Hi, Can the product be used on a DDA complaint external ramp which is brushed finish concrete? The ramp has no protection from elements so the paint will be wet when it rains. Will it remain antislip? Thanks Gavin

As far as we are aware DDA (Disability Discrimination Act) compliance only refers to the gradient and width of the ramp (as well as handrail height) so it doesn’t have any bearing on the wearing surface materials. 704 MMA Flexible Anti-Slip Coating Concrete Grade is suitable for the application although we would recommend mechanical preparation first. If no mechanical prep is possible, the substrate is clean, dry, sound and prepared as detailed in the technical data sheet then 706 MMA Floor Primer should be used to seal the surface first. Although adhesion is only guaranteed if mechanical prep is carried out. This paint will still have a level of anti-slip wet or dry.

704 MMA Flexible Anti-Slip Coating Concrete Grade

704 MMA Flexible Anti-Slip Coating Concrete Grade

Reference RAW704

Brand Rawlins Paints

Search ID RAW4976

2 pack, fast curing flexible coating for concrete surfaces in 10 colours. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared steel surfaces. Ideal for parking bays, car parks, balconies, walkways, etc.

Easily applied, no primer required
Cures at low temperatures - as low as 0°C*
Also available in 4,000+ colour options from RAL, BS and NCS
- Please see 704 MMA Flexible Anti Slip Coating Concrete Grade - Special Colours
Images are for illustrative purposes only and may differ from the actual product
This product is for Professional Use Only

*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£86.83(incl. VAT)

£72.36(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

1 question about the product

Description

704 MMA Flexible Anti Slip Coating Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties.

The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin.

704 MMA Flexible Anti Slip Coating Concrete Grade allows a fast return to service.

This product is for Professional Use Only.

Recommended Uses:

As a tough, durable, slip resistant coating for concrete substrates
Can also be used on correctly prepared steel surfaces
Delineating parking bays, car parks, balconies, walkways, etc

Features & Benefits

For concrete surfaces
Provides a seamless floor finish with protective and decorative properties
Light foot traffic after just 1 hour at 20°C
Slip resistant
Can also be used on correctly prepared steel surfaces
Two-pack
Tough and abrasion resistant
Easily applied, no primer required
Flexible
Wide range of colours
Cures at low temperatures - as low as 0°C*

*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Typical Properties

Technical Data
	704 MMA Flexible Anti Slip Coating CG
Pot life @ 20°C:	15 Minutes
Pot life @ 10°C	20 minutes
Tensile strength:	12MPa
Elongation at break:	50%
Adhesion to concrete:	3MPa (substrate failure)
Temp. range during application:	0°C* to + 40°C
Temp. range during service:	-30°C to + 60°C

*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Chemical Resistance
Chemical	Resistance
Dilute Acids and Alkalis	Excellent
Oil	Excellent
Petrol	Excellent
Diesel	Excellent
Vegetable Oils	Excellent
Fruit Juices	Excellent

Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.

Coverage

A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²

Surface Preparation

Concrete surfaces must be clean, dry and free from contaminants
New concrete substrates must be allowed to cure for a minimum period of 28 days
Mechanical preparation by vacuum shot blasting/grit blasting is recommended when the material is being applied to concrete or steel surfaces to provide a mechanical ‘key’

Priming:

Primer not normally required for concrete
Porous concrete substrates should be primed with 706 MMA Floor Primer

Notes:

For application to Asphalt/Tarmac surfaces instead see 703 MMA Flexible Anti-Slip Coating.

Damp concrete surfaces can be primed using 709 MMA Damp Proof Primer – refer to product data sheet for full details.

Steel surfaces which cannot be prepared by way of shot/grit blasting may be instead primed using 707 MMA Metal Primer – however this will result in lower performance characteristics - refer to product data sheet for full details.

Mixing:

704 MMA Flexible Anti Slip Coating CG is supplied as a two pack material consisting of the base component, and the catalyst component
Incorporate the catalyst component under mechanical stirring and mix for 1-2 minutes

Mixing Ratio:

(% Catalyst by Weight) = 2

Application

Apply 704 MMA Flexible Anti Slip Coating CG using short nap perlon, smooth lambswool rollers or squeegee at a nominal rate of 1-2kg/m²
On porous or open surfaces a second coat may be required

Cleaning

Clean equipment with 109 Tool Cleaner immediately after use

Curing

Light Foot Traffic: 1 hour @ 20°C
Vehicular Traffic: 2 Hours @ 20°C
Full chemical resistance: 24 hours @ 20°C

Limitations

Do not apply directly to damp substrates

704 MMA Flexible Anti Slip Coating CG will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered.

Storage & Shelf Life

Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
Adequate ventilation of the storage area should be provided
Keep container tightly closed when not in use
704 MMA Flexible Anti Slip Coating CG has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions

Health & Safety

704 MMA Flexible Anti Slip Coating CG is flammable during application, so adequate safety precautions should be observed.

Avoid contact of the material with skin and eyes
Wear gloves and goggles
Wash off splashes immediately with soap and water
Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
Please refer to Material Safety Data Sheet for additional information
704 MMA Flexible Anti Slip Coating CG shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Product Details

Reference 4976-863080

Data sheet

Manufacturer: Rawlins Paints
For Use By: Professional Use
Interior / Exterior Use: Interior & Exterior
For Use On: Concrete, Steel
Application Method: Roller, Squeegee
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Two-Pack
Pack Size: 10KG
Key Features: Fast Curing
Touch Dry (at 20°C): 1 Hour
Fully Cured (at 20°C): 24 Hours
Pot Life (at 20°C): 15 Minutes
Coverage: 1m² per KG
Recommended Thinner/Cleaner: 109 Tool Cleaner
Tensile Strength: 12MPa
Max. Application Temperature: 40°C
Min. Application Temperature: 0°C
Shelf Life (from date of manufacture): 6 months
UN Number (Activator): UN3106
UN Number (Base): UN1866
Elongation at break: 50%
Pot Life (at 10°C): 20 minutes
Suitable For Use On: Car Parks
Suitable For Use On: Concrete
Suitable For Use On: Steel
Suitable For Use On: Floors
Suitable For Use On: Concrete Floors
Suitable For Use On: Balconies
Suitable For Use On: Walkways
Suitable For Use On: Steel Floors
Suitable For Use On: Parking Bays
Suitable For Use On: Concrete Walkways
Finish: Matt
Application Method: Roller
Application Method: Squeegee
Components: 2K
Usages: Anti-Slip
Product Usage Type: Topcoat
Product Category: Paints
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Yellow
Colour Family: Black
Colour Family: White
Categorised As: Floor Paints > Low Temperature Anti-Slip Floor Paints
Seasonal: Cold Weather
Product Type: MMA

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Gavin Tucker on 2022-04-27 08:34:07	Question: Hi, Can the product be used on a DDA complaint external ramp which is brushed finish concrete? The ramp has no protection from elements so the paint will be wet when it rains. Will it remain antislip? Thanks Gavin
	Answer from Rawlins’ Technical Team: As far as we are aware DDA (Disability Discrimination Act) compliance only refers to the gradient and width of the ramp (as well as handrail height) so it doesn’t have any bearing on the wearing surface materials. 704 MMA Flexible Anti-Slip Coating Concrete Grade is suitable for the application although we would recommend mechanical preparation first. If no mechanical prep is possible, the substrate is clean, dry, sound and prepared as detailed in the technical data sheet then 706 MMA Floor Primer should be used to seal the surface first. Although adhesion is only guaranteed if mechanical prep is carried out. This paint will still have a level of anti-slip wet or dry.

IMPORTANT SHIPPING & DELIVERY INFORMATION

704 MMA Flexible Anti-Slip Coating Concrete Grade is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

703 MMA Flexible Anti-Slip Coating

2 pack, fast curing flexible coating in 10 colours usually for tarmac and asphalt surfaces. Provides a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared concrete and steel surfaces. Ideal for delineating parking bays, car parks, balconies, etc. Rapid curing - light foot...

£86.83 (incl. VAT)

Shop now

In Stock and Available for Delivery

706 MMA Floor Primer

A rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds. Ideal for use as a rapid curing primer for concrete, steel, masonry,...

£135.07 (incl. VAT)

Shop now

In Stock and Available for Delivery

707 MMA Metal Primer

A rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water Pre-packed units ready for use...

£135.07 (incl. VAT)

Shop now

In Stock and Available for Delivery

709 MMA Damp Proof Primer

Developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C*. Very good chemical resistance. Excellent adhesion to damp concrete. Impervious to water. Pre-packed units ready for use. Easily applied. Can be overcoated...

£135.07 (incl. VAT)

Shop now

In Stock and Available for Delivery

704 MMA Flexible Anti-Slip Coating Concrete Grade