Follow us on:

Axalta Plicote HB Finish | Exterior Masonry & Plastisol Rubber Coating

Axalta Plicote HB Finish

02PLH
AXA4944

Axalta Plicote HB Finish is a highly durable acrylated rubber coating that is suitable for direct application onto suitably prepared exterior masonry and Plastisol cladding, where the product offers anti-carbonation properties and a reduction in the ingress of water and chlorine ions.

  • Can be used for overcoating surfaces previously painted with acrylated rubber coatings
  • Conforms to Category (c) of Directive 2004/42/EC which carries a VOC limit of 430g/l
  • Finish coat with over 400 colours available from RAL and BS
  • Please note that this product is subject to a minimum order size of 200 litres (40 x 5lt)

Please Note: This product is available as Price On Application only

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£0.00(incl. VAT)
£0.00(ex. VAT)
Quantity
Please choose your colour
This Product is Price on Application Only

The minimum purchase order quantity for the product is 40.

No queries yet, leave the first!
Description

Axalta Plicote HB Finish is a highly durable acrylated rubber coating that is suitable for direct application onto suitably prepared exterior masonry and Plastisol cladding, where the product offers anti-carbonation properties and a reduction in the ingress of water and chlorine ions.

Can be used for overcoating surfaces previously painted with acrylated rubber coatings – please consult Axalta Coating Systems or Rawlins Technical for advice on 0113 2455450 (option 2) or send a message to [email protected].



Quick Links - Click To Jump To Section:




Features & Benefits


  • Highly durable acrylated rubber coating
  • For masonry and cladding
  • Finish coat with over 400 colours available from RAL and BS
  • Suitable for direct application onto suitably prepared exterior masonry and Plastisol cladding
  • Can be used for overcoating surfaces previously painted with acrylated rubber coatings
  • Subject to a minimum order size of 200 litres



Approvals/Certification


Conforms to Category (c) of Directive 2004/42/EC which carries a VOC limit of 430g/l.



Product Data


Product Data
Finish Semi-gloss
Volume Solids 50 ± 2% (may vary with colour)
VOC Content 430 + 20 g/litre (may vary with colour)
SG 1.20 kg/lt (may vary with colour)
Storage Conditions Store in dry, cool conditions and protect from frost
Shelf Life Minimum 12 months if stored as above in unopened containers
Flash Point 23-60℃



Film Thickness Range And Coverage


Film Thickness Range And Coverage
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Typical 40 µm 80 µm 12.5 m2litre
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated



Drying Times


Drying Times
Applied to 40 microns DFT   10℃ 23℃ 35℃
Dust Free   4 hr 2½ hr 2 hr
Hard Dry   7 hr 5 hr 2 hr
Overcoating Minimum 9 hr 7 hr 6 hr
Maximum Indefinite if surface is clean and sound
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation



Surface Preparation


  • All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams
  • Masonry: seal unsound or uncoated substrates with Stormcote Stabilising Sealer. Apply two full coats of Plicote HB Finish
  • Plastisol cladding: Prepare any bare metal areas to St2 standard minimum and spot prime with Speedspray QDH Primer, before applying Plicote HB Finish
    • HP200 (leather-grain type): if fresh, solvent wash with White Spirit to remove surface deposits. If weathered – no solvent washing required
    • HPS200 (dimpled type): not recommended, use instead ViterClad 50



Mixing


Must be mixed thoroughly by using a mechanical agitator before use.

Agitate periodically to ensure paint remains homogeneous.



Thinner / Cleaner


Axalta Thinner General Industrial TH004 (formerly called No.7 Thinner)



Application Conditions


Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent.

During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3℃ above the dew point. Paint temperature should ideally be at a minimum of 15℃.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  Yes Yes Yes Yes

  • Airless Spray: Output fluid pressure at tip 2000-2500 psi, Tip Size 17-19 thou (0.43-0.48 mm). Thin up to 5% if required
  • Conventional spray – thin up to 10% if required
  • Brush/roller – do not thin



Product Notes


  • Do not allow contact of oils or solvents as these will soften the coating
  • This coating has not been tested to the standard of the new regulation 7(2) of the Building Regulations 2010, which came into force in Dec 2018
Product Details
4944-914707

Data sheet

Manufacturer
Axalta
For Use By
Professional Use
Interior / Exterior Use
Exterior Use
For Use On
Masonry Surfaces, Plastisol, Acrylated rubber
Application Method
Airless Spray, Conventional Spray, Brush, Roller
Sheen
Semi-Gloss
Single, Two or Three Pack
Single
Product Certifications
Category (c) of Directive 2004/42/EC
Pack Size
5L
Min. Application Temperature
10°C
Solids by Volume
50 ± 2% (may vary with colour)
VOC
430g/l
Shelf Life (from date of manufacture)
Minimum 12 months
Recommended Dry Film Thickness
40 µm
Recommended Wet Film Thickness
80 µm
UN Number
UN1263
Dry to Recoat (at 23°C)
7 hr
Specific Gravity
1.20 kg/lt (may vary with colour)
Hard Dry
5hr at 23℃
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Suitable For Use On
Masonry
Suitable For Use On
Cladding
Application Method
Brush
Application Method
Roller
Application Method
Spray
Product Usage Type
Topcoat
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
White
Colour Family
Neutral
Colour Family
Dark
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Categorised As
Smooth Masonry Finishes
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Axalta Plicote HB Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
Axalta ViterClad 50 Finish | Cladding Paints

Axalta ViterClad 50 Finish

2 pack recoatable polyurethane finish in 350+ semi-gloss colours specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Expected system lifetime up to 15 years (depending on exposed environment and shade). Suitable for PVF2,...

Price £137.41 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Axalta Speedspray QDH Primer | Fast Drying for In-Shop Steelwork

Axalta Speedspray QDH Primer

Use Axalta Speedspray QDH Primer for in-shop spray application to steelwork. It has excellent drying and enamel hold-out, which makes it an ideal base for top coating with Hi-Dur AD100 Finish, with good adhesion and corrosion resistance. Modified-alkyd zinc phosphate primer High build Use as a primer where fast drying properties are...

Price £63.05 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Axalta Thinner General Industrial TH004 | Axalta Thinner No. 7

Axalta Thinner General Industrial TH004

Use Axalta Thinner General Industrial TH004 (formerly known as Axalta Thinner No. 7) to thin and clean related Axalta products, such as Plicote HB Finish.

Price £65.81 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery