Fluxaf Power Clean is a powerful ready to use alkaline cleaner and degreaser. Based on a range of solvents and surfactants, it is designed to remove tough stains in seconds from practically all hard surfaces.

Please Note: This product could mark metal, always test on an inconspicuous area first. Do not use on leather. Do not mix the product with any other chemical.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Suitable Uses
• Directions
• Health & Safety

Features & Benefits

• Powerful ready to use alkaline cleaner and degreaser
• Based on a range of solvents and surfactants
• Designed to remove tough stains in seconds from practically all hard surfaces
• Biodegradable
• Suitable for removal of chewing gum, labels, tape residue, smoke damage, printers' ink, mildews stains, scuff marks, food and drink stains and many more
• Can also be used for stubborn stains such as brake dust, oil grease and dried latex: apply a generous amount of cleaner and allow to stand for a few minutes before wiping off
• Acts as a good pre-treatment for painting, paint will adhere to surfaces better and for longer
• Note: This product could mark metal, always test on an inconspicuous area first. Do not use on leather

Suitable Uses

Ideal for use on:

• Chewing gum
• Bumper Stickers
• Labels
• Kitchen cabinets
• Kitchen grease
• Masking tape
• Tape residue
• Fireplace soot
• Smoke damage
• Printers' ink
• Crayon
• Lipstick
• Shoe polish
• Soap Scum
• Mildew Stains
• Scuff marks
• Cosmetics
• Food & drink stains
• Blood stains
• Pet stains

Stubborn Stains:

For older or more difficult jobs like brake dust, oil grease and dried latex: Apply a generous amount of cleaner and allow to stand for a few minutes before wiping off. Repeat the application process if necessary.

Pre-treatment For Painting:

Paint will adhere to surfaces better and longer with Power Clean than with traditional pre-treatments, so you are assured greater reliability.

Directions

Note: Always test the effect of the product on an inconspicuous area first.

• For initial application spray sparingly on surface to be cleaned, working from top to bottom
• Spray surface until thoroughly wet, and allow to penetrate for a few seconds before rinsing with wet cloth or sponge
• If used as treatment before painting, ensure any residue is thoroughly rinsed off with clean water
• For older, more difficult jobs, apply a generous amount of cleaner and allow it to stand for a few minutes before wiping off
• For stubborn stains, repeat the application process

Warning: This product could mark metal, always test on an inconspicuous area first. Do not use on leather. Do not mix the product with any other chemical.

Health & Safety

• Please refer to the safety data sheet
• Wear protective gloves/protective clothing/eye protection/face protection
• Wash hands thoroughly after handling
• Keep out of reach of children

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]