- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Axalta ViterLac ABV Alkyd HB Gloss Finish is a one-component, modified alkyd, high gloss finish which has high build properties when applied by brush or spray. For use on agricultural and earth moving equipment and general steelwork.
- Where a relatively fast drying high build gloss finish is required
- Wide colour range of over 350+ RAL and BS shades
- Fast drying minimises dust contamination to give a durable high gloss finish
- Hard Dry in 4 hours at 23°C
- For use as a finish coat over ViterPrime 035 and other alkyd primers
- For application by airless spray with a high degree of sag resistance for spraying on difficult configurations
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartAxalta ViterLac ABV Alkyd HB Gloss Finish is a modified alkyd, high gloss finish which has high build properties when applied by brush or spray. For use on agricultural and earth moving equipment and it is ideal for structural steelwork.
Axalta ViterLac ABV Alkyd HB Gloss Finish has excellent sag resistance and is fast drying, minimising dust contamination to give a durable high gloss finish, and it is available in a wide range of colours.
Approvals/Certification - Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected].
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Modified alkyd, high gloss finish
- High build properties when applied by brush or spray
- For use on agricultural and earth moving equipment
- Ideal for structural steelwork
- Wide colour range of over 350+ RAL and BS shades
- Excellent sag resistance
- Hard Dry in 4hrs at 23°C
- Should be applied over a suitable priming system
Product Specification
Technical Data | |
---|---|
Axalta ViterLac ABV Alkyd HB Gloss Finish | |
Volume Solids | 42 ± 2% (varies with colour) |
VOC Content | 481 + 20 g/litre (varies with colour) |
SG | 1.09 – 1.20 kg/lt (varies with colour) |
Storage Conditions | Store in dry, cool conditions and protect from frost |
Shelf Life | Minimum 12 months if stored as above in unopened containers |
Flash Point | 23-60°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
Minimum | 50 µm | 119 µm | 8.4 m2/litre |
Maximum | 80 µm | 190 µm | 5.2 m2/litre |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated |
Drying Times
Product Data | ||||
---|---|---|---|---|
Applied to 60 microns DFT | 10℃ | 23℃ | 35℃ | |
Dust Free | 2 hr | 1 hr | 45 min | |
Hard Dry | 8 hr | 4 hr | 3 hr | |
Overcoating | Minimum | 24 hr | 16 hr | 10 hr |
Maximum | Indefinite if clean and sound | |||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation |
Surface Preparation
- This product is a finish coat and should be applied over an appropriate primer and/or intermediate coat, please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected] for advice
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination
Mixing
- Must be mixed thoroughly by using a mechanical agitator before use
- Agitate periodically to ensure paint remains homogeneous
Thinner
Thinner:
- 1050 Thinner (1006 for spraying)
Equipment Cleaner:
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing
- Do not apply when rain, mist, sleet or snow are imminent
- During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and the steel temperature should remain at least 3°C above the dew point
- Paint temperature should ideally be at a minimum of 15ºC
Application Methods
- Airless Spray: Output fluid pressure at tip 1800-2500 psi min., Tip Size 11-19 thou (0.28-0.48 mm)
- Application by brush will provide 50-60 microns dft
- Avoid exceeding maximum dry film thickness or drying problems may result
Product Notes
- Overcoating: this product is designed as finish coat. If overcoating, the compatibility of topcoats should be confirmed prior to application
- Some shades may contain lead based colourants and these are labelled (L)
- Not recommended for immersion
- For best opacity use a primer or undercoat of a suitable shade
Health & Safety
- Containers are provided with safety labels which should be observed
- Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Axalta
- Interior / Exterior Use
- Exterior Use
- For Use On
- Steel
- Application Method
- Airless Spray, Brush
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Minimum Applied Thickness
- 50 µm
- Maximum Applied Thickness
- 80 µm
- Touch Dry (at 20°C)
- 60 mins
- Coverage
- 5.2m²/litre at 50 µm DFT, 8.4m²/litre at 50 µm DFT
- Recommended Thinner/Cleaner
- 1050 Thinner/1006 Thinner
- Min. Application Temperature
- Steel temperature should remain at least 3°C above the dew point
- Solids by Volume
- 42 ± 2% (varies with colour)
- Shelf Life (from date of manufacture)
- Minimum 12 months if stored as above in unopened containers
- UN Number
- UN1263
- Dry for Topcoat (at 23°C)
- 16 hrs
- Touch Dry (at 23°C)
- 1 hr
- Specific Gravity
- 1.09 – 1.20 kg/lt (varies with colour)
- Hard Dry
- 4 hrs @23°C
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Structural Steelwork
- Suitable For Use On
- Agricultural Equipment
- Suitable For Use On
- Earth Moving Equipment
- Suitable For Use On
- General Use
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Sag Resistance
- Product Usage Type
- Topcoat
- Product Range
- ViterLac
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Resistance to
- Sag
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterLac ABV Alkyd HB Gloss Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Axalta 1006 Thinner
We no longer stock this product, but can recommend Axalta Thinner Fast Industrial (TH120) as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team...
Axalta ViterPrime 035 Primer/Finish
Axalta ViterPrime 035 Primer/Finish is a fast drying, high build alkyd zinc phosphate anticorrosive primer or primer/finish for structural steelwork. Designed for shop application by airless spray Can be used as an anticorrosive primer/finish or be overcoated with conventional or two-pack polyurethane topcoats such as ViterThane PLV...
Axalta 1050 Thinner
We no longer stock this product, but can recommend Axalta TH400 Thinner as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...