- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A 1K polyurethane, clear, transparent floor sealer based on modified vegetable oil for concrete floors, wood floors, cement floors, porous tiles, garages and kitchens.
- Dries to a gloss after more than two to three layers have been applied.
- Enhances appearance and protects against wear.
- Prevents the dispersion of dust from untreated concrete floors.
- After treatment floors are easy to keep clean as dirt or grease can no longer penetrate.
- Touch-dry: after approximately 7 hours.
- Paintable: after approximately 12 hours.
- Cured: after approximately 24 hours.
Lacq Floor Varnish X10 is a 1K polyurethane, clear, transparent sealer based on modified vegetable oil that dries to a gloss after more than two to three layers have been applied.
Lacq Floor Varnish X10 seals concrete floors with a transparent layer, preventing the dusting caused by the wear and tear of untreated concrete floors. Protects and extends the life of your concrete floor.
The transparent layer stops liquid and dirt being absorbed so that your floor is less susceptible to marking. Suitable for concrete floors, wood floors, cement floors, porous tiles, garages and kitchens.
Concrete floors are easy to keep clean after curing with a vacuum cleaner and mop.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Data
- Substrate Requirements
- Coverage
- Application
- Drying Times
- Thinner
- Shelf Life
- Health & Safety
Features & Benefits
- 1K polyurethane, clear, transparent sealer based on modified vegetable oil
- Dries to a gloss after more than two to three layers have been applied
- Seals concrete floors with a transparent layer, preventing the dusting caused by the wear and tear of untreated concrete floors
- Suitable for concrete floors, wood floors, cement floors, porous tiles, garages and kitchens
- Enhances appearance and protects against wear
- Touch-dry: after approximately 7 hours
- Paintable: after approximately 12 hours
- Cured: after approximately 24 hours
- One pack product
Product Data
Technical Data | |
---|---|
Lacq Floor Varnish X10 | |
Specific gravity, kg/m³, 25 °C | 890 g/l |
VOC (Volatile Organic Compound) | 454 g/l |
Solid matter % | 48% |
Volatile constituents | Low aromatic White Spirit |
The above-mentioned values are indicative.
Substrate Requirements
Application Conditions:
- Concrete or cement moisture content: maximum 4%
- Wood moisture content: maximum 18%
- Application temperature: at least 5°C
Surface Preparation:
- Concrete and cement floors should be at least six weeks old before starting the treatment
- The moisture content of concrete and cement flooring can be tested by taping down plastic film onto several 1m² sections to create an airtight seal. The plastic film and the floor should still be dry after 48 hours
- If this is the case, the floor can be treated. Substrate moisture may negatively affect coating adhesion
- If the floor has been finished with a curing compound, this should always be sand blasted prior to treatment
- The surface must be clean, dry, smooth and structurally sound
- Remove dirt, dust and wax by cleaning with water and a suitable cleaning agent, according to the instructions
- Concrete and cement floors that have already been treated with Floor Varnish X10 should be cleaned with water and the appropriate cleaning agent. Then sand the floor thoroughly
- Now, rinse the floor with clean water, remove the residue with a water vacuum cleaner and leave to dry
- Very smooth concrete and cement floors should be etched first, according to the instructions
- Smooth concrete floors should preferably be dust-free blasted or polished with diamond surface grinders
- Smooth (sand) cement flooring must be sanded
- After sanding, use an appropriate vacuum cleaner to remove all sanding dust
Coverage
Wood:
- Approximately 13m2 per litre
Concrete and Cement:
- Approximately 10m2 per litre
Note: This coverage is indicative. Results are highly dependent on the absorbency of the substrate.
Application
Application Methods:
- Brush
- Roller
- Soft-bristle broom
- Airless Spray:
- Nozzle 0.013”
- Spraying angle 60°-80°
- Nozzle pressure 150–180 bar
Concrete and Cement Floors:
- Dilute the first layer of Floor Varnish X10 with 20-40% white spirit, depending on the absorbency of the concrete
- Dilute the second and, possibly, third layer with approximately 10% white spirit
- For extremely smooth and non-porous concrete surfaces like stelcon slabs, dilute with 60% white spirit
- The layer thickness is built up sufficiently as soon as the Floor Varnish X10 produces a smooth gloss, after which another 1 or 2 layers can be applied as desired (avoid applying layers too thickly)
Wooden Floors:
- Depending on the hardness of the floor, dilute the first layer of Floor Varnish X10 with 20-50% white spirit
- Dilute the second and, possibly, third layer with approximately 10% white spirit
- As soon as the Floor Varnish X10 produces an even gloss, the build-up of the layer is sufficient and another 1 to 2 layers can be applied, as desired (avoid applying layers too thickly)
Porous Tiles:
- Apply Floor Varnish X10 in two to three layers, diluting them with 60%, 40% and 20% white spirit, respectively
- The harder the tile, the higher the dilution percentage
- As soon as the Floor Varnish X10 produces an even gloss, the build-up of the layer is sufficient and another 1 to 2 layers can be applied, as desired (avoid applying layers too thickly)
Drying Times
Drying Times at 23°C/50% RH | |
---|---|
Touch-dry, after | Approx. 7 hours |
Paintable, after | Approx.12 hours |
Cured, after | Approx. 24 hours |
Thinner
- White spirit
Shelf Life
- 24 months if stored between 5 and 35°C in the original sealed packaging
Health & Safety
- Please refer to the safety data sheet
- Should be handled in accordance with the industrial ‘Good Practice’
- Keep out of the reach of children
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Lacq
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete, Wood, Tiles
- Application Method
- Brush, Roller, Broom, Airless Spray
- Sheen
- Gloss
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5L
- Coverage
- Wood: Approximately 13m² per litre, Concrete and Cement: Approximately 10m² per litre
- Recommended Thinner/Cleaner
- White Spirit
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 24 months if stored between 5 and 35°C in the original sealed packaging
- Dry to Recoat (at 23°C)
- Approx.12 hours
- Touch Dry (at 23°C)
- Approx. 7 hours
- Fully Cured (at 23°C)
- Approx. 24 hours
- Specific Gravity
- 890 g/l
- Base Type
- Solvent-Based
- Suitable For Use On
- Tile
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Broom
- Components
- 1K
- Product Usage Type
- Sealer
- Product Usage Type
- Varnish
- Colour Family
- Clear
- Product Type
- Polyurethane
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Lacq Floor Varnish X10 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT