- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Single pack polyurethane floor coating in 350+ gloss colours for concrete and wooden floors and light traffic areas.
- As an easy to use maintenance paint for light duty areas in shops, warehouses and industrial plant.
- Economic, easily applied coating.
- Mild solvent blend to minimise reaction with existing floor coatings and minimise the lifting of old coating edges.
- Brush or roller application for easy routine floor repainting.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartAxalta ViterFloor 276 Floor Paint is a single pack polyurethane floor coating for general purpose and light traffic areas.
Axalta ViterFloor 276 Floor Paint is an economic, easily applied floor coating for concrete and wooden floors. It has a mild solvent blend to minimise reaction with existing floor coatings and minimise the lifting of old coating edges.
For use as an easy to use maintenance paint for light duty areas in shops, warehouses and industrial plant. Brush or roller application for easy routine floor repainting.
Approvals/Certification - Please consult Axalta Coating Systems or Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Single pack polyurethane floor coating for general purpose and light traffic areas
- Economic, easily applied
- Mild solvent blend to minimise reaction with existing floor coatings and minimise the lifting of old coating edges
- For concrete and wooden floors
- As an easy to use maintenance paint for light duty areas in shops, warehouses and industrial plant
- Brush or roller application for easy routine floor repainting
- Accepts light traffic after 16-24hrs at 23°C
Product Specification
Technical Data | |
---|---|
Axalta Viterfloor 276 Floor Paint | |
Volume Solids | 45 ± 2% (may vary with colour) |
VOC Content | 462 + 20 g/litre (may vary with colour) |
SG | 1.00 kg/lt (may vary with colour) |
Storage Conditions | Store in dry, cool conditions and protect from frost |
Shelf Life | Minimum 12 months if stored as above in unopened containers |
Flash Point | 23-60°C |
Film Thickness Range And Coverage
Film Thickness Range & Coverage | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
Minimum | 30 µm | 67 µm | 15.0 m 2/litre |
Maximum | 50 µm | 111 µm | 9.0 m 2/litre |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated |
Drying Times
Drying Times | ||||
---|---|---|---|---|
Applied to 40 microns DFT | 23℃ | |||
Dust Dry | 3 hr | |||
Light Traffic | 16-24 hr | |||
Full Cure | 7 Days | |||
Recoating | See Product Notes | |||
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation |
Surface Preparation
- All surfaces must be clean, dry, and free from grease, oil, laitance, dust and other contamination
Bare Concrete:
- Remove dirt and contamination by detergent washing, flame cleaning or other appropriate means
- For the best long term coating life, laitance should be removed by vacuum blast cleaning (recommended), power grinding or acid etching
- If acid etching, more than one application may be required to produce a granular surface suitable for good adhesion
- Vacuum blast cleaning should produce a surface profile appropriate to the thickness of the coating being applied
- If laitance is not removed, it can detach in service along with the coating, leaving patchy areas of bare concrete
Previously Painted Floors:
- Abrading (as well as thoroughly cleaning) the existing coating is always recommended to optimise adhesion
- As ViterFloor 276 has a mild solvent blend, there should be minimal reaction with existing coatings such as the lifting of old coating edges
- A test area is recommended to confirm compatibility and that adequate adhesion can been achieved
Wood Floors:
- Punch all nail heads down below the surface
- Sand the surface down to clean, smooth wood using an industrial vacuum sander, cutting-in at edges with a hand sander
- To give a smooth finish it is recommended to also lightly sand and vacuum between coats
Steel Floors:
- Please consult Axalta Coating Systems or Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information
Mixing
- Must be mixed thoroughly by using a mechanical agitator before use
- Agitate periodically during use to ensure product remains homogeneous
Thinner
Thinner
Equipment Cleaner
Application Conditions
- The concrete surface must be dry and at least 12 weeks old
- The moisture content of the concrete should not exceed 6% when measured 25mm below the surface (with e.g. a Protimeter measuring in 25mm drilled holes filled with gel), or 14% when measured with a surface moisture gauge (such as a Protimeter WME (Wood Moisture Equivalent) gauge)
- Only apply in conditions of good ventilation which must be maintained during drying and curing
- Do not apply when rain, mist, sleet or snow are imminent
- During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and the steel temperature should remain at least 3°C above the dew point
- Only apply this product when the above conditions can be maintained throughout the critical application and drying/curing process
- Paint temperature should ideally be at a minimum of 15ºC
Application Methods
- This product is designed for brush or roller application
Product Notes
- Priming: Prime bare concrete areas by thinning the first coat of ViterFloor 276 with 10-20% of 1050 Thinner to act as a sealer
- Overcoating: Overcoat either wet-on-wet, or after a minimum of 16 hours at 20ºC. After 3 days at 20ºC, light abrasion will be necessary in order to achieve optimum adhesion
- Anti-Slip: Dependent on the degree of anti-slip required, aggregate can be broadcast onto the wet coating surface (of a full, unthinned coat) and allowed to dry. Surplus non-adhering particles should then be brushed off and further coats of ViterFloor 276 applied to encapsulate the particles
- Some shades may contain lead-based colourants and these are labelled (L)
Health & Safety
- Containers are provided with safety labels which should be observed
- Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Axalta Coating Systems
- For Use On
- Concrete, Wood
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Coverage
- 15.0 m²/litre @ 30µm DFT - 9.0 m²/litre @ 50µm DFT
- Recommended Thinner/Cleaner
- Thinner 1050
- Solids by Volume
- 45 ± 2% (may vary with colour)
- Shelf Life (from date of manufacture)
- 12 Months
- Recommended Dry Film Thickness
- 30µm-50µm
- Recommended Wet Film Thickness
- 67µm-111µm
- UN Number
- UN1263
- Fully Cured (at 23°C)
- 7 Days
- Specific Gravity
- 1.00 kg/lt (may vary with colour)
- Base Type
- Solvent-Based
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Product Usage Type
- Topcoat
- Product Range
- ViterFloor
- Colour Family
- Dark
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Product Type
- Polyurethane
- Product Attributes
- Tintable
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterFloor 276 Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT