- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Akvi Top DS 25 is a one-component water-borne topcoat for interior timber and furniture.
- Fast-drying topcoat for interior use
- Very hard paint film
- Good filling properties
- Very good scratch and blocking resistance
- Suitable for panels, doors, mouldings, and other wooden/fibre board surfaces
- Low VOC content
Product customisation
Don't forget to save your customization to be able to add to cartTikkurila Akvi Top DS 25 is a one-component water-borne topcoat for interior timber and furniture.
Click To Jump To Section:
- Features and Benefits
- Product Specification
- Drying Times
- Surface Preparation
- Application Methods
- Application Conditions
- Health and Safety
Features and Benefits
- Fast-drying topcoat for interior use
- Very hard paint film
- Good filling properties
- Very good scratch and blocking resistance
- Suitable for panels, doors, mouldings, and other wooden/fibre board surfaces
- Low VOC content
Product Specification
Technical Data | |
---|---|
Tikkurila Akvi Top DS 25 | |
Coverage: |
10–13 m²/l Practical coverage depends on application method, painting conditions and shape and quality of the substrate |
Dry Film Thickness: | 31–38 µm |
Wet Film Thickness: | 100–120 g/m² |
Density (kg/l): | 1.2 to 1.3 g/cm³ |
Volume Solids: | 39±2 % |
Weight Solids: | 52±2 % |
Specific Gravity: | 1.25±0,1 kg/ litre |
VOC: | 26 g/l |
Storage: |
Storage and transport in tightly closed containers in temperature +5°C – +25°C in dry and ventilated areas Protect from frost and direct sunlight |
Drying Times
Curing Times | ||
---|---|---|
+23ºC | +50ºC | |
Dust Dry: | 20–25 min | 5–10 min |
Touch Dry: | 20–25 min | 5–10 min |
Dry to Sand: | 25–30 min | 5–10 min |
- Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation
Surface Preparation
- Wood surfaces should be sanded with sandpaper P150–240
- Primed surfaces should be sanded with sandpaper P240–600
- All sanding dust must be removed
Application Methods
Recommended Primers:
- Akvi Primer Pro, Akvi Primer, Diccoplast Primer and Dicco Surf Primer
Mix Components:
- Stir the paint carefully before use
- Thin with water if necessary
Application:
- For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object
- For air–assisted airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object
- For conventional spraying, the product is thinned approximately 0–5% . Recommended nozzle tip is 1.6–2.2 mm and pressure 2–3 bar
Thinner:
- Water
Tools Cleaning:
- Water
Application Conditions
- Substrate must be clean and dry before painting
- During application and drying air temperature, substrate and paint must be over +18ºC and relative humidity of the air must be below 70%
Health and Safety
- Refer to the product data sheet and safety data sheet in the attachments section above for further details
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Wood
- Application Method
- Spray
- Sheen
- Semi Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 3L, 10L, 20L
- Coverage
- 10–13 m²/l
- Recommended Thinner/Cleaner
- Water
- Compatible Primers
- Akvi Primer Pro, Akvi Primer, Diccoplast Primer and Dicco Surf Primer
- Min. Application Temperature
- +18ºC and relative humidity of the air must be below 70%
- Density
- 1.2 to 1.3 g/cm³
- Solids by Volume
- 39±2%
- VOC
- 26 g/l
- Recommended Dry Film Thickness
- 31–38 µm
- Recommended Wet Film Thickness
- 100–120 g/m²
- UN Number
- N/A
- Touch Dry (at 23°C)
- 20–25 min
- Specific Gravity
- 1.25±0,1 kg/ litre
- Solids by Weight
- 52±2%
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Finish
- Semi-Matt
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Akvi
- Type of Wood Finish
- Wood Paint
- Suitable For
- Walls & Ceilings
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Akvi Top DS 25 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT