713 MMA Deck Coat is a three pack Methacrylate resin system, modified to impart toughness, resilience and waterproofing properties to the cured membrane. The abrasion and impact resistance, together with the low temperature flexibility and excellent adhesion to concrete and steel make 713 MMA Deck Coat an ideal material for uses as a membrane subjected to vehicular traffic.

Fast curing, slip-resistant membrane with excellent adhesion to concrete and steel.

Typical uses include as a slip resistant membrane for car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc.

This product is for Professional Use Only.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Typical Properties
• Surface Preparation
• Priming
• Mixing
• Application
• Sealing
• Equipment Cleaning
• Curing
• Storage and Shelf Life
• Coverage
• Limitations

Features & Benefits

• Ultra-fast curing characteristics
• Tough, resilient, and highly durable
• Resistant to oil, petrol, diesel and many industrial chemicals
• Flexible and abrasion resistant
• 4000+ colour options from RAL, BS and NCS allow easy differentiation of specific areas e.g. walkways and parking bays in different colours
• Low temperature cure, down to -30°C
  • * Refer to our Technical Department for advice on 0113 2455450 (option 2) or send a message to [email protected]
• Suitable for indoor and outdoor surfaces
• Excellent adhesion to concrete and steel
• 20kg pack is sufficient to cover an area of 2.8m² at a thickness of 4mm.

Typical Properties

* Refer to our Technical Department for advice on 0113 2455450 (option 2) or send a message to [email protected]

Surface Preparation

Concrete surfaces shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes, etc.

Blow holes and defective concrete shall be made good using a proprietary repair compound e.g. 710 MMA Repair Mortar. Suitable mechanical treatment, such as vacuum grit blasting, is the preferred treatment prior to application as this ensures a mechanical ‘key’ which will optimise adhesion.

Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish Standard and to provide a medium blast profile.

All dust shall be removed prior to coating application. A coat of 707 MMA Metal Primer shall be applied as soon as practicable after blasting, in order to obviate the possible occurrence of ‘flash rusting’.

Priming

Concrete surfaces shall be primed with a coat of 706 MMA Floor Primer, applied by brush, or roller, at a nominal rate of 0.3kg/m². Long nap lambswool rollers are recommended for primer application. Allow primer to cure for a minimum of 40 minutes.

Steel surfaces shall be primed with 707 MMA Metal Primer.

Mixing

713 MMA Deck Coat is supplied as a three-pack material consisting of the BASE component, the CATALYST component and the FILLER component.

Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means for a minimum of 2 minutes.

Pour the contents into a mixing vessel and add the FILLER component whilst stirring. A low speed drill with paddle attachment may be used or else a forced action mixer e.g. Creteangle type.

Application

Pour the mixed material onto the prepared and pre-primed surface and apply by serrated trowel to the desired thickness. De-aerate the material by spike rollering.

Within 5 minutes, broadcast the appropriate aggregate at a nominal rate of 6kg – 15kg/m². When cured, sweep off excess aggregate.

Sealing

The application of a clear sealer coat is recommended to reduce tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning where required.

Apply a roller coat of 705 MMA Clear Seal Coat F or 701 MMA Floor Coating at a nominal rate of 0.3 – 0.5kg/m² and allow to cure for a minimum of 2 hours prior to putting back into service.

A second coat maybe necessary where large aggregate has been used as scatter.

Equipment Cleaning

Clean equipment with 109 Tool Cleaner immediately after use.

Curing

• Light Foot Traffic: 1 hour @ 20°C
• Full Chemical Resistance: 24 Hours @ 20°C

Storage and Shelf Life

• Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
• Adequate ventilation of the storage area should be provided
• Keep container tightly closed when not in use
• 713 MMA Deck Coat has a minimum shelf life of 6 months when stored in original, unopened containers in accordance with manufacturer’s instructions

Coverage

A 20kg pack is sufficient to cover an area of 2.8m² at a thickness of 4mm.

Limitations

• Do not apply to wet, uncured or unprimed concrete surfaces
• 713 MMA Deck Coat will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered