- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fluxaf Mould And Mildew Stain Remover is designed to professionally remove tough stains from mould and mildew. It is safe and effective on practically all interior and exterior surfaces.
- Works fast and protects against new stains as it cleans
- Biodegradable
- Suitable for use on bathrooms, shower doors, patios, sheds, sinks, vinyl curtains, wooden surfaces
- Also suitable for boats
- Removes mould and mildew stains in 4 easy steps
- Note: Not recommended for use on varnished surfaces
Fluxaf Mould And Mildew Stain Remover is designed to professionally remove tough stains from mould and mildew. It is safe and effective on practically all interior and exterior surfaces. The Fluxaf formula works fast and protects against new stains as it cleans.
Note: Not recommended for use on varnished surfaces.
Quick Links - Click To Jump To Section:
Features & Benefits
- Designed to professionally remove tough stains from mould and mildew
- Safe and effective on practically all interior and exterior surfaces
- Works fast and protects against new stains as it cleans
- Biodegradable
- Suitable for use on bathrooms, shower doors, patios, sheds, sinks, vinyl curtains, wooden surfaces
- Also suitable for boats
- Removes mould and mildew stains in 4 easy steps
- Note: Not recommended on varnished surfaces
Suitable Uses
Ideal for use on:
- Bathrooms
- Shower doors
- Patios
- Sheds
- Sinks
- Vinyl curtains
- Wooden surfaces
- Boats
- Campers
- Many other surfaces
Directions
Note: Always test the effect of the product on an inconspicuous area first.
Remove mould and mildew stains in 4 easy steps:
- Spray Fluxaf Mould & Mildew Stain Remover on the stained surface until thoroughly wet
- Allow the product to work for 5 minutes
- Wipe and rinse the surface with a wet cloth or sponge
- Tough stains can be removed using a brush
Stains imbedded in old grout, silicone caulking or hard water deposits may not be removed by Fluxaf Mould & Mildew Stain Remover because the product can’t reach the stain properly.
To prevent the forming of mould and mildew stains, spray a mist of the product on the problem area every 1 to 2 months without wiping the surface.
Health & Safety
- Please refer to the safety data sheet
- Causes serious eye irritation
- Wear protective gloves/protective clothing/eye protection/face protection
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- If eye irritation persists: Get medical advice/attention
- Wash hands thoroughly after handling
- Keep out of reach of children
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Fluxaf
- Interior / Exterior Use
- Interior and Exterior
- For Use On
- Wood, Tile, Glass, Metal, Vinyl
- Application Method
- Cloth, Sponge, Brush
- Single, Two or Three Pack
- Single
- Pack Size
- 750ml
- UN Number
- N/A
- Suitable For Use On
- Metal
- Suitable For Use On
- Wood
- Suitable For Use On
- Glass
- Suitable For Use On
- Vinyl
- Suitable For Use On
- Tile
- Application Method
- Brush
- Application Method
- Cloth
- Application Method
- Sponge
- Product Usage Type
- Stain Remover
- Categorised As
- Accessories > Fungicidal Cleaners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fluxaf Mould & Mildew Stain Remover is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT