- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG HydroPrime 2K Epoxy is a water based 2K epoxy primer offering excellent adhesion and corrosion resistance to substrates.
- Two Pack Product (Base and Hardener)
- Multi substrate primer
- Can be overcoated with most HMG topcoat systems
- Low VOC
- Available in 3,500 colours from RAL, NCS, and British Standard
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG HydroPrime 2K Epoxy is a water based 2K epoxy primer offering excellent adhesion and corrosion resistance to substrates.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range and Coverage
- Drying Times
- Application
- Product Notes
- Health and Safety
Features & Benefits
- Multi substrate primer
- Can be overcoated with most HMG topcoat systems
- Low VOC
- Available in 3,500 colours from RAL, NCS, and British Standard
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG HydroPrime 2K Epoxy | ||||||
Coverage: | 16.0 square metres per litre @ 25 microns dft mixed | |||||
Flash Point: | 100°C | |||||
VOC: | 0.1kgs/ltr | |||||
Temperature Resistance: | 100°C | |||||
Viscosity: | 20 ~ 24 seconds B4 cup | |||||
Storage: | Store between 5°C 25°C. When not in use, cans must be kept sealed | |||||
Shelf Life: | 12 months from delivery date in original sealed containers |
Film Thickness Range and Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Application | 60 microns | 100 microns |
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness. These values are a guide only and are not to be used as specification
- Film thickness will vary depending on actual use and specification. Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 2 hours |
Hard Dry: | 24 hours |
Force Dry: | 30 - 45 minues at 70°C |
Recoat/Overcoating: | Minimum 1 hour @ 20°C |
Application
Application Data | ||||||
---|---|---|---|---|---|---|
Compliant Spray Gun | Pressure Pot | Airless/Air-Assisted | ||||
Mixing Ratio: | Base: 3 | Base: 3 | Base: 3 | |||
Hardener: 1 | Hardener: 1 | Hardener: 1 | ||||
Thinner: 1 | Thinner: 1 | Thinner: 1 | ||||
Hardener Options: | Hardener 9094 | Hardener 9094 | Hardener 9094 | |||
Thinner Options: | Thinner 2720 | Thinner 2720 | Thinner 2720 | |||
Spray Gun Setup: | 1.82.0 Fluid Tip | 1.11.4 Fluid Tip | 1315 thou 40/50° | |||
Number of Coats (Guide Only): | 1-2 full coats | 1-2 full coats | 1-2 full coats | |||
Flash Off: | 10-15 mins between coats | 10-15 mins between coats | 10-15 mins between coats |
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
- Read and follow the safety data sheet,product data sheet and label instructions
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour and sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG HydroPrime 2K Epoxy | ||||||
Form: | Liquid | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | 8 | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 100°C | |||||
Flash Point: | >100°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not self-igniting. | |||||
Explosive properties: | Product does not present an explosion hazard | |||||
Explosion limits: Lower: | Not determined | |||||
Explosion limits: Upper: | Not determined | |||||
Vapour pressure at 20°C: | 23 hPa | |||||
Density at 20°C: | 1.712 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | Fully miscible | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 4100 mPas | |||||
Viscosity: Kinematic: | Not determined. | |||||
Solvent content: | Organic solvents: 0.7% | |||||
Water: 26.7% | ||||||
Solids content: | 68.8% |
Health and Safety
Please refer to the product data sheet and safety data sheet in the attachments section.
Data sheet
- Manufacturer
- HMG
- Water / Solvent Based
- Water
- Application Method
- Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Mixing Ratio
- Base: 3, Hardener: 1, Thinner: 1
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- Minimum 1 hour
- Coverage
- 16.0 square metres per litre @ 25 microns dft mixed
- Recommended Thinner/Cleaner
- HMG Thinner 2720
- Solids by Volume
- 68.8%
- Heat Resistance (up-to)
- 100°C
- VOC
- 0.1kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Recommended Dry Film Thickness
- 60 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- N/A
- Viscosity
- 20 ~ 24 seconds B4 cup
- Hard Dry
- 24 hours at 20°C
- Base Type
- Water-Based
- Base Type
- Epoxy
- Finish
- Matt
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Product Range
- HydroPrime
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG HydroPrime 2K Epoxy is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2720
HMG Thinner 2720 is a specially formulated thinner. For use with HMG HydroBase
HMG Hardener 9094
HMG Hardener 9094 is a high solids 2K water based polyamide hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG HydroPrime 2K Epoxy Hardener (Part 2) HMG Hardener 9094 For use with HMG HydroPrime 2K Epoxy...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...