- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Pilot ACR Aluminium is a one component physically drying acrylic coating recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
- An easy to use one component acrylic finish coat
- Fast drying - product is touch dry in 15 minutes at 23°C
- Can be used direct to metal
- Used as topcoat in atmospheric environments
- It can be applied at sub zero surface temperatures
- Also suitable for marine use - topside and superstructure
- Product is certified not to spread surface flames
Description
Jotun Pilot ACR Aluminium is a one component physically drying acrylic coating that has a semi gloss finish with good gloss retention. It is a high build product that is fast drying and can be used direct to metal. To be used as a topcoat in atmospheric environments and can be applied at sub zero surface temperatures.
Recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. For marine use it is recommended for topside and superstructure.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Approvals & Certificates
- Product Data
- Film Thickness
- Surface Preparation
- Application
- Drying & Curing Time
- Heat Resistance
- Product Compatibility
- Storage & Shelf Life
- Caution
- Health & Safety
Features & Benefits 
- One component physically drying acrylic coating
- Recommended for refineries, power plants, bridges and buildings
- Fast drying - product is touch dry in 15 minutes at 23°C
- Can be used direct to metal
- Used as topcoat in atmospheric environments
- It can be applied at sub zero surface temperatures
- Also suitable for marine use - topside and superstructure
Approvals & Certificates
- Grain, Newcastle Occupational Health
- When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment
- Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
Additional certificates and approvals may be available on request.
Product Data
| Technical Data | |
|---|---|
| Solids by volume | 55 ± 2 % |
| Gloss level (GU 60 °) | Semi Gloss (35-70) |
| Flash point | 25 °C |
| Density | 1.5 kg/l |
| VOC-EU | 395 g/l |
The provided data is typical for factory produced products, subject to slight variation depending on colour.
Film Thickness
| Recommended Film Thicknesses | Theoretical Spreading Rate | |
|---|---|---|
| Dry | Wet | |
| 60µm | 110µm | 9.2m²/l |
| 120µm | 220µm | 4.6m²/l |
Surface Preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination.
| Surface Preparation | ||
|---|---|---|
| Substrate | Minimum | Recommended |
| Carbon Steel | St 2 (ISO 8501-1) | Sa 2½ (ISO 8501-1) |
| Galvanised Steel | The surface shall be clean, dry and appear with a rough and dull profile | Light brush blasting using non-metallic abrasive leaving a clean, rough and even pattern |
| Shop Primed Steel | Clean, dry and undamaged shop primer (ISO 12944-4 6.1) | Clean, dry and undamaged shop primer (ISO 12944-4 6.1) |
| Coated Surfaces | Clean, dry and undamaged compatible coating (ISO 12944-4 6.1.4) | P Sa 2½ (ISO 8501-2) |
Application
Application Methods:
- Spray: Use airless spray (thin 5 %)
- Brush: Use a suitable brush. Care must be taken to achieve the specified dry film thickness
- Roller: May be used, but is not recommended for first coat on bare metal. Care must be taken to achieve the specified dry film thickness
Please refer to the Application Guide (AG) for this product.
Product Mixing:
- Single Pack
Thinner/Cleaning Solvent:
- Thinner: Jotun Thinner No. 7
Guiding Data for Airless Spray:
- Nozzle tip (inch/1000): 15-21
- Pressure at nozzle (minimum): 150 bar/2100 psi
Drying & Curing Time
| Substrate Temperature | -10 °C | 0 °C | 5°C | 10°C | 23°C | 40°C |
|---|---|---|---|---|---|---|
| Surface (touch) dry | 30 min | 30 min | 20 min | 15 min | 15 min | 15 min |
| Walk-on-dry | 7 h | 7 h | 7 h | 5 h | 4 h | 4 h |
| Dry to over coat, minimum | 3 h | 3 h | 3 h | 2h | 1h | 1h |
- For maximum overcoating intervals, refer to the Application Guide (AG) for this product
- Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and at average of the DFT range for the product
- Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness
- Walk-on-dry: Minimum time before the coating can tolerate normal foot traffic without permanent marks, imprints or other physical damage
- Dry to over coat, minimum: The recommended shortest time before the next coat can be applied
Heat Resistance
| Temperature | ||
|---|---|---|
| Continuous | Peak | |
| Dry, atmospheric | 60 °C | - |
The temperatures listed relate to retention of protective properties. Aesthetic properties may suffer at these temperatures.
Product Compatibility
Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product. Some examples are shown below.
Previous Coat:
- Epoxy, epoxy mastic, acrylic
Subsequent coat:
- Acrylic
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Storage & Shelf Life
Shelf life at 23 °C
- 48 Months
In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf life, thereafter the paint quality is subject to re-inspection.
Caution
- This product is for professional use only
- The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun's technical documentation
- Applicators and operators shall use appropriate personal protection equipment when using this product
- This guideline is given based on the current knowledge of the product
- Any suggested deviation to suit the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing the work
Health & Safety
- Please observe the precautionary notices displayed on the container
- Use under well ventilated conditions
- Do not inhale spray mist
- Avoid skin contact
- Spillage on the skin should immediately be removed with suitable cleanser, soap and water
- Eyes should be well flushed with water and medical attention sought immediately
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Product Details
5028-807085
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel, Galvanized Steel
- Application Method
- Brush, Roller, Airless Spray
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- Low Flame Spread in accordance with EU Directive for Marine Equipment, Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
- Pack Size
- 5L, 20L
- Minimum Applied Thickness
- 60μm DFT
- Maximum Applied Thickness
- 120μm DFT
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 15 Mins
- Coverage
- 4.6 to 9.2m² per litre
- Recommended Thinner/Cleaner
- Jotun Thinner No. 7
- Max. Application Temperature
- 50°C
- Min. Application Temperature
- -10°C
- Density
- 1.5 kg/l
- Solids by Volume
- 55 ± 2 %
- Heat Resistance (up-to)
- 60 °C
- Shelf Life (from date of manufacture)
- 48 Months
- Touch Dry
- 15 mins
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- 1 hour
- Touch Dry (at 23°C)
- 15 mins
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Direct to Metal
- Product Usage Type
- Topcoat
- Product Range
- Pilot
- Colour Family
- Aluminium
- Categorised As
- Metal Paints > Low Temperature Direct-to-Metal Paints
- Seasonal
- Cold Weather
- Product Type
- Acrylic
- Environment
- Atmospheric
- Environment
- Low Temperature
- Touch Dry/Dust Free (@ 20-25°C)
- 15 mins
- Product Attributes
- Gloss Retention
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Pilot ACR Aluminium is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Jotun Pilot ACR
Jotun Pilot ACR is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. An easy to use one component acrylic finish coat with special features to help your painting schedule become more effective Pilot ACR features direct-to-metal (DTM), high build and fast drying properties,...
Price
£63.89
(incl. VAT)
In Stock and Available for Delivery
Jotun Thinner No. 7
Jotun Thinner No. 7 is a paint thinner designed to improve the flow of a range of Jotun acrylic, vinyl and antifouling coatings. It can also be used as a cleaner of pumps and tools after and before painting.
Price
£28.09
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery