- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Bonda V11 Glassfibre is a rapid hardening resilient filler with high glass fibre content providing great strength to repairs. For repairing rust holes and gaps in metal and is an excellent reinforced filler for fibreglass repairs.
- High glass fibre content
- Provides great strength to repairs
- For repairing rust holes and gaps in metal
- Excellent reinforced filler for fibreglass repairs
- Pack includes hardener and plastic spreader card
Bonda V11 Glassfibre is a rapid hardening resilient filler with high glass fibre content providing great strength to repairs. For repairing rust holes and gaps in metal and is an excellent reinforced filler for fibreglass repairs.
Quick Links - Click To Jump To Section:
Features & Benefits
- High glass fibre content
- Provides great strength to repairs
- For repairing rust holes and gaps in metal
- Excellent reinforced filler for fibreglass repairs
- Pack includes hardener and plastic spreader card
Product Specifications
Technical Data | |
---|---|
Bonda V11 Glassfibre | |
Coats | Not applicable |
Curing Time | 30 mins – 1 hr depending on temperature and humidity |
Re-coating Time | Once fully cured and after sanding back, most paints can be applied |
Application Temp | Ideally 15-25°C, but do not use below 10°C |
Coverage | Not applicable |
Maintenance | Not applicable |
Compatibility | Compatible under all Rustins/Bonda finishes |
Settlement | Not applicable |
Shelf Life | 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C |
Application
- Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio
- Mix thoroughly until an even colour is obtained
- Do not prepare more than is required as any excess will be unusable after 10 mins
Health and Safety
- Harmful by inhalation
- Contains Styrene
- Do not breathe vapours
- Wear suitable protective gloves and eye/face protection
- All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard
- Further details can be found in the product data sheet and safety data sheet
Data sheet
- Manufacturer
- Bonda
- For Use On
- Metal, Fibreglass
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 400G, 1KG, 2.5KG
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 15°C
- Density
- 1.60
- Shelf Life (from date of manufacture)
- 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C
- UN Number
- UN3265
- Fully Cured
- 30 mins – 1 hr depending on temperature and humidity
- Base Type
- Polyester
- Suitable For Use On
- Metal
- Suitable For Use On
- Fibreglass
- Product Usage Type
- Filler
Questions
Question about the product
john on 2024-10-04 19:47:34 | Question:
Is this product waterproof when cured ? |
Answer from Rawlins’ Technical Team:
No, this product would be more classified as water-resistant once hardened, as opposed to waterproof. A filled surface would normally be painted afterwards. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bonda V11 Glassfibre is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT