, ensuring spreading rates and number of coats are adhered to depending on the level of fire protection to be achieved.
Leave a minimum of 36 hours in good drying conditions to dry HARD.
Within 96 hours of of Thermoguard Fire Varnish Basecoat becoming and remaining dry, apply Thermoguard Fire Varnish Exterior Overcoat by brush, roller or spray.
Mixing Ratio
10:1 vol:vol base:activator.
Apply first coat at 60 microns wet film thickness to give 30 microns dry.
Allow to cure for at least 2 hours.
Denib.
Apply second coat between 2 and 36 hours after first coat.
If overcoating after more than 36 hours, abrade to remove gloss and leave overnight before recoating.
Spray Equipment Recommendation for Thermoguard Fire Varnish Overcoat (Exterior)
Conventional pressure pot and gun.
Up to 10% Thermoguard Spray Shop Lacquer Thinners may be added to ease application.
Application by airless spray with 11 thou tip up to 5% Thermoguard Spray Shop Lacquer Thinner may be added.
Avoid contamination of basecoat with solvent.
Each 20m² pack of Thermoguard Fire Varnish Exterior Overcoat is sufficient to apply the required 2 coats to 20m² of surface area.
Tip
If only applying to 20m² (or less) of area, mix half of the supplied base with half of the supplied activator.
Apply to 20m² of Thermoguard Fire Varnish Basecoat. Mix the remaining halves of base and activator and apply a second coat of Thermoguard Fire Varnish Exterior Overcoat 2>36 hours after first coat.
Restricted to professional users. Not for sale to, or use by the general public.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Thermoguard
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt, Satin
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 20m2
- Mixing Ratio
- 10:1 vol:vol base:activator.
- Min. Application Temperature
- 6°C (air temperature), 3°C above dew point
- Recommended Wet Film Thickness
- 60 microns
- UN Number
- UN1263, UN2924
- Drying time
- Allow to cure for at least 2 hours.
- Dry to Recoat
- Apply second coat between 2 and 36 hours after first coat.
- Suitable For Use On
- Wood
- Finish
- Matt
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Varnish
- Product Range
- Fire Varnish
- Fastest Delivery
- Next Working Day
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Mahogany
- Colour Family
- Oak
- Colour Family
- Pine
- Colour Family
- Walnut
- Colour Family
- Ebony
- Colour Family
- Rosewood
- Colour Family
- Teak
- Colour Family
- Grey
Questions
Question about the product
Michael on 2022-06-29 11:32:51 | Question:
We’ve just built an annex for a customer and building control have turned round and said they won’t sign it off until we have painted in 30 minute fire proof paint. The building is finished in feather edge timber painted black. Can you recommend a product please? Ideally a clear Matt product please? |
Answer from Rawlins’ Technical Team:
Unfortunately for feather edged, shiplap or tongue and groove timber the maximum level of fire protection we can offer is Class 0. If this is acceptable to building control, approval is sought prior to application, the previously painted timber is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Thermoguard Timbercoat BS Class 1/0 & EN Class B System. This is available in many RAL, NCS or BS colours in a matt or eggshell finish. Unfortunately we cannot recommend a clear option for a previously painted substrate. | |
[email protected] on 2021-07-30 12:42:43 | Question:
Hello, If one uses Thermguard, could I overpaint it in an opaque colour at later point? Had a customer ask me, and I could not find an answer. I can see Enviorgraf say yes on theirs, but that for metal. If yes, any specific do or don'ts. I was anticipating the heat needed to cause an issue would destroy our paint before the intumescent part kicks in, but wanted to check for sure. Thanks Adam |
Answer from Rawlins’ Technical Team:
Unfortunately no we cannot recommend over painting a Thermoguard Fire Varnish system, this will effect the level of fire protection the system is achieving. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Thermoguard Fire Varnish Overcoat (Exterior) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Thermoguard Fire Varnish Basecoat
A clear intumescent varnish that is the first coat of a 2 coat system (3 coats externally) for the decorative Fire Protection of timber and timber derived substrates to BS Class 1, Class 0 and EN Class B s2 d0. See Thermoguard Fire Varnish Overcoat (Interior) or Thermoguard Fire Varnish Overcoat (Exterior) to complete the system. Complete...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...