- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Description
International Inter H2O 699 a two-component waterborne acrylic polyurethane finish.
Suitable for use in new construction systems in a wide variety of environments, including commercial infrastructure, factories, processing industries and oil and gas facilities.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Details
- Drying Times
- Surface Preparation
- Application Conditions
- Applications
- System Compatibility
- Health and Safety
Features & Benefits
- Provides excellent durability
- Long term recoatability
- Compatible with a wide range of International systems
Product Details
| Technial Data | |
|---|---|
| Volume Solids: | 42% ± 3% (depends on colour) |
| Typical Thickness: | 35-45 microns dry equivalent to 83-107 microns wet |
| Theoretical Coverage: | 10.50 m²/litre at 40 microns d.f.t and stated volume solids |
| Practical Coverage: | Allow appropriate loss factors |
| Flash Point: |
Part A 101°C Part B 62°C Mixed 101°C |
| VOC: | 61 g/kg |
| Shelf Life: | 12 months minimum at 25°C |
Drying Times
| Drying Information | ||||
|---|---|---|---|---|
| Overcoating Interval with recommended topcoats | ||||
| Temperature | Touch Dry | Hard Dry | Minimum | Maximum |
| 10°C | 4 hours | 16 hours | 16 hours | Extended¹ |
| 15°C | 4 hours | 8 hours | 8 hours | Extended¹ |
| 25°C | 3.5 hours | 6 hours | 6 hours | Extended¹ |
| 40°C | 2 hours | 3 hours | 3 hours | Extended¹ |
- Overcoating interval can vary markedly with film thickness, humidity and in particular, air flow
Surface Preparation
- All surfaces to be coated should be clean, dry, and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000
Primed Surfaces
- To ensure good aged overcoating of InterH2O 699 by other materials the surface must be clean, dry, and free from contamination, particularly if the surface profile is rough due to the presence of micaceous iron oxide
- InterH2O 699 should always be applied over a recommended anti-corrosive coating scheme
- The primer surface should be dry and free from all contamination and InterH2O 699 must be applied within the overcoating intervals specified (consult the relevant product data sheet)
- Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of InterH2O 699
Application Conditions
- The minimum steel temperature for application must be above 10°C and be at least 3°C above dew point
- The relative humidity should be lower than 80% otherwise drying and overcoating times will be severely extended and films will show an increase likelihood of foaming
- Good airflow is essential around the object being painted - minimum air speed 0.1m/sec (4 inches/sec)
Application
Mixing
Material is supplied in two containers as a unit
Always mix a complete unit in the proportions supplied. Once the unit has been mixed it must be used within the working pot life specified
- Agitate Base (Part A) with a power agitator
- Combine entire contents of Curing Agent (Part B) with Base (Part A) and mix thoroughly with power agitator
- Once mixed do not seal tins - pressure build up may lead to explosion
Mix Ratio
- 4 part(s) : 1 part(s) by volume
| Working Pot Life | |||
|---|---|---|---|
| 10°C | 15°C | 25°C | 40°C |
| 2 hours | 2 hours | 2 hours | 1 hour |
| Application Methods | |||
|---|---|---|---|
| Airless Spray: | Recommended |
Tip Range 0.33-0.45 mm (13-18 thou) Total output fluid pressure at spray tip not less than 155 kg/cm² (2204 p.s.i.) |
|
| Air Spray (Pressure Pot): | Recommended | Gun: DeVilbiss MBC or JGA Air Cap: 704 or 765 Fluid Tip: E | |
| Brush: | Suitable - small areas only | Typically, 30-40 microns (1.2-1.6 mils) can be achieved | |
| Roller: | Suitable - small areas only | Typically, 30-40 microns (1.2-1.6 mils) can be achieved | |
| Thinner: | Not recommended | ||
| Cleaner: | International GTA991 followed by clean potable water | ||
- Do not allow material to remain in hoses, gun or spray equipment
- Thoroughly flush all equipment with International GTA991
- Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units
Clean Up
- Clean all equipment immediately after use with International GTA991
- It is good working practice to periodically flush out spray equipment during the working day
- Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays
- Consult InterH2O 699 Application Guidelines for further details. All surplus material and empty containers should be disposed of in accordance with appropriate regional regulations/legislation
Apply by air or airless spray. Thoroughly flush equipment with International GTA991 thinner, or alcohol, followed by water prior to use. To obtain maximum edge protection and film build, airless or air spray application is recommended. Application by other methods, e.g. brush or roller, may require more than one coat.
Minor areas which are difficult to ventilate should be brush applied to prevent over-application.
Over-application of InterH2O 699 will extend both the minimum overcoating periods and handling times. Over-application will also increase microfoam in the dry film resulting in low gloss.
Systems Compatibility
The following primers/intermediates are recommended for InterH2O 699:
The following topcoats are recommended for InterH2O 699:
- InterH2O 699
- Interseal 121
- Interthane 990
For other suitable primers/intermediates consult Rawlins Technical Team on 0113 2455450 (option 2) or [email protected]
Health and Safety
Please refer to the product data sheet and safety data sheet in the attachents section above
Product Details
5211-863130
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Water
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Touch Dry (at 20°C)
- 3.5 hours
- Coverage
- 10.50 m²/litre
- Recommended Thinner/Cleaner
- Cleaner: International GTA991
- VOC
- 61 g/kg
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Recommended Dry Film Thickness
- 40 microns
- UN Number
- N/A
- Touch Dry (at 10°C)
- 4 hours
- Pot Life
- 10°C: 2 hours, 15°C: 2 hours, 25°C: 2 hours, 40°C: 1 hour
- Hard Dry
- 16 hours
- Base Type
- Water-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Product Usage Type
- Topcoat
- Product Range
- Inter H2O
- Colour Family
- White
- Product Type
- Epoxy
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 3.5 hours
- Product Attributes
- Gloss Retention
- Product Attributes
- Colour Retention
- Product Attributes
- Low VOC
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Inter H2O 699 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions. Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
Price
£583.09
(incl. VAT)
In Stock and Available for Delivery
International Intercure 420
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions. Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...
Price
£366.35
(incl. VAT)
In Stock and Available for Delivery
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
Price
£380.90
(incl. VAT)
In Stock and Available for Delivery
International Thinner/Equipment Cleaner GTA991
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. International Thinner/Equipment Cleaner GTA991 is used for thinning compatible International products. It can also be used for the general...
In stock
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
Price
£131.14
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery