Astroflame Fire & Acoustic Internal Socket Box Inserts are used to restore the fire rating of a wall otherwise compromised by apertures and gaps following the fitting of socket boxes. This design also restores the acoustic and thermal performance of the wall and its air-tightness.

Inserts are quick and easy to fit in comparison with traditional putty pads.

Once a hole is made in the wall for a recessed switch or socket box, the integrity of the construction and its ability to perform in a fire can be significantly reduced. The acoustic performance of the wall is also affected and air leakage will increase.

Air leakage allows heat loss and noise transmission. A single socket can leak over 3.5 cubic metres of air per hour and the combined air leakage of all the sockets in a room can create significant thermal loss.

The graph opposite show how our socket box inserts improve air-tightness at normal room air pressures. A correctly fitted insert can almost match the performance of an unpenetrated wall.

The material used to construct the socket insert is a good insulator, which further prevents heat loss and maintain insulation continuity of the wall.

Acoustic performance is good, being rated at -67dB

The socket box inserts are quicker and easier to fit that traditional putty pads. In a fire the inserts flanged design ensures that the fire resistant material remains in place to limit the spread of fire through the socket penetration.

Astro FRA Socket Box Inserts are designed to fit common plastic / metal single / double socket box sizes.

• Easy to install putty pad alternative
• Single and Double socket sizes available
• Tested to BS EN 1363-1 | BS EN 1364-1 for up to 120 mins
• Provides an effective acoustic barrier to both impact and airborne sounds
• Maintains the fire protection performance of the wall- preventing or delaying the spread of fire
• Prevents or delays fire from entering a wall cavity and attacking the building structure
• The inserts are pre-formed to fit all common socket box types
• Simple and fast mechanical fixing, no adhesives, no mess
• Can be retro fitted to existing sockets / switches or fitted during wall construction
• Replaces time consuming plasterboard lining of sockets / switches
• The Socket box insert can be removed and replaced if additional wiring is required
• Unique flanged design holds the socket box insert in place during a fire
• Acoustic Tested to BS EN ISO 140-3: 1995 and BS EN ISO 717-1: 1997

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.