Is this suitable for treating a garage floor which has water seeping into it when there is heavy rain or is it mainly cosmetic?

No, this product is for application to clean and dry prepared concrete garage floors, including old adhering coatings, and not recommended for use on smooth/dense concrete or surfaces treated with curing compounds. It can withstand occasional water contact such as vehicles entering with rainwater on the wheels, but would advise against using if larger volumes of water are be expected to be present on the surface for extended periods.

Hi, can I put a clear coat on this product, which would you recommend to use Thanks

Yes, you could consider Rust-Oleum 4900 Polycoat 2K , this is available in a matt or gloss finish. If the original paint is still within its overcoating window, this can be applied without additional preparation assuming the floor is clean, dry and sound. Outside of this time it will need to be cleaned and sanded to provide a key.

Hi, I have just poured a garage floor. The 2 stupid dogs were let out and have ran over the almost set concrete. If I was to use a latex self levelling compound to remove e paw prints could I use this product to paint the floor???

Assuming the applied levelling compound states it is overpaintable, has sufficent compressive strength, is clean, dry, sound and prepared as detailed in the technical data sheet this would be suitable.

Hi, I've recently used setcrete exterior self leveler on my garage floor. I've contacted setcrete and they stated their leveler contains spray-dried acrylic polymer and does not contain latex. Would this product be compatible to use? Many thanks,

Assuming a damp proof membrane is present below the concrete slab, the manufacturer of the self leveling compound confirms it is suitable to be used as a wear layer and over painted this kit could be used.

Hello, I have a concrete garage floor without a self levelling compound applied, will the resin fill minor imperfections and impressions in the concrete slab?

Any floor paint would be too thin a build product to mask any imperfections, these would need to be addressed prior to painting.

The garage is used for my large motorbike , how slippy is the surface and especially with wet tyres

This paint does not have any anti-slip properties, assuming you wish to have an anti-slip finish, the floor is concrete, it is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Rust-Oleum 5300 Epoxyshield Maxx used in conjunction with Epoxyshield Antislip Additive .

Do i need to apply two coats of the paint for best results. If so does one kit allow me to do that without the unused paint drying out between coats or do I need to buy two kits?

Assuming the concrete floor is clean, dry, sound and prepared as detailed in the technical data sheet only one coat is required, but additional coats can be applied. The mixing ratio is listed in the technical data sheet but to avoid mixing issues it is recommended to mix complete tins. The pot life of this product at 20°C is 1.5hours.

Do I need a clear coat of epoxy sheald on top of this?

Assuming the floor is subject to foot and vehicle traffic a clear coat is not required.

Rust-Oleum Epoxyshield Garage Floor Coating Kit Please can you tell me what tools / equipment I need for this product? Also - can you suggest what type of roller would be best? Thanks

For application of this product we can recommend our Floor Application Kit . This comes with a 15ltr scuttle, a pack of brushes, 12" roller frame, pole and 2 rollers made to withstand solvents.

This product looks like a good option for finishing my double garage floor, can you advise if rustoleum sell a compatible epoxy product to increase the surface area spread rather than another entire kit, my sq ft is 272 and I’m not confident this kit will cover it to the recommended thickness?

The kit covers 25m², your floor is 25.3m² unfortunately the epoxy in this kit is not available seperately, we would recommend 2 kits for this application. Or assuming the floor is clean, dry, sound and prepared as detailed in the Technical Data Sheet you could consider this similar product Rust-Oleum 5300 Epoxyshield Maxx . You would require 3.8ltrs per coat.

I see the garage floor paint is water based with epoxy resin how strong is the odour given off and the approximate time I can expect the smell to last. Regards Keith Hartley

We have no way of accurately describing the strength of odour to you but any odour present should be greatly reduced when touch dry (after 16 hours) and completely gone once fully cured (7 days). Good ventilation and drying conditions will help considerably.

Hello there, I have a 70m2 garage and was wondering what the working time is on this product? Would I have to do the entire floor using all three kits at once or can they be overlapped? Or is there a better product I should consider, the floor isnt overly smooth and the idea behind using this is it might hide a lot of the imperfections you see? Do you do anything else that adds flecks etc? Regards Mark

You can download the Product Data Sheet from the 'Attachments' tab on the product page which goes through the product drying times, preparation, application etc. The floor area would need to be done in one go ideally as the data sheet advises to maintain a wet edge to prevent lap marks and gloss differences.

Does this come with the acid etch and degreaser?

Rust-Oleum Epoxyshield Garage Floor Coating Kit inculdes; Part A & B of the Rust-Oleum Epoxyshield Garage Floor Coating Concentrated Cleaner Decorative Chips Stir Stick Instruction Sheet DVD

Epoxyshield garage floor coating kit - can this product be applied directly onto a newly laid integral garage concrete floor (in a new build house) which hasn’t been sealed with a concrete sealer, or do I need to seal the floor first before covering with this paint?

Rust-Oleum Epoxyshield Garage Floor Coating Kit is intended for application directly to bare, concrete floors, which are completely clean and dry (fully cured). It is not recommended to apply on smooth/dense concrete or concrete containing a curing compound, which will prevent a good adhesion.

Can this product be put on painted concrete and the floor is not smooth concrete.?

The existing paint must be well adhered and also two pack to enable the Rust-Oleum Epoxyshield Garage Floor Coating Kit to be applied. If this is the case prepare by way of cleaning thoroughly and abrading to provide a key for the new coating to stick to.

Is this paint suitable to be applied to a floor levelled with Bostik Screedmaster Ultimate?

Bostik Screedmaster Ultimate according to Bostik is not intended to be a finished floor surface and is required to have a final floor covering applied such as tiles, wood laminate, carpet, etc. Although Rust-Oleum Epoxyshield Garage Floor Coating Kit should adhere reasonably well to the screed, no long term durability could be guaranteed due to the soft nature of the Bostik screed you have used.

What other products do I need to prep the garage floor before applying Rust-Oleum Epoxyshield Garage Floor Coating Kit?

You shouldn't need anything else, the kit comes with a cleaning solution to use on the floor prior to application of the coating. If your floor is damaged and requires repair mortar then you can choose from Rust-Oleum Epoxyshield Concrete Repair Mortar , Rust-Oleum Epoxyshield Fine Crack Repair or Rust-Oleum 5412 Epoxy Filler . Watch the video for Rust-Oleum Epoxyshield Garage Floor Coating Kit HERE .

Rust-Oleum Epoxy Shield Garage Floor Paint Coating Kit

Rust-Oleum Epoxyshield Garage Floor Coating Kit

Reference 203005.3.78

Brand Rust-Oleum

Search ID RUS539

Available in grey.
For clean and dry concrete floors, including old adhering coatings.
Resistant to gasoline, antifreeze, motor oil, salt, and hot tire pick-up.
Comes with a complete kit and detailed instructions for easy application.

Colour

Grey

Size

£89.84(incl. VAT)

£74.87(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

17 questions about the product

Description

Rust-Oleum Epoxyshield Garage Floor Coating Kit - Durable Epoxy Concrete Coating

The EpoxyShield Garage Floor Coating is a high-quality, water-based epoxy designed for ultimate adhesion and durability. Perfect for both new and old concrete surfaces, it resists wear, impact, and abrasion, making it ideal for garages with heavy foot and vehicle traffic.

Features and Benefits

Ultimate Adhesion: Ensures a strong bond to concrete surfaces, preventing peeling and flaking.
Durability: High resistance to gasoline, antifreeze, motor oil, salt, and hot tire pick-up.
Easy Application: Complete kit with detailed instructions for user-friendly application.
Environmentally Friendly: Low VOC content of 53 g/l, complying with EU regulations.
Versatile Usage: Suitable for new and old concrete surfaces, ensuring a fresh, professional look.

Application Instructions

For best results, apply EpoxyShield on clean, dry concrete floors. Avoid using on smooth/dense concrete or surfaces treated with curing compounds. Ensure the floor is thoroughly cleaned, and mix the epoxy components as per the instructions. Apply with a roller, maintaining a wet edge to prevent lap marks. Optional decorative paint chips can be added for a stylish finish.

Restrictions and Limitations

Do not apply on floors treated with levelling mortar or anhydride floors. Avoid application in temperatures below 15°C. Ensure proper ventilation during application and drying times. Always refer to the downloadable data sheet for detailed information.

Complementary Products

Enhance your flooring project with additional Rust-Oleum products such as EpoxyShield Cleaner/Degreaser. These products ensure optimal surface preparation and repair before applying the floor coating.

Health and Safety

UN Number: UN3082 (Activator), UN3066 (Base)
Safety Information: Causes skin and eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long-lasting effects.
Contains: 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane, 2,3-epoxypropyl o-tolyl ether.
Always refer to the safety data sheet for comprehensive health and safety guidelines.

Product Details

Reference 539-890021

Data sheet

Manufacturer: Rust-Oleum
For Use By: Consumer Use
Interior / Exterior Use: Interior Use
For Use On: Garage Floors
Concrete Floors
Application Method: Roller
Colour: Standard / Ready Mixed
Parts: 2 Parts
Mixing Ratio: Base : Activator 3 : 1 (volume)
Key Features: 2-part water based epoxy. Complete kit including instructions. Resists gasoline, antifreeze, motor oil, salt and hot tire pick-up
Dry to Handle (at 20°C): 16 hours
Dry to Recoat (at 20°C): 48 hours
Fully Cured (at 20°C): 7 days
Pot Life (at 20°C): 1.5 hours (at 20°C)
Coverage: 25m² per kit
Max. Application Temperature: 35ºC
Min. Application Temperature: 15ºC
Solids by Volume: 63.60%
VOC: 53 g/l
Shelf Life (from date of manufacture): 5 years
UN Number (Activator): UN3082
UN Number (Base): UN3066
Base Type: Water-Based
Base Type: Epoxy
Suitable For Use On: Workshop Floor
Suitable For Use On: Concrete Floors
Suitable For Use On: Garage Floors
Finish: Satin
Application Method: Roller
Manufacturer: Rust-Oleum
Usages: Abrasion Resistant
Usages: Oil Resistant
Product Usage Type: Topcoat
Product Usage Type: Floor System Pack
Colour Family: Grey

Attachments

Download

Product Data Sheet

Download

Base Safety Data Sheet

Download

Activator Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Michael Lexton on 2024-07-22 16:06:49	Question: Is this suitable for treating a garage floor which has water seeping into it when there is heavy rain or is it mainly cosmetic?
	Answer from Rawlins’ Technical Team: No, this product is for application to clean and dry prepared concrete garage floors, including old adhering coatings, and not recommended for use on smooth/dense concrete or surfaces treated with curing compounds. It can withstand occasional water contact such as vehicles entering with rainwater on the wheels, but would advise against using if larger volumes of water are be expected to be present on the surface for extended periods.

David on 2023-09-08 13:24:11	Question: Hi, can I put a clear coat on this product, which would you recommend to use Thanks
	Answer from Rawlins’ Technical Team: Yes, you could consider Rust-Oleum 4900 Polycoat 2K, this is available in a matt or gloss finish. If the original paint is still within its overcoating window, this can be applied without additional preparation assuming the floor is clean, dry and sound. Outside of this time it will need to be cleaned and sanded to provide a key.

Dan gardner on 2022-08-05 21:10:10	Question: Hi, I have just poured a garage floor. The 2 stupid dogs were let out and have ran over the almost set concrete. If I was to use a latex self levelling compound to remove e paw prints could I use this product to paint the floor???
	Answer from Rawlins’ Technical Team: Assuming the applied levelling compound states it is overpaintable, has sufficent compressive strength, is clean, dry, sound and prepared as detailed in the technical data sheet this would be suitable.

Michael on 2022-06-07 16:10:03	Question: Hi, I've recently used setcrete exterior self leveler on my garage floor. I've contacted setcrete and they stated their leveler contains spray-dried acrylic polymer and does not contain latex. Would this product be compatible to use? Many thanks,
	Answer from Rawlins’ Technical Team: Assuming a damp proof membrane is present below the concrete slab, the manufacturer of the self leveling compound confirms it is suitable to be used as a wear layer and over painted this kit could be used.

robert sawers on 2022-05-27 18:36:49	Question: Hello, I have a concrete garage floor without a self levelling compound applied, will the resin fill minor imperfections and impressions in the concrete slab?
	Answer from Rawlins’ Technical Team: Any floor paint would be too thin a build product to mask any imperfections, these would need to be addressed prior to painting.

Michael on 2021-07-07 06:05:16	Question: The garage is used for my large motorbike , how slippy is the surface and especially with wet tyres
	Answer from Rawlins’ Technical Team: This paint does not have any anti-slip properties, assuming you wish to have an anti-slip finish, the floor is concrete, it is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Rust-Oleum 5300 Epoxyshield Maxx used in conjunction with Epoxyshield Antislip Additive .

Chris on 2021-06-04 14:08:58	Question: Do i need to apply two coats of the paint for best results. If so does one kit allow me to do that without the unused paint drying out between coats or do I need to buy two kits?
	Answer from Rawlins’ Technical Team: Assuming the concrete floor is clean, dry, sound and prepared as detailed in the technical data sheet only one coat is required, but additional coats can be applied. The mixing ratio is listed in the technical data sheet but to avoid mixing issues it is recommended to mix complete tins. The pot life of this product at 20°C is 1.5hours.

Cvetelin on 2021-05-21 14:55:19	Question: Do I need a clear coat of epoxy sheald on top of this?
	Answer from Rawlins’ Technical Team: Assuming the floor is subject to foot and vehicle traffic a clear coat is not required.

John on 2021-04-11 10:58:36	Question: Rust-Oleum Epoxyshield Garage Floor Coating Kit Please can you tell me what tools / equipment I need for this product? Also - can you suggest what type of roller would be best? Thanks
	Answer from Rawlins’ Technical Team: For application of this product we can recommend our Floor Application Kit. This comes with a 15ltr scuttle, a pack of brushes, 12" roller frame, pole and 2 rollers made to withstand solvents.

Adam on 2021-01-05 10:53:34	Question: This product looks like a good option for finishing my double garage floor, can you advise if rustoleum sell a compatible epoxy product to increase the surface area spread rather than another entire kit, my sq ft is 272 and I’m not confident this kit will cover it to the recommended thickness?
	Answer from Rawlins’ Technical Team: The kit covers 25m², your floor is 25.3m² unfortunately the epoxy in this kit is not available seperately, we would recommend 2 kits for this application. Or assuming the floor is clean, dry, sound and prepared as detailed in the Technical Data Sheet you could consider this similar product Rust-Oleum 5300 Epoxyshield Maxx. You would require 3.8ltrs per coat.

Keith Hartley on 2019-06-08 18:46:17	Question: I see the garage floor paint is water based with epoxy resin how strong is the odour given off and the approximate time I can expect the smell to last. Regards Keith Hartley
	Answer from Rawlins’ Technical Team: We have no way of accurately describing the strength of odour to you but any odour present should be greatly reduced when touch dry (after 16 hours) and completely gone once fully cured (7 days). Good ventilation and drying conditions will help considerably.

MARK GRAYSON on 2019-05-12 21:15:58	Question: Hello there, I have a 70m2 garage and was wondering what the working time is on this product? Would I have to do the entire floor using all three kits at once or can they be overlapped? Or is there a better product I should consider, the floor isnt overly smooth and the idea behind using this is it might hide a lot of the imperfections you see? Do you do anything else that adds flecks etc? Regards Mark
	Answer from Rawlins’ Technical Team: You can download the Product Data Sheet from the 'Attachments' tab on the product page which goes through the product drying times, preparation, application etc. The floor area would need to be done in one go ideally as the data sheet advises to maintain a wet edge to prevent lap marks and gloss differences.

James on 2019-03-23 02:44:30	Question: Does this come with the acid etch and degreaser?
	Answer from Rawlins’ Technical Team: Rust-Oleum Epoxyshield Garage Floor Coating Kit inculdes; Part A & B of the Rust-Oleum Epoxyshield Garage Floor Coating Concentrated Cleaner Decorative Chips Stir Stick Instruction Sheet DVD

Jason Case on 2019-01-01 20:52:34	Question: Epoxyshield garage floor coating kit - can this product be applied directly onto a newly laid integral garage concrete floor (in a new build house) which hasn’t been sealed with a concrete sealer, or do I need to seal the floor first before covering with this paint?
	Answer from Rawlins’ Technical Team: Rust-Oleum Epoxyshield Garage Floor Coating Kit is intended for application directly to bare, concrete floors, which are completely clean and dry (fully cured). It is not recommended to apply on smooth/dense concrete or concrete containing a curing compound, which will prevent a good adhesion.

Kathy marshall on 2016-09-03 13:12:12	Question: Can this product be put on painted concrete and the floor is not smooth concrete.?
	Answer from Rawlins’ Technical Team: The existing paint must be well adhered and also two pack to enable the Rust-Oleum Epoxyshield Garage Floor Coating Kit to be applied. If this is the case prepare by way of cleaning thoroughly and abrading to provide a key for the new coating to stick to.

Alan Bright on 2016-04-13 13:24:42	Question: Is this paint suitable to be applied to a floor levelled with Bostik Screedmaster Ultimate?
	Answer from Rawlins’ Technical Team: Bostik Screedmaster Ultimate according to Bostik is not intended to be a finished floor surface and is required to have a final floor covering applied such as tiles, wood laminate, carpet, etc. Although Rust-Oleum Epoxyshield Garage Floor Coating Kit should adhere reasonably well to the screed, no long term durability could be guaranteed due to the soft nature of the Bostik screed you have used.

campbell on 2015-09-17 18:30:41	Question: What other products do I need to prep the garage floor before applying Rust-Oleum Epoxyshield Garage Floor Coating Kit?
	Answer from Rawlins’ Technical Team: You shouldn't need anything else, the kit comes with a cleaning solution to use on the floor prior to application of the coating. If your floor is damaged and requires repair mortar then you can choose from Rust-Oleum Epoxyshield Concrete Repair Mortar, Rust-Oleum Epoxyshield Fine Crack Repair or Rust-Oleum 5412 Epoxy Filler. Watch the video for Rust-Oleum Epoxyshield Garage Floor Coating Kit HERE.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum Epoxyshield Garage Floor Coating Kit is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Rust-Oleum Epoxyshield Decorative Flakes

Suitable for use on floors coated with Epoxyshield. Mix and match chip blends to customise your colour scheme. Helps to hide dirt and surface imperfections. Durable and long-lasting finish. Easy to apply.

£8.96 (incl. VAT)

Shop now

In Stock and Available for Delivery

Rust-Oleum Epoxyshield Anti-Slip Additive

For use on any 2K paint floor coatings. Made from durable thermally split flint stones. Resists vehicular traffic for long-lasting performance. Can be pre-mixed or sprinkled onto wet paint.

£6.97 (incl. VAT)

Shop now

In Stock and Available for Delivery

Rust-Oleum 5200 Epoxyshield Ultra

Quick-drying water-based floor coating available in various greys. For concrete floors and old coatings. Satin matt finish. Good resistance to car tyres, diesel, motor oil, coolant fluid, and various household chemicals. Touch dry in just 2 hours.

£69.66 (incl. VAT)

Shop now

In Stock and Available for Delivery

Rust-Oleum 5300 Epoxyshield Maxx

A water-based industrial floor coating available in greys. For use on trafficked concrete floors. Highly resistant to solvents, chemicals, and car tyres. Easy to apply with no primer required. Long-lasting, glossy finish.

£98.50 (incl. VAT)

Shop now

In Stock and Available for Delivery

Rust-Oleum 5220 Epoxyshield Concrete Sealer | Dustproofing for Floors

Rust-Oleum 5220 Epoxyshield Sealer

Clear gloss finish. Water-based sealer for concrete. Reduces dust, simplifying cleaning. For bare and clean concrete floors. No thinning required. Touch dry in 1 hour, walkable after 8-12 hours.

£51.04 (incl. VAT)

Shop now

In Stock and Available for Delivery

Floor Application Kit

Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...

£101.80 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Rust-Oleum Epoxyshield Garage Floor Coating Kit

Rust-Oleum Epoxyshield Garage Floor Coating Kit

Rust-Oleum Epoxyshield Garage Floor Coating Kit - Durable Epoxy Concrete Coating

Features and Benefits

Application Instructions

Restrictions and Limitations

Complementary Products

Health and Safety

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Rust-Oleum Epoxyshield Decorative Flakes

Rust-Oleum Epoxyshield Anti-Slip Additive

Rust-Oleum 5200 Epoxyshield Ultra

Rust-Oleum 5300 Epoxyshield Maxx

Rust-Oleum 5220 Epoxyshield Sealer

Floor Application Kit