- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Hardener 9094 is a high solids 2K water based polyamide hardener.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG HydroPrime 2K Epoxy | ||||
Hardener (Part 2) | HMG Hardener 9094 |
- For use with HMG HydroPrime 2K Epoxy
- Part 2 of a pack
HMG Hardener 9094 is a high solids 2K water based polyamide hardener.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG HydroPrime 2K Epoxy
Quick Links - Click To Jump To Section:
Features & Benefits
- For use with HMG HydroPrime 2K Epoxy
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9094 | ||||||
Flash Point: | > 200°C | |||||
VOC: | 0.000kgs/ltr | |||||
Temperature Resistance: | 100°C | |||||
Volume Solids: | 67.5 % | |||||
Storage: | Store between 5°C 25°C. When not in use, cans must be kept sealed | |||||
Shelf Life: | 12 months from delivery date in original sealed containers |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
- Read and follow the safety data sheet,product data sheet and label instructions
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour and sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9094 | ||||||
Form: | Liquid | |||||
Colour: | White | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 100°C | |||||
Flash Point: | >200°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not self-igniting. | |||||
Explosive properties: | Product does not present an explosion hazard | |||||
Explosion limits: Lower: | Not determined | |||||
Explosion limits: Upper: | Not determined | |||||
Vapour pressure at 20°C: | 23 hPa | |||||
Density at 20°C: | 1.1 g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | Fully miscible | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | 110 mPas | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: | Water: 32.5% | |||||
Solids content: | 67.5% |
Health and Safety
Please refer to the product data sheet and safety data sheet in the attachments section.
Data sheet
- Manufacturer
- HMG
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Density
- 1.1 g/cm³
- Solids by Volume
- 67.5%
- VOC
- 0 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- UN Number
- UN3082
- Base Type
- Polyamide
- Product Usage Type
- Hardener
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Hardener 9094 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT