- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Air dried one-part filler.
- For hard or softwood.
- Solvent free.
- Filler for small holes and splits.
- Rapid drying.
- Easy to sand.
- For interior and exterior use.
Bonda Wood Stop - Wood and Grain Filler is an air dried one-part filler for small holes, splits and damaged areas of wood. Ideal for filling surface imperfections and damaged wood grain. Can also be varnished or painted. Easy to sand and leaves a smooth dense surface.
Quick Links - Click To Jump To Section:
Features & Benefits
- For hard or softwood
- Solvent free
- Filler for small holes and splits
- Rapid drying
- Can be varnished and painted
- Easy to sand
- For interior and exterior use
Product Specifications
Technical Data | |
---|---|
Bonda Wood Stop - Wood and Grain Filler | |
Coats | Not applicable |
Curing Time | 2 hours depending on the temperature and humidity. Do not use below 10°C or in high humidity |
Re-coating Time | Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer |
Application Temperature | Ideally 15-25°C, but do not use below 10°C |
Coverage | Not Applicable |
Maintenance | Not applicable |
Compatibility | Can be used under all Rustins paints and varnishes. Most other brands should be compatible but if in doubt carry out a small test. Always test first on an inconspicuous area to check that the colour is correct. The Wood Filler may accept dyes and stains differently to the surrounding wood |
Settlement | Stir well if there is any sign of separation |
Shelf Life | A very long time if stored in original sealed container in a cool dry place. Do not store below 5°C |
Application
- Apply using a putty knife, forcing into the cracks and holes
- Leave slightly proud of the surface to allow for possible shrinkage and to enable sanding
- Allow to dry for 2 hours under good conditions
- Never exceed layers of 3 mm when applying or shorten the drying time
- If it is cold or damp it may require longer to dry
- If the hole to be filled is deep, it should be filled in layers of 3 mm allowing each to dry before further layers are applied
- Clean all equipment immediately after use with warm water
Health and Safety
- Keep out of reach of children
- Wash hands after use
- Further information can be found in the product data sheet and safety data sheet
Data sheet
- Manufacturer
- Bonda
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood, Soft Wood, Hard Wood
- Application Method
- Putty Knife
- Single, Two or Three Pack
- Single
- Pack Size
- 250ml
- Coverage
- Not Applicable
- Min. Application Temperature
- Ideally 15-25°C, but do not use below 10°C
- Shelf Life (from date of manufacture)
- A very long time if stored in original sealed container in a cool dry place. Do not store below 5°C
- UN Number
- N/A
- Drying time
- Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer
- Dry to Recoat
- Leave to dry for 2-3 hours before applying undercoat or varnish. Deep filled area may require longer
- Suitable For Use On
- Wood
- Application Method
- Putty Knife
- Product Usage Type
- Filler
- Colour Family
- White
- Colour Family
- Mahogany
- Colour Family
- Oak
- Colour Family
- Pine
- Colour Family
- Ash
- Colour Family
- Teak
- Colour Family
- Beech
- Colour Family
- Redwood
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bonda Wood Stop - Wood and Grain Filler is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT