RSL Industrial Floor Cleaner is a highly effective, versatile aqueous cleaner and degreaser.

The powerful cleaning action easily removes oils, grease and heavy soiling from most flooring surfaces.

RS Industrial Floor Cleaner leaves no smears or residues upon rinsing. It may be used after RSL Tyre Mark Remover or RSL HD Tyre Mark Remover during remedial cleaning of painted floors to ensure complete removal of rubber and tyre marks.

Safe to use on concrete, quarry tiles, plastics including vinyl, ceramics, rubber, glass, enamel, metals, painted surfaces, etc.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Application Rates and Methods
• Typical Physical Characteristics
• Storage and Handling
• Disposal
• Health and Safety

Features & Benefits

• Highly effective, versatile aqueous cleaner and degreaser
• Powerful cleaning action
• Easily removes oils, grease and heavy soiling from most flooring surfaces
• Leaves no smears or residues upon rinsing
• May be used after RSL Tyre Mark Remover or RSL HD Tyre Mark Remover during remedial cleaning of painted floors to ensure complete removal of rubber and tyre marks
• Safe to use on a variety of surfaces, including but not limited to:
• Concrete
• Quarry tiles
• Plastics including vinyl
• Ceramics
• Rubber
• Glass
• Enamel
• Metals
• Painted surfaces

Application Rates and Methods

Manual

Dilute 1 part product in 20 to 50 parts water. Dilution rate depends on level and type of soiling. Clear tap water can be used, but for optimum results use water at approx 40℃.

Apply to surface with cloth, sponge, spray or mop and bucket. Rinse and leave to dry as necessary.

Floor Cleaning Machines/Scrubber Driers

Dilute 1 part product in 50 parts water and add to the tank of the automatic floor cleaning machine. Make the first pass of the machine without using the vacuum, allowing the product additional contact time with the floor. On the second pass, scrub floor and recover waste water as usual.

Pressure Washers

Use at a rate of 1 part product in 30 to 100 parts water through medium or high pressure washer. Product may be applied at low pressure and then removed with high pressure if required.

Typical Physical Characteristics

Storage and Handling

Shelf Life (unopened containers) : 12 Months

Protect against frost. Where product has been stored in cold temperatures, leave to reach ambient temperature prior to use. Handle in accordance with good industrial practise; no special precautions required with product alone.

Disposal

Contaminated product and/or rinse water should be disposed of in accordance with local regulations. For more information please refer to the Product MSDS, available in the "data sheets tab" further above.

Health and Safety

RS Industrial Floor Cleaner should not cause any health and safety issues, when used in accordance with the recommended instructions. R.S. Industrial Floor Cleaner is non ‑ hazardous and contains no silicates, solvents, phosphates or harmful biocides. For more information please refer to the Product MSDS.