- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Bonda APW Soft Wax Mould Release Agent is a soft universal release wax that gives excellent release from a wide range of rigid mould compounds including plaster, Jesmonite, GRP, metal, wood, and glass.
- Made from a blend of soft waxes
- Can also be used to release polyurethane foams and casting materials from moulds that have intricate and porous surfaces
- APW should be applied several times on new moulds, depending on porosity
- Can also be used on production equipment such as scales and casting tables to assist in cleaning
- Can applied with a cloth or sponge
- Please Note: Some porous surfaces such as plaster and timber may need to be sealed before release wax is applied, and trials should be carried out to ensure that the product is suitable
Bonda APW Soft Wax Mould Release Agent is a soft universal release wax that gives excellent release from a wide range of rigid mould compounds including plaster, Jesmonite, GRP, metal, wood, and glass. It can also be used on production equipment such as scales and casting tables to assist in cleaning.
APW is made from a blend of soft waxes used to release polyurethane foams and casting materials from moulds that have intricate and porous surfaces. APW should be applied several times on new moulds, depending on porosity. It is applied with a cloth or sponge.
Please Note: Some porous surfaces such as plaster and timber may need to be sealed before release wax is applied, and trials should be carried out to ensure that the product is suitable.
Quick Links - Click To Jump To Section:
Features & Benefits
- Gives excellent release from a wide range of rigid mould compounds including plaster, Jesmonite, GRP, metal, wood, and glass
- Can also be used on production equipment such as scales and casting tables to assist in cleaning
- Made from a blend of soft waxes
- Can also be used to release polyurethane foams and casting materials from moulds that have intricate and porous surfaces
- APW should be applied several times on new moulds, depending on porosity
- Can applied with a cloth or sponge
- Please Note: Some porous surfaces such as plaster and timber may need to be sealed before release wax is applied, and trials should be carried out to ensure that the product is suitable
Product Specifications
Technical Data | |
---|---|
Bonda APW Soft Wax Mould Release Agent | |
Coats | May be applied several times depending on porosity of mould and if mould is new |
Drying Time | 15 – 60 minutes depending on ambient conditions |
Re-coating Time | 15 – 60 minutes depending on ambient conditions |
Application Temperature | Ideally 15 – 25°C |
Coverage | 50g/sq.m |
Maintenance | Not applicable |
Compatibility | May be used on plaster, GRP, metal, wood and glass. Check product suitability |
Settlement | Stir well before use |
Shelf Life | Several years if suitably stored in unopened containers. Avoid frost. Avoid heat |
Application
- Ensure mould is clean before starting
- Some porous surfaces such as plaster and timber may need sealing before release wax is applied
- Apply with a cloth or sponge
- Wash equipment with white spirit
Health and Safety
- Causes serious eye irritation
- Wear protective gloves/eye protection
- If in eyes:
- Rinse cautiously with water for several minutes
- Remove contact lenses, if present and easy to do
- Continue rinsing
- If eye irritation persists, get medical attention
- Avoid release into the environment
- Collect spillage
- Further information can be found in the product data sheet and safety data sheet
Data sheet
- Manufacturer
- Bonda
- For Use By
- Professional Use
- For Use On
- Plaster, Jesmonite, GRP, Metal, Wood, Glass
- Application Method
- Sponge, Cloth
- Single, Two or Three Pack
- Single
- Pack Size
- 500g
- Coverage
- 50g/m²
- Recommended Thinner/Cleaner
- White Spirit
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 15°C
- Shelf Life (from date of manufacture)
- Several years if suitably stored in unopened containers. Avoid frost. Avoid heat
- UN Number
- UN3077
- Drying time
- 15–60 minutes depending on ambient conditions
- Dry to Recoat
- 15–60 minutes depending on ambient conditions
- Base Type
- Wax
- Suitable For Use On
- GRP
- Suitable For Use On
- Jesmonite
- Suitable For Use On
- Casting Tables
- Suitable For Use On
- Wood
- Suitable For Use On
- Glass
- Suitable For Use On
- Rigid Moulds
- Suitable For Use On
- Scales
- Suitable For Use On
- Metal
- Suitable For Use On
- Plaster
- Application Method
- Sponge
- Application Method
- Cloth
- Product Usage Type
- Release Agent
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bonda APW Soft Wax Mould Release Agent is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT