Dear Sirs, Can this product be spray applied with an air cylinder compressor to external limestone walls. ? I have spray applied Thompsons waterproofing solution and other similar products and used G4 pond sealers previously Thank you kindly Regards Mark T 07801 236174

Assuming the substrate is clean, dry, sound and prepared in accordance with the technical datasheet, this product is suitable. We'd recommend thinning with Bonda G4 Thinners , this allows spray viscosity, however the degree of thinning depends on the equipment used and the operator. Due to thinning, it will be necessary to apply additional coats of Bonda G4 Damp Seal. We'd also recommend suitable respiratory protection such as an air-fed mask and PPE for the applicator.

Is this product suitable to seal an indoor exposed cob wall that I can then paint with a matt/silk emulsion paint.

While this product once fully dried can be sanded, washed down and painted, it has not be tested for this application to cob. We would recommend to test on a small area for compatibility and adhesion prior to full application.

Can i use this to seal interior plaster wall before painting with matt emulsion interior paint?

Assuming you are wanting to seal an area of existing, aged plaster due to an isolated and rectified damp issue, we would suggest something like Coo-Var Anti-Damp Paint would be more suited to this type of application. However, if you just have new/bare plaster that you do not have any dampe issues with and simply wish to prime/seal before painting or papering then Zinsser Drywall Pro 2 in 1 would be the more suitable option.

Can I plaster onto g4 damp proofing sealant?

It is possible to plaster surfaces that have been treated with Bonda G4 Damp Seal.

Bonda G4 Damp Seal

Reference BON12100

Brand Bonda

Search ID BON5093

Moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp-proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins.

Hard wearing.
Non-porous.
Quick and easy to apply.
Can be used at high and low temperatures.

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Size

£16.45(incl. VAT)

£13.71(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

4 questions about the product

Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Bonda G4 Damp Seal is a moisture curing single part polyurethane varnish ideal for sealing damp porous surfaces prior to using release agent. Used as damp-proof floor sealing, pond sealing, sealing concrete prior to GRP sheathing where alkali in concrete can react with resins.

Also an ideal coating for plug surfacing before taking mould as release agents and resins do not attack G4.

Used to improve the bond of GRP to metal. Withstands temperatures up to 200ºC with good chemical resistance.

Quick Links - Click To Jump To Section:

Features & Benefits
Product Specifications
Application
Health and Safety

Features & Benefits

Hard wearing
Non-porous
Quick and easy to apply
Can be used at high and low temperatures

Product Specifications

Technical Data
	Bonda G4 Damp Seal
Coats	For most sealing purposes 3 coats are recommended
Drying Time	60-90 minutes
Re-coating Time	Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats
Application Temperature	G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C. Withstands temperatures up to 200ºC with good chemical resistance
Coverage	500g/sq.m
Maintenance	Not applicable
Compatibility	Compatible with G4 Thinners
Settlement	Shake well before use
Shelf Life	Many years if suitably stored unopened in original container. NOTE; this is a moisture hardened product so storage life of opened tins is limited

Application

G4 should be applied onto a bare, clean, and dry substrate
Existing coatings, paint or other treatments should be removed
Any loose pointing in brick work should be replaced or worn areas in floors repaired

Health and Safety

Flammable
Irritant
Avoid contact with eyes and skin
Wear protective gloves and eye protection
In case of contact with eyes, immediately rinse with plenty of water and seek medical attention
After contact with skin, wash immediately with soap and water or a suitable skin cleanser
Keep out of reach of children
Avoid ignition sources
Do not spray
Do not inhale vapour
Further information can be found in the product data sheet and safety data sheet

Product Details

Reference 5093-862324

Data sheet

Manufacturer: Bonda
For Use By: Consumer Use
Interior / Exterior Use: Interior & Exterior
For Use On: GRP, Metal, Concrete
Single, Two or Three Pack: Single
Pack Size: 500gm, 1kg, 2.5 kg, 5 kg, 25 kg
Coverage: 500g/sq.m
Min. Application Temperature: G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C. Withstands temperatures up to 200ºC with good chemical resistance
Heat Resistance (up-to): 200°C
Shelf Life (from date of manufacture): Many years if suitably stored unopened in original container
UN Number: UN1263
Drying time: 60-90 minutes
Suitable For Use On: Concrete
Suitable For Use On: Brick
Suitable For Use On: Plaster
Suitable For Use On: GRP Glass-Reinforced Plastic
Suitable For Use On: Floors
Suitable For Use On: Ponds
Application Method: Brush
Application Method: Roller
Components: 1K
Product Usage Type: Sealer
Product Range: G4
Colour Family: Clear
Product Type: Polyurethane

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Mark Petersen on 2023-10-19 19:32:36	Question: Dear Sirs, Can this product be spray applied with an air cylinder compressor to external limestone walls. ? I have spray applied Thompsons waterproofing solution and other similar products and used G4 pond sealers previously Thank you kindly Regards Mark T 07801 236174
	Answer from Rawlins’ Technical Team: Assuming the substrate is clean, dry, sound and prepared in accordance with the technical datasheet, this product is suitable. We'd recommend thinning with Bonda G4 Thinners, this allows spray viscosity, however the degree of thinning depends on the equipment used and the operator. Due to thinning, it will be necessary to apply additional coats of Bonda G4 Damp Seal. We'd also recommend suitable respiratory protection such as an air-fed mask and PPE for the applicator.

peggy morris on 2023-03-09 12:27:29	Question: Is this product suitable to seal an indoor exposed cob wall that I can then paint with a matt/silk emulsion paint.
	Answer from Rawlins’ Technical Team: While this product once fully dried can be sanded, washed down and painted, it has not be tested for this application to cob. We would recommend to test on a small area for compatibility and adhesion prior to full application.

Matthew on 2022-04-13 22:55:23	Question: Can i use this to seal interior plaster wall before painting with matt emulsion interior paint?
	Answer from Rawlins’ Technical Team: Assuming you are wanting to seal an area of existing, aged plaster due to an isolated and rectified damp issue, we would suggest something like Coo-Var Anti-Damp Paint would be more suited to this type of application. However, if you just have new/bare plaster that you do not have any dampe issues with and simply wish to prime/seal before painting or papering then Zinsser Drywall Pro 2 in 1 would be the more suitable option.

Ronnie Durkan on 2021-08-30 14:18:35	Question: Can I plaster onto g4 damp proofing sealant?
	Answer from Rawlins’ Technical Team: It is possible to plaster surfaces that have been treated with Bonda G4 Damp Seal.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Bonda G4 Damp Seal is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Follow us on:

Bonda G4 Damp Seal

Bonda G4 Damp Seal

Quick Links - Click To Jump To Section:

Features & Benefits

Product Specifications

Application

Health and Safety

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION