- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in 5 colours.
- Water-based paint with an anti-slip finish.
- For concrete, wood, tarmac, stone, brickwork, and prepared metal.
- Low odour, fast-drying, and hard-wearing.
- Interior or exterior use, wet or dry.
Coo-Var Anti-Slip Step and Ramp Paint
Coo-Var Anti-Slip Step and Ramp Paint is specifically designed to create a durable, hard-wearing surface on steps and ramps, reducing the risk of slips and falls in high-traffic areas. The water-based formula makes it suitable for various surfaces, such as concrete, wood, tarmac, stone, and metal. Its fast-drying properties ensure quick application, minimising downtime for busy environments. The paint is available in five colours: Tile Red, Grey, Yellow, Black, and Access Blue.
Application Guidelines
Before applying, ensure all surfaces are clean, dry, and free from contaminants. Concrete surfaces should be roughened to provide an adequate key, which can be done mechanically or with an etching solution like Coo-Var Acid Etch. Wooden surfaces, metal, and other substrates should be appropriately primed for maximum adhesion. Apply the product using a brush or roller, ensuring even coverage. Avoid using the product in temperatures below 7°C, as this can affect the drying time and finish quality. The recommended recoat time is 6 hours.
Performance and Durability
Tested independently, the anti-slip paint boasts a Pendulum Test Value of 68 in dry conditions and 58 in wet, exceeding the UK legal minimum of 36 for slip resistance. Its low odour and quick-drying formula allow for use in both indoor and outdoor settings, providing long-lasting protection against wear and tear. The water-based nature of this product means it is easy to clean and maintain.
Restrictions and Limitations
Do not apply the paint if the temperature is below 7°C or in high humidity, as these conditions can negatively affect the drying time and performance. The product is not suitable for surfaces that have not been properly prepared or primed. Avoid applying on surfaces prone to excessive moisture, and ensure good ventilation during application to allow proper drying. Always consult the product data sheet before use for more detailed instructions and safety measures.
Recommended Complementary Products
For metal surfaces, use the Coo-Var All Metals Primer before applying this anti-slip paint. For new concrete, consider using Coo-Var Acid Etch to prepare the surface. These products will enhance adhesion and durability, ensuring optimal results. Always follow the manufacturer’s recommendations for the best application results.
Health and Safety
Requires users to wear protective gloves and eye protection during application. It contains substances that may cause an allergic reaction and should be handled with care, avoiding inhalation or skin contact. Dispose of waste material in accordance with local regulations.
Data sheet
- Manufacturer
- Coo-Var
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water
- For Use On
- Concrete, Wood, Tarmac, Stone, Brickwork, Metal
- Application Method
- Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
- Touch Dry (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- 6 hours
- Fully Cured (at 20°C)
- 5 to 7 days
- Coverage
- 5 to 9 sq.m / litre @ 35 microns D.F.T.
- Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- 7 °C
- Solids by Volume
- 34 to 36%
- VOC
- max 41g / litre
- Recommended Dry Film Thickness
- 35 to 40 microns
- Recommended Wet Film Thickness
- 100 to 110 microns
- Specific Gravity
- 1.25 to 1.31 @ 20 °C
- Viscosity
- 2.5 Poise @ 25 °C
- Hard Dry
- 4 hours @ 20 °C
- Base Type
- Water-Based
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Concrete Steps
- Suitable For Use On
- Steps
- Suitable For Use On
- Wood Steps
- Suitable For Use On
- Metal Steps
- Suitable For Use On
- Metal Ramps
- Suitable For Use On
- Stone Ramps
- Suitable For Use On
- Tarmac Ramps
- Suitable For Use On
- Brick Ramps
- Suitable For Use On
- Metal
- Suitable For Use On
- Wood Ramps
- Suitable For Use On
- Concrete
- Suitable For Use On
- Stone Steps
- Suitable For Use On
- Brick
- Suitable For Use On
- Tarmac Steps
- Suitable For Use On
- Stone
- Suitable For Use On
- Brick Steps
- Suitable For Use On
- Wood
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Coated Surfaces
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Anti-Slip
- Colour Family
- Grey
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Anti-Slip Step and Ramp Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Coo-Var Water Based All Metals Primer
In Matt Red or Grey. Water-based metal primer for anti-corrosive protection. For iron, steel, aluminium, brass, copper, and galvanised surfaces. Enhances adhesion for topcoats. Non-flammable and low VOC.
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...