- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
2 pack, fast curing, clear sealer designed to be used as the finish coat for other flooring products in the Rawlins MMA range.
- Ultra-fast curing - accepts light foot traffic after 1 hour @ 20°C
- Available in `Standard` and `Flexible` grades
- Easy to apply
- Chemical and abrasion resistant
- Hygienic and easily cleaned
- Thermal shock resistant
- Recommended to reduce any tendency towards staining and dirt pick up
- Ensures optimum ease of cleaning of the Methacrylate resin floor system
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
705 MMA Clear Seal Coat is a two pack, fast curing, clear sealer designed to be used as the finish coat for other flooring products in the Rawlins MMA range.
The application of a clear sealer coat is recommended to reduce any tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning of the Methacrylate resin floor system.
This product is available in 'standard' and 'flexible' grades.
NOTE: Where a flexible grade sealer is required, such as when using over 713 MMA Deck Coat, select the Flexible Grade of this product 705 MMA Clear Seal Coat (F) in the 'Option' tab.
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Surface Preparation
- Mixing
- Application
- Equipment Cleaning
- Curing
- Storage and Shelf Life
- Coverage
- Limitations
- Health & Safety
Features & Benefits
- Available in 'Standard' and 'Flexible' grades
- Ultra-fast curing -accepts light foot traffic after 1 hour @ 20°C
- Easy to apply
- Chemical and abrasion resistant
- Hygienic and easily cleaned
- Thermal shock resistant
Typical Properties
Typical Properties | |||
---|---|---|---|
Pot life @ 20°C: | 15 Minutes | ||
Colour: | Clear | ||
Temperature range during application: | -20°C* to +40°C | ||
Temperature range during service: | -40°C to +90°C |
*For low temperature conditions please consult our technical department for recommendations.
Chemical Resistance | |
---|---|
Chemical | Resistance |
Dilute Acids and Alkalis | Excellent |
Oil | Excellent |
Petrol | Excellent |
Diesel | Excellent |
Vegetable Oils | Excellent |
Fruit Juices | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Surface Preparation
- Previously applied Rawlins MMA systems shall have been allowed to cure for a minimum of 1 hour @ 20°C
Mixing
- 705 MMA Clear Seal Coat / (F) is supplied as a two pack material consisting of a BASE component and a CATALYST component
- Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means
Application
- Apply by short nap perlon, or smooth lambswool rollers, at a nominal rate of 0.3 – 0.6kg/m², depending on surface profile
- Note: A second coat applied at the same rate is recommended where aggressive chemicals or heavy wear will be encountered
Equipment Cleaning
Clean equipment with 109 Tool Cleaner immediately after use.
Curing
- Light Foot Traffic: 1 hour @ 20°C
- Vehicular Traffic: 2 hours @ 20°C
- Full Chemical Resistance: 24 hours @ 20°C
Storage and Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C
- Adequate ventilation of the storage area should be provided
- Keep container tightly closed when not in use
- 705 MMA Clear Seal Coat / (F) has a minimum shelf life of 6 months when stored in original, unopened containers in accordance with manufacturer’s instructions
Coverage
A 5kg pack will be sufficient to treat an area of 16.7m² with a single coat of sealer @ 0.3kg/m².
Limitations
- Do not apply to wet, uncured or unprimed concrete
- 705 MMA Clear Seal Coat / (F) will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered
Health & Safety
- 705 MMA Clear Seal Coat / (F) is flammable during application, so that adequate safety precautions should be observed
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Please refer to Material Safety Data Sheet for additional information
- 406 Floor Seal shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Professional Use
- Application Method
- Perlon, Roller
- Sheen
- Semi-Gloss
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Fully Cured (at 20°C)
- 24 Hours
- Pot Life (at 20°C)
- 15 Mins
- Coverage
- A 5kg pack will be sufficient to treat an area of 16.7m² with a single coat of sealer @ 0.3kg/m²
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- -20°C
- Shelf Life (from date of manufacture)
- 6 Months
- UN Number (Activator)
- UN3106
- UN Number (Base)
- UN1866
- Dry for Light Traffic (at 20°C)
- 1 Hour
- Suitable For Use On
- Floors
- Application Method
- Roller
- Components
- 2K
- Product Usage Type
- Sealer
- Product Category
- Paints
- Colour Family
- Clear
Questions
Question about the product
Bev on 2022-07-26 11:48:20 | Question:
Would your 705 MMA Clear Seal Coat be suitable to seal an external tiled balcony - the tiles are unglazed porcelain and tightly butt jointed (not grouted) laid directly onto a dense concrete structural shelf |
Answer from Rawlins’ Technical Team:
Unfortunately no, this product is to be used as a topcoat for other Rawlins MMA products. Please provide more information and pictures of the area to [email protected] and we can assist with an alternative. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
705 MMA Clear Seal Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...
713 MMA Deckcoat
3 pack methacrylate resin system in 10 colours for use as a slip resistant membrane for vehicular traffic on car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc. Ultra-fast curing - low temperature cure, down to...