Designed to beautify and protect interior surfaces while preventing mould and mildew growth on the paint film. This versatile product is ideal for use in areas where moisture and humidity are common concerns, such as bathrooms, kitchens, and basements.
Key Features
Mould & Mildew-Proof: Guarantees protection against mould and mildew growth for up to 5 years.
Antimicrobial Properties: Inhibits the growth of odour-causing microbes on the paint film.
Self-Priming: Bonds well to glossy and hard-to-paint surfaces without prior sanding.
Durability: Offers a tough, washable, and moisture-resistant finish that withstands frequent cleaning.
Huge Colour Range: 4,400+ matt and satin colours from RAL, British Standard, and NCS..
Low Odour & Fast Drying: Quick drying time allows for recoating in just 2 hours.
Application Areas
Zinsser Perma-White Interior is suitable for a wide range of interior surfaces, including:
Interior walls and ceilings.
Trim and doors.
Bathrooms and kitchens.
Basements and laundry rooms.
Closets, locker rooms, and hot tub rooms.
Enclosed porches and pool areas.
Commercial and institutional settings such as schools, hospitals, and hotels.
Application Instructions
For optimal performance, follow these application guidelines:
Ensure surfaces are clean, sound, and free of dirt, grease, and loose paint.
Apply two coats of Zinsser Perma-White Interior for complete coverage and protection.
Use a synthetic bristle brush, roller, or sprayer for application.
Allow the first coat to dry for 2 hours before applying the second coat.
For best results, avoid applying in temperatures below 10°C or above 32°C.
Safety Information
When using Zinsser Perma-White Interior, consider the following safety precautions:
Wear protective gloves and eye protection during application.
Ensure adequate ventilation in the application area.
Dispose of unused product and containers according to local regulations.
Keep out of reach of children.
Health & Safety
Zinsser Perma-White Interior Matt is classified as a mixture with the following considerations:
Safety Information: May cause an allergic skin reaction; harmful to aquatic life with long-lasting effects.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can Zinsser perma white paint be painted on walls which already have painted lining paper on?
Answer from Rawlins’ Technical Team:
Assuming the surface is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied directly over previously prepared painted surfaces.
We'd recommend 2 full coats to achieve the desired finish.
R
on
2023-06-25 16:37:26
Question:
Hello, can this be painted ontop of wooden shelves that have already had paint applied to them? thanks
Answer from Rawlins’ Technical Team:
Yes assuming the previously painted areas are clean, dry, sound and lightly sanded to provide a key.
We would recommend to test on a small area for compatibility and adhesion prior to full application.
Kerrie
on
2022-04-21 18:20:14
Question:
Would you recommend Zinsser Perma-white for painting sheet vinyl flooring? Or would there be a better suited paint for this? I’m looking for a tintable paint for this job. Thanks
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior would definitely not be OK for this type of application and unfortunately we have nothing tintable that we could recommend that would be.
Sam
on
2022-03-23 15:38:53
Question:
I'm looking to use Zinsser Perma-White Interior in my downstairs shower room which is poorly ventilated and prone to mould on the walls. I would prefer the matt finish but will the satin finish provide better coverage for this room?
Answer from Rawlins’ Technical Team:
The matt finish does provide a long lasting protection against mildew and mould, but the satin finish will stand up better to areas exposed to wear and tear, it also has better moisture resistant properties.
But please note none of the finish options are suitable for areas exposed to direct water contact.
Natalie
on
2021-11-20 20:19:53
Question:
When using Zinserr Bin on kitchen cupboards should it be applied with brush or roller for best results?
Answer from Rawlins’ Technical Team:
Zinsser B-I-N can be applied with brush roller or spray.
Spray or roller application will give the smoothest finish.
Jeet
on
2021-05-22 11:51:49
Question:
Hi - would this be suitable to go over primed timber walls for a pool cabin?
Answer from Rawlins’ Technical Team:
Assuming the primed walls are not subject to direct water contact, they are clean, dry, sound and prepared as detailed in the technical data sheet this can be used.
We would recommend testing for compatibility and adhesion with the previously applied primer.
Rhiannon
on
2021-05-10 17:58:12
Question:
I'm looking for a fully waterproof paint to paint timber stairs (treads are covered in vinyl flooring but skirting is exposed) that lead up to the pool. They will be constantly wet with chlorinated water and in a humid environment. What would you recomend? Thanks
This is available in many RAL and BS colours in a gloss finish.
Kim
on
2021-04-27 17:16:06
Question:
Hello, my bathroom ceiling is peeling slightly only in small areas, and I intended to use the ‘peel stop’ and over paint with the permseal white paint. I have no mound whatsoever, just a bit of peeling due to the use of the shower. However I donot want a shiny surface so was going to use the MATT paint. I see upon reading one of your FAQ that you. Suggest using SATIN..? Is the Matt suitable in a bathroom? I shall use on the ceiling and the walls.. I appreciate your help.. Kind regards Kim
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior in both Matt and Satin finishes are suitable for use in areas that may be exposed to moisture such as bathrooms and kitchens. We wouldn't recommend Zinsser Perma-White Interior for use on any walls that would come in to direct contact with water streams for a shower for instance.
Andy
on
2021-01-19 15:38:50
Question:
Hi, looking for a product to use on previously painted kitchen cupboard doors and drawer fronts. Unsure if the Allcoat multi-surface solvent based or PermaWhite is the best one to choose? Thanks
Answer from Rawlins’ Technical Team:
Assuming the previously painted doors are clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend Zinsser Perma-White Interior.
As the doors are previously painted we would advise testing for compatibility and adhesion prior to full application.
Louise
on
2021-01-13 11:32:58
Question:
Is this suitable for painting on an interior brick wall?
Answer from Rawlins’ Technical Team:
Assuming the wall is clean dry, sound and prepared as detailed in the Technical Data Sheet this will be suitable for application to a brick wall once it has been primed with Zinsser Bulls Eye 1-2-3.
Jason depledge
on
2020-04-17 09:42:43
Question:
Is this paint ok to use as a top coat on a staircase . As it will gets lots of hands on it over time
Answer from Rawlins’ Technical Team:
Assuming the staircase balustrade to be painted is timber this paint can be used as a top coat.
The satin finish is recommend over the matt for high wear and tear areas due to increased durability.
Lynda
on
2020-04-11 12:27:27
Question:
Hi, Is the Zinsser perma-white interior mould resistant paint pet safe? I need to paint my hall and living room and I have two indoor cats that never go outside.
Answer from Rawlins’ Technical Team:
Unfortunately this is something we couldn't advise on as the manufacturer has not carried out any testing, nor has any data on their products in regards of any kind of animal safety standards.
Ben
on
2019-11-25 09:54:35
Question:
HI does this have the same coverage properties as Zinsser Allcoat (waterbased) Planning on painting some joinery items and have been impressed with the all coat coverage and would like to replicate the coverage for internal joinery. Many thanks
Answer from Rawlins’ Technical Team:
Zinsser AllCoat Exterior (Water Based) products have a coverage rate of 12m² per litre/per coat. Zinsser Perma-White Interior has a coverage rate of 10m² per litre/per coat so slightly less. You can however use the Zinsser AllCoat Exterior (Water Based) products for interior applications if you wish as well as exterior ones.
Mark Young
on
2019-06-17 13:42:18
Question:
Is this product for painting interior UPVC window frames / ledges?
Our decorator used Zinsser Exterior paint to do our hallways and landing! I s this harmful in any way? We did not ask for an exterior paint and have found when it is cleaned it then becomes sticky. What should we do to get rid of this in your opinion? As elderly people we are most concerned and would be grateful of some advice. Thank you, Val Bowie
Answer from Rawlins’ Technical Team:
You haven't mentioned which Zinsser product has been specifically used but assuming it was one of the Zinsser AllCoat Exterior (Water Based) or Zinsser Perma-White Exterior products, both of these are fine for use indoors. We can’t see why it would go sticky when it is wiped, you should only use warm water or a very dilute household detergent for cleaning.
Keith
on
2019-02-12 10:57:46
Question:
Is your perma-White paint suitable for skim coated plasterboard walls of our indoor swimming pool room?
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior is fine for this environment but we do recommend you prime first with Zinsser AllCoat (Solvent-Based). 1 coat if Zinsser AllCoat (Solvent-Based) followed by 2 coats of Zinsser Perma-White Interior would be our specification.
Lisa
on
2019-02-03 18:56:36
Question:
Will Zinsser Perma-White semi-gloss be ok to use on tile around the fireplace?
Answer from Rawlins’ Technical Team:
Zinsser Perma-White is not a heat resistant paint so assuming the tiles in question do not get hot (below 60-70°C) then it should be OK, you may also need a primer such as Zinsser Bulls Eye 1-2-3 for the tiles first to aid adhesion.
EMMA-JANE swan
on
2019-01-14 14:55:28
Question:
HI, Our bathroom is peeling on every surface and we have repainted and its happening again. If we use this paint will it stop it from peeling and how do you prep it, so the old paint doesn't peel underneath? should i choose satin?
Answer from Rawlins’ Technical Team:
This is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process.
Scrape back all the loose failing paint to a firm edge. Treat any areas of mould using a suitable anti mould product such as Zinsser Mould Killer & Remover. Spot prime the edges where the paint has flaked away with 1 coat of Zinsser Peel Stop. Apply 1 full coat of Zinsser Bulls Eye 1-2-3 to the walls and ceiling. If there is a slight step in the coating where the old paint layer meets the bare plaster you can apply a fine surface filler to even this out. Seal the filled areas with a coat of the Peel Stop.
Finally apply 2 coats of Zinsser Perma-White Interior Satin. This is a great product for bathrooms and areas of high humidity. It can also be mixed to a wide range of colours.
NOTE: Minimise the use of the shower, avoid high levels of steam and condensation for the first week after applying the Perma-White, this is to allow it to fully harden and reach full moisture resistance, otherwise the coating may be damaged if it is subjected to condensation and water vapour while it is still curing.
Craig parker
on
2019-01-08 04:27:20
Question:
Will the perma white Interior satin adhere to melamine?
Answer from Rawlins’ Technical Team:
We would advise priming the clean melamine surface with a coat of Zinsser B-I-N first followed by 2 coats of Zinsser Perma-White Interior. This will give much better adhesion.
Cyril hood
on
2019-01-01 14:01:42
Question:
I want paint the brickwork inside a old fire place, to put a wood burner in can i paint the bricks with this paint colour paint ,will it stay on walls with heat of the wood burner
I have some mould on the wall of a bedroom which I am going to clean off. What sort of paint should I use - would prefer a pastel colour rather than white.
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior would be an excellent choice and is available in nearly any colour (not just white), see our blog post How to Paint Over Mould for more details.
Chantelle
on
2018-11-15 08:06:08
Question:
I'm getting this along with the primer to cover some varnished wood panels but could I also use this as normal gloss to do radiators, skirting boards etc?
Answer from Rawlins’ Technical Team:
Yes Zinsser Perma-White Interior can be used on skirting boards and radiators. To prime the radiators Zinsser Bulls Eye 1-2-3 would be recommended. Any rust spots should be sanded back to bright clean metal first then spot primed. The skirting boards can be primed with Zinsser B-I-N first then the Perma-White applied. Please note Perma-White is not available in gloss, only semi-gloss, satin or matt.
Julir
on
2018-10-16 09:46:58
Question:
I have some new kitchen cupboards with a beech coloured melamine coating and would like to paint them white. I have used Zinsser paint before but don't know which to use for this.
Zinsser Perma-White Interior is self-priming and can be applied to a wide range of surfaces without the need of a separate primer or undercoat, however there are a number of substrates/circumstances that do require various primers, please refer to the Product Data Sheet for full details available to download from the 'Download' section beneath the product description on the product page.
Jason
on
2018-06-01 14:06:23
Question:
I require a waterproof paint for a downward sloping ceiling of a shower area which is quite likely to get wet from shower spray. Could you please advise if this paint would be suitable? Many thanks.
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior will be fine for this application. The substrate must be completely dry, remove unsound paint and wash down to remove soap/ shampoo splashes. If there are any bare areas these can be primed with Zinsser Peel Stop then apply 2 coats of Zinsser Perma-White Interior. Restrict use of shower for first 5-7 days to allow the paint to fully cure.
Patricia Singleton
on
2018-03-22 14:42:00
Question:
Could you please advise on two questions I have no.1 which paint should I use to alleviate the problem of the gloss paint going yellow in the bathroom and to cover dark varnished wood doors to white.Thanks for reading Mrs Patricia Singleton.
Answer from Rawlins’ Technical Team:
We would recommend priming with Zinsser B-I-N and finishing with Zinsser Perma-White Interior in your chosen colour and finish for both instances.
Gareth Naylor
on
2018-02-23 00:55:49
Question:
Hi, Is this product suitable for use on a ceramic tiled shower area?
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior is an excellent product for use in humid conditions such as walls and ceiling in a bathroom, kitchen or swimming pool area and when used in conjunction with Zinsser Bulls Eye 1-2-3 Primer it can be used for painting ceramic tiles providing a tough, durable finish; however it is not recommended for use in the shower area itself where the product would come in to direct contact with hot running water and would be subjected to harsh cleaning.
Jenny
on
2017-09-13 12:46:25
Question:
Hi, I want to paint over varnished wooden shelves and pre-painted wooden skirting boards in the bathroom - would the Interior White be suitable for this?
Thanks
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior would be a good product for this environment. We would recommend Zinsser B-I-N to prime the varnish first though, followed by 2 coats of the Perma-White.
Jenny
on
2017-09-13 12:46:25
Question:
Hi, I want to paint over varnished wooden shelves and pre-painted wooden skirting boards in the bathroom - would the Interior White be suitable for this?
Thanks
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior would be a good product for this environment. We would recommend Zinsser B-I-N to prime the varnish first though, followed by 2 coats of the Perma-White.
Doug
on
2017-05-24 14:00:56
Question:
Hi,
we would like to know if your perma white paint would be suitable for swimming pool ceiling
we are taping and jointing so would be applied to a gtec moisture resistant plasterboard would we need to wash coat or seal prior to the application of the perma white
Thanks Doug
Answer from Rawlins’ Technical Team:
The specification for swimming pool walls and ceilings Zinsser recommend is to prime first with Zinsser AllCoat (Solvent-Based), followed by 2 coats of Zinsser Perma-White Interior. No other sealers required, do not thin either product.
Tanya
on
2017-05-02 11:23:30
Question:
ZN7070001D1
Zinsser Perma-white Interior paint
Am I correct in assuming from your website that despite the name the Zinsser Perma-white Interior paint comes in a range of colours? Are you able to supply a paint swatch book of the colours? Can you also order paint sample pots? Also can you paint on top of this product with a regular paint and still retain the anti-mould properties?
Answer from Rawlins’ Technical Team:
Yes Zinsser Perma-White Interior is available in the range of colours shown on the product page. However we do not offer colour cards or samples due to the colours on offer being industry standard RAL and BS colours (which means they are not unique to the Zinsser Perma-White product). Finally Zinsser Perma-White Interior must be the final finish and cannot be painted over if you wish to maintain its performance properties.
Simon
on
2016-11-30 20:37:00
Question:
I need to paint a newly plastered bathroom ceiling. I'm unsure if l should do a couple of miscoats with this product or if a standard Matt emulsion would be suitable.
May l ask your thoughts?
Thank you.
Answer from Rawlins’ Technical Team:
Prime the bare plaster with Zinsser Gardz and finish with 2 coats of Zinsser Perma-White Interior.
Carole
on
2016-09-17 12:14:31
Question:
Do you have samples for this paint?
Thanks
Answer from Rawlins’ Technical Team:
I'm afraid samples aren't available for this product.
Joe
on
2016-08-31 10:21:00
Question:
i have issues with mould on ceilings in two bedrooms and bathroom. How do I prep the ceilings before using this paint please?
Answer from Rawlins’ Technical Team:
Surface Preparation All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or brushing with a stiff bristle brush to a sound edge. Feather sound edges with a fine grade abrasive paper. Remove all visible signs of organic growth and treat the areas with Zinsser Mould Killer & Remover in accordance with the manufacturer’s instructions. Allow to dry.
In areas with remaining sound paint wash with hot water and liquid detergent solution to remove any contaminants, frequently changing the water. Rinse thoroughly with clean water to remove all residues. Allow to dry.
Patch Priming Patch prime all stained, bare and filled areas with one coat of Zinsser B-I-N Primer Sealer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 45 minutes in normal drying conditions.
Decoration Decorate with two full coats of Zinsser Perma-White Interior Matt, Satin or Semi-Gloss in accordance with the manufacturer’s instructions. Allow a minimum drying time of two hours between coats.
Zinsser Perma-White is a durable, water-based, very low odour finish containing a biocode that protects the dried coating against mould and mildew and is guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
Dave
on
2016-03-01 16:27:43
Question:
Would this be suitable at protecting wooden structures from mould and fungus in a cellar where we have previously had damp issues?
Answer from Rawlins’ Technical Team:
Yes, Zinsser Perma-White Interior would protect wood from mould and fungus.
If the timber is structural then it should be replaced if there is fungus growing, if it is just shelving or other then proceed as follows to give a good level of protection.
If the timber is not to be replaced with new and assuming there is no paint on already, scrape to remove the mould and fungus, treat with Blackfriar Anti-Mould Solution and leave overnight. Scrub with hot soapy water then apply a further treatment of the Blackfriar Anti-Mould Solution. Don’t wash this second treatment off, apply Blackfriar Exterior Wood Preservative Gold Star Clear liberally to the dry bare timber, 3 coats wet on wet ideally, leave 3-4 days to dry then apply Zinsser Cover Stain and Zinsser Perma-White Interior as above.
Gary Horton
on
2016-01-14 16:36:23
Question:
We are looking to use the Zinsser Perma-White Interior for our indoor swimming pool hall - could you let me know (i) that it would be suitable; and (ii) how soon can it be painted onto fresh skimmed plaster?
Answer from Rawlins’ Technical Team:
Zinsser Perma-White Interior is definitely a suitable product for this application and what we would usually specify for these instances. The plaster will need to be primed with Zinsser AllCoat (Solvent-Based) before applying Zinsser Perma-White Interior but you must ensure the plaster is sufficiently dry before doing so. Substrates to be coated with this system should have a maximum moisture content of 12%.
Bruce Ross
on
2015-07-31 10:55:27
Question:
I am painting over existing (new) white emulsion in an outdoor "garden room". How many coats of Zinsser Perma-White Interior do I need?
Answer from Rawlins’ Technical Team:
2 coats @ 10m² per litre/per coat are required for proper performance and mould and mildew-resistance.
Zinsser Perma-White Interior is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Elizabeth
on
2024-10-28 14:19:42
