- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Axalta ViterPrime 035 Primer/Finish is a fast drying, high build alkyd zinc phosphate anticorrosive primer or primer/finish for structural steelwork.
- Designed for shop application by airless spray
- Can be used as an anticorrosive primer/finish or be overcoated with conventional or two-pack polyurethane topcoats such as ViterThane PLV (gloss) or PLS (semi-gloss)
- Hard dry in 90 mins at 23°C
- Excellent build properties and hold-up on edges
- Wide colour range of over 350+ RAL and BS shades to suit all finishing shades
- Can be used as a base coat for most thin film intumescent coatings
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartAxalta ViterPrime 035 Primer/Finish is a fast drying, high build alkyd zinc phosphate anticorrosive primer or primer/finish for structural steelwork.
Axalta ViterPrime 035 Primer/Finish is designed for shop application by airless spray. It is broadly compatible as a base coat for most thin film intumescent coatings.
Approvals/Certification - Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected].
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- For structural steelwork
- High build alkyd zinc phosphate primer
- For airless spray in-shop application
- For use as a primer or primer/finish for structural steelwork
- Wide colour range of over 350+ RAL and BS shades to suit all finishing shades
- Can be used as an anticorrosive primer/finish or be overcoated with conventional or two-pack polyurethane topcoats such as ViterThane PLV (gloss) or PLS (semi-gloss)
- Hard Dry in 90 mins at 23°C
- Excellent build properties and hold-up on edges
- Can be used as a base coat for most thin film intumescent coatings
Product Specification
Technical Data | |
---|---|
Axalta ViterPrime 035 Primer/Finish | |
Volume Solids | 58 ± 2% (may vary with colour) |
VOC Content | 415 + 20 g/litre (varies considerably with colour) |
SG | 1.47 kg/lt (may vary with colour) |
Storage Conditions | Store in dry, cool conditions and protect from frost |
Shelf Life | Minimum 12 months if stored as above in unopened containers |
Flash Point | 23-60°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
Minimum | 75 µm | 129 µm | 7.7 m2/litre |
Maximum | 150 µm | 258 µm | 3.9 m2/litre |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated |
Drying Times
Product Data | ||||
---|---|---|---|---|
Applied to 75 microns DFT | 10℃ | 23℃ | 35℃ | |
Dust Free | 40 min | 15 min | 10 min | |
Hard Dry | 2.5 hr | 1.5 hr | 45 mins | |
Overcoating | Minimum | See Product Notes | ||
Maximum | Indefinite if clean and sound | |||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation |
Surface Preparation
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination
- Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams
- Blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns
Mixing
- Must be mixed thoroughly by using a mechanical agitator before use
- Agitate periodically to ensure paint remains homogeneous
Thinner
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing
- Do not apply when rain, mist, sleet or snow are imminent
- During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and the steel temperature should remain at least 3°C above the dew point
- Paint temperature should ideally be at a minimum of 15ºC
Application Methods
- Airless Spray: Output fluid pressure at tip 2000-2500 psi, tip Size 17-19 thou (0.43-0.48 mm)
- Thinning of the coating is not recommended as this will reduce the build qualities
- Application by brush/roller will result in a reduced film thickness and is recommended only for small areas of touch up/remedial work
Product Notes
- Overcoating:
- May be overcoated with itself or other products from the ViterLac, ViterChlor or ViterThane range
- When the primer has been applied to 75 microns DFT, allow a minimum of 4 hours at 23ºC before overcoating with ViterLac intermediates/finishes or ViterThane PLS/PLV
- Allow longer intervals if applying at lower temperatures and higher film builds
- The compatibility and suitability of overcoating etc. should be confirmed prior to application
- In common with most alkyd primers, this product is not recommended for extended exterior exposure, exposure in aggressive or coastal locations, or for immersion - epoxy primers are preferred for these conditions - please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information
- Some shades may contain lead based colourants and these are labelled (L)
Health & Safety
- Containers are provided with safety labels which should be observed
- Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Axalta Coating Systems
- For Use On
- Steel
- Application Method
- Airless Spray
- Sheen
- Matt
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 15L
- Minimum Applied Thickness
- 75 µm DFT/129 µm WFT
- Maximum Applied Thickness
- 150 µm DFT/258 µm WFT
- Touch Dry (at 20°C)
- 15 Mins
- Coverage
- 7.7 m² /litre @ 75 µm DFT
- Recommended Thinner/Cleaner
- Thinner 1006
- Min. Application Temperature
- 3°C
- Solids by Volume
- 58 ± 2% (may vary with colour)
- Shelf Life (from date of manufacture)
- Minimum 12 months if stored as above in unopened containers
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- 4 hrs
- Touch Dry (at 23°C)
- 15 mins
- Specific Gravity
- 1.47 kg/lt (may vary with colour)
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Matt
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Usages
- Primer/Finish
- Usages
- Overcoatable
- Usages
- Direct to Metal
- Usages
- High Build
- Usages
- In-Shop Application
- Product Usage Type
- Primer & Topcoat
- Product Range
- ViterPrime
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 15 mins
- Product Attributes
- High Build
- Product Attributes
- Primer/Finish
- Product Attributes
- Zinc Phosphate
- Product Attributes
- Overcoatable
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterPrime 035 Primer/Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Axalta ViterThane PLS Recoatable PU Finish
Axalta ViterThane PLS Recoatable PU Finish, A two pack recoatable polyurethane semi-gloss finish for use on protective systems for steelwork. Excellent colour retention and indefinitely overcoatable. Excellent chemical resistance and low temperature cure. An aliphatic polyurethane providing a tough and durable semi-gloss finish with...
Axalta 1006 Thinner
We no longer stock this product, but can recommend Axalta Thinner Fast Industrial (TH120) as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team...
Axalta ViterThane PLV Finish
Axalta ViterThane PLV Finish is a two pack recoatable polyurethane gloss finish for use on protective systems for steelwork. Provides a tough and durable gloss finish together with excellent gloss and colour retention Excellent chemical resistance and low temperature curing down to -5ºC Withstands dry heat up to 150ºC (discolouration may...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...