- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Axalta ViterThane PLV Finish is a two pack recoatable polyurethane gloss finish for use on protective systems for steelwork.
- Provides a tough and durable gloss finish together with excellent gloss and colour retention
- Excellent chemical resistance and low temperature curing down to -5ºC
- Withstands dry heat up to 150ºC (discolouration may occur)
- Gloss version of Axalta ViterThane PLS Recoatable PU Finish
- Wide colour range of over 300+ RAL and BS shades
- Use as a finish over high performance systems where longer term cosmetic properties and chemical resistance are required
- Use as a site or shop applied finish
- Easily cleaned gloss surface
- Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Axalta ViterThane PLV Finish is a two pack recoatable polyurethane gloss finish for use on protective systems for steelwork.
Axalta ViterThane PLV Finish is an aliphatic polyurethane providing a tough and durable gloss finish together with excellent gloss and colour retention. It has excellent chemical resistance and low temperature curing down to -5ºC.
Approvals/Certification - Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- For steelwork
- Two pack recoatable polyurethane gloss finish
- Use as a site or shop applied finish
- Provides a tough and durable gloss finish together with excellent gloss and colour retention
- Wide colour range of over 300+ RAL and BS shades to suit all finishing shades
- Excellent chemical resistance and low temperature curing down to -5ºC
- Withstands dry heat up to 150ºC (discolouration may occur)
- Gloss version of Axalta ViterThane PLS Recoatable PU Finish
- Use as a finish over high performance systems where longer term cosmetic properties and chemical resistance are required
- Use as a site or shop applied finish
- Easily cleaned gloss surface
- Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system
Product Specification
Technical Data | |
---|---|
Axalta ViterThane PLV Finish | |
Volume Solids | 53 ± 2% (may vary with colour) |
VOC Content | 431 + 20 g/litre (varies with colour) |
SG | 1.10-1.30 kg/lt mixed, varies with colour |
Storage Conditions | Store in dry, cool conditions and protect from frost |
Shelf Life | Minimum 12 months if stored as above in unopened containers |
Flash Point | 23-60°C |
Pot Life | 4 hours at 23ºC |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
Minimum | 30 µm | 57 µm | 17.7 m2/litre |
Maximum | 60 µm | 113 µm | 8.8 m2/litre |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated |
Drying Times
Product Data | ||||
---|---|---|---|---|
Applied to 40 microns DFT | 10℃ | 23℃ | 35℃ | |
Dust Free | 2 hr | 1 hr | 45 min | |
Hard Dry | 6 hr | 3 hr | 2 hr | |
Overcoating | Minimum | 24 hr | 12 hr | 10 hr |
Maximum | Indefinite if clean and sound | |||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation |
Surface Preparation
- This product is a finish coat and should be applied over an appropriate primer or intermediate coating
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts or other contamination
Mixing
- Mix only in the proportions stated, mixing each component individually then together using a mechanical agitator
- Agitate periodically during use to ensure product remains homogeneous
Mixing Ratio
- Base - 5 parts by volume
- Hardener - 1 part by volume
Thinner
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing
- Do not apply when rain, mist, sleet or snow are imminent
- During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and the steel temperature should remain at least 3°C above the dew point
- Only apply this product when the above conditions can be maintained throughout the critical application and drying/curing process
- Paint temperature should ideally be at a minimum of 15ºC
Application Methods
- Airless Spray: Output fluid pressure at tip 2200-2500 psi, Tip Size: 13-17 thou (0.33-0.43mm)
- This product is suitable for application by brush or roller, but due to its fast drying properties intricate structures should be avoided
- The addition of 5-10% of 1737 Thinner is recommended for best results when spraying. Metallic shades should be applied without thinning
Product Notes
- Drying/Overcoating times at +5 ºC (@ 40µm dft)
- Dust free – 3 hrs
- Hard dry – 9 hrs
- Min overcoating – 24hr
- For optimum opacity use a primer/undercoat of a suitable shade
- High humidity and condensation will impair gloss if exposed during application and curing
- Some shades (2905 line) may contain lead based colourants and these are labelled (L)
- Contains isocyanates – refer to Safety Data Sheet
- Metallic shades should be applied to 50 microns maximum dry film thickness to achieve the best appearance and should be applied over a suitable undercoat, viscosity and solids content are lower than for standard colours
Health & Safety
- Containers are provided with safety labels which should be observed
- Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Axalta Coating Systems
- For Use By
- Professional Use
- For Use On
- Steel
- Application Method
- Airless Spray, Brush, Roller
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Approved to UK Network Rail Protective Treatment M24 (Item No.7.3.1) as the finish coat of a 3 coat system
- Pack Size
- 5L
- Minimum Applied Thickness
- 30µm DFT/57µm WFT
- Maximum Applied Thickness
- 60µm DFT/113µm WFT
- Mixing Ratio
- Base 5 parts by volume/Hardener 1 parts by volume
- Touch Dry (at 20°C)
- 60 mins
- Coverage
- 17.7 m²/litre at 30µm DFT - 8.8 m² /litre at 60µm DFT
- Recommended Thinner/Cleaner
- Axalta 1737 Thinner
- Min. Application Temperature
- 3°C
- Solids by Volume
- 53 ± 2% (may vary with colour)
- Heat Resistance (up-to)
- Withstands dry heat up to 150ºC (discolouration may occur)
- Shelf Life (from date of manufacture)
- Minimum 12 months if stored as above in unopened containers
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Dry to Recoat (at 23°C)
- 12hrs
- Touch Dry (at 23°C)
- 1hr
- Pot Life
- 4 hours at 23ºC
- Hard Dry
- 3hrs at 23ºC
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Steelwork
- Finish
- Gloss
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Usages
- Chemical Resistance
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Easy to Clean
- Usages
- Heat Resistance
- Product Usage Type
- Topcoat
- Product Range
- ViterThane
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Categorised As
- Metal Paints > Low Temperature Topcoats
- Seasonal
- Cold Weather
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Environment
- Low Temperature
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Product Attributes
- Easy to Clean
- Product Attributes
- Tough / Durable
- Product Attributes
- High Build
- Resistance to
- Chemicals
- Resistance to
- Heat
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterThane PLV Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Axalta ViterThane PLS Recoatable PU Finish
Axalta ViterThane PLS Recoatable PU Finish, A two pack recoatable polyurethane semi-gloss finish for use on protective systems for steelwork. Excellent colour retention and indefinitely overcoatable. Excellent chemical resistance and low temperature cure. An aliphatic polyurethane providing a tough and durable semi-gloss finish with...
Axalta 1737 Thinner
Axalta 1737 Thinner, for use with the Axalta range of coatings, is a specially formulated blend of solvents designed to mix with its compatible paint/coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. It can also be used for the cleaning of some surfaces prior to application of the coating...
Axalta ViterPrime 035 Primer/Finish
Axalta ViterPrime 035 Primer/Finish is a fast drying, high build alkyd zinc phosphate anticorrosive primer or primer/finish for structural steelwork. Designed for shop application by airless spray Can be used as an anticorrosive primer/finish or be overcoated with conventional or two-pack polyurethane topcoats such as ViterThane PLV...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...