Pyroplex 200 Series Slimline Pipe Collars have been specifically designed to reinstate the fire resistance of a wall or floor which has been penetrated by plastic flammable pipes used in soil, waste and drainage services. The collars will seal closed flammable pipes from a 55mm to 160mm diameter and can be face fixed to a wall or ceiling structures, suitable for use on concrete, masonry and plasterboard partitions.

Tested in accordance with EN1366-3, achieving a fire resistance period of up to 120 minutes (depending upon the application), classified in accordance with EN13501-2: 2007, classification report No. 412471. ETA is issued in accordance with (EU)No.305/2011 based upon EAD350454-00-1104 - ETA 19/0440

Pyroplex 200 Series SL Pipe Collars have been specifically designed to prevent the passage of fire and hot gases through:

• Concrete and masonry constructions - Suitable for plasterboard partitions 55mm to 160mm
• Soil, waste and drainage ‘above ground’ applications
• Suitable for plastic flammable pipes with PVC-C, PVC-U, PE, PP, ABS and SAN+PVC pipes

Quick Links - Click To Jump To Section:

• Features & Benefits
• Installation Instructions
• Masonry Wall and Floor Constructions
• Flexible Partition Walls
• Quality Approval
• Ordering References
• Field of Application

Features & Benefits

• Pyroplex 200 Series SL Pipe Collars have achieved a fire resistance of up to 120 minutes
• Pyroplex 200 Series SL Pipe Collars have a zintec coated steel outer casing
• Embossed for identification and traceability purposes
• Tab closing device means the collars are easy to fix in place around the pipe androtate or slide into position
• Intumescent material is totally unaffected by water, is robust, ‘non-flaking’ and difficult to tear
• Reinstate the fire resistance of walls or floors penetrated by plastic flammable pipes used in soil, waste and drainage services
• Seal closed flammable pipes from a 55mm to 160mm diameter
• Can be face fixed to a wall or ceiling structures
• Suitable for use on concrete, masonry and plasterboard partitions

Installation Instructions

Masonry Wall and Floor Constructions

Further information on the general supporting construction, pipe diameters and pipe wall thicknesses can be referenced in the Declaration of Performance

1. Ensure the substrate around the pipe is flat and free from obstructions – if necessary make good by using Pyroplex CE Intumescent Acrylic Sealant around the perimeter.
2. Release the retaining pin and position the pipe collar around the pipe.
3. Slide the tab through the slot in the pipe collar and fold back 180˚ to secure.
4. Secure the pipe collar by drillingholes in the structure by using fixing lugs as a template. To fix,use metal sleeve anchor M6 x 65s or CE marked alternative anchors. Do not use plastic raw plugs and/or plastic sleeve anchors.
5. When the collar has been securely fitted into place, any residual gaps between the collar and the substrate can be filled using Pyroplex CE Intumescent Acrylic Sealant.

Flexible Partition Walls

Flexible partitions - fully insulated or insulated partitions. Refer to Declaration of Performance which define the field of application for the supporting construction.

1. Ensure the substrate around the pipe is flat and free from obstructions – if necessary, make good by using Pyroplex CE Intumescent Acrylic Sealant around the perimeter.
2. Release the retaining pin and position the pipe collar around the pipe.
3. Slide the tab through the slot in the pipe collar andfold back 180˚ to secure.
4. Secure the pipe collar by drilling holes in the structureand using fixing lugs as a template. To fix,use Fishcer HM 6 x 65s or CE marked alternative anchors.
5. When the collar has been securely fitted into place, any residual gaps between the collar and the substrate can be filled usingPyroplex CE Intumescent Acrylic Sealant.

Typical Installation - wall application - Masonry wall construction

Quality Approval

Pyroplex Limited have a Quality Management System that meets the requirements of ISO 9001 and an Environmental Management System that meets the requirements of ISO 14001, both are independently verified by BSI Quality Assurance under Certificate Numbers FM10371 and EMS 637894. Copies of these certificates are available to download from the data sheets tab further above.

Ordering References

Field of Application

Table 1 - UPVC pipe – Flexible and Rigid Wall [100mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed both sides of the supporting construction

Table 2 - Polypropylene pipes – Flexible and Rigid Wall [100mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed both sides of the supporting construction

Table 3 - Polyethylene pipes – Flexible and Rigid Wall [100mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed both sides of the supporting construction

Table 4 - UPVC pipe – Rigid Floor [150mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed to the underside of the supporting construction

Table 5 - Polypropylene pipes – Rigid Floor [150mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed to the underside of the supporting construction

Table 6 - Polyethylene pipes – Rigid Floor [150mm minimum thickness]

Pyroplex 200 Series SL Pipe Collars to be installed to the underside of the supporting construction

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.