- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Bonda FEW Fine Surface Filler is a two-component, polyester, very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing.
- Primarily used for surfacing work on other fillers
- Normally requires no primer before topcoat application
- Takes all types of paint
- Highly popular in the marine industry
Bonda FEW Fine Surface Filler is a two-component, polyester, very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing. The final colour being slightly tinted white. The dense finish generally requires no priming prior to topcoat application making a great choice for final imperfections.
Quick Links - Click To Jump To Section:
Features & Benefits
- Primarily used for surfacing work on other fillers
- Normally requires no primer before topcoat application
- Takes all types of paint
- Highly popular in the marine industry
Product Specifications
Technical Data | |
---|---|
Bonda FEW Fine Surface Filler | |
Coats | Non-applicable |
Curing Time | 30 mins – 1 hr depending on temperature and humidity |
Re-coating Time | Once fully cured and after sanding back, most paints can be applied |
Application Temp | Ideally 15-25°C, but do not use below 10°C |
Coverage | Non-applicable |
Maintenance | Not applicable |
Compatibility | Compatible under all Rustins/Bonda finishes |
Settlement | Not applicable |
Shelf Life | 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C |
Application
- Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio
- Mix thoroughly until an even colour is obtained
- Do not prepare more than is required as any excess will be unusable after 10 mins
Health and Safety
- Harmful by inhalation
- Contains Styrene
- Do not breathe vapours
- Wear suitable protective gloves and eye/face protection
- All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard
- Further details can be found in the product data sheet and safety data sheet
Data sheet
- Manufacturer
- Bonda
- For Use By
- Consumer Use
- For Use On
- Metal, GRP, Plywood
- Single, Two or Three Pack
- Single
- Coverage
- N/A
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 15°C
- Density
- 1.60
- Shelf Life (from date of manufacture)
- 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C
- UN Number
- UN3269
- Fully Cured
- 30 mins – 1 hr depending on temperature and humidity
- Base Type
- Polyester
- Suitable For Use On
- Metal
- Suitable For Use On
- Fibreglass
- Suitable For Use On
- Plywood
- Product Usage Type
- Filler
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bonda FEW Fine Surface Filler is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT