- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Marathon IQ2, a two component polyamine cured epoxy coating, providing superior resistance against impacts and abrasion. It has excellent ice friction performance & ice slip properties and can be used as primer, finish coat or as single coat system in atmospheric and immersed environments.
- The unrivalled combination of smoothness & toughness through ice
- Delivers approximately 4.5% improvement in hydrodynamic efficiency beyond current ice coatings on the market
- Applicable by single-feed standard airless spray
- Phenol-free
- High build, solvent-free
- Suitable for properly prepared carbon steel substrates
- Recommended for underwater hull in newbuilding & drydocking
- Suitable for new construction & structural steel to be immersed or exposed to up to very high corrosive environments
- Recommended for offshore environments, including splash zones
- Recognized by Lloyd's Register as an abrasion resistant coating for ice going vessels
- Approved as ice-resistant coating in accordance with RMRS Class Program for Classification & Construction of
- Sea-Going Ships, section 2.5, Part XIII, edition 2017
- Approved & listed by Federal Waterways Engineering & Research Institute (BAW)
Jotun Marathon IQ2, a two component polyamine cured epoxy coating. It is a high build, solvent free product. It provides superior resistance against impacts and abrasion. It has excellent ice friction performance and ice slip properties. Can be used as primer, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.
Typical use
Marine:
- Recommended for underwater hull in newbuilding and drydocking. Designed as a premium solution where abrasion resistance, impact resistance and ice slip properties are required. Suitable as anode shield around ICCP anodes.
Protective:
- Suitable for new construction and structural steel to be immersed or exposed to up to very high corrosive environments. Recommended for offshore environments, including splash zones. Designed as a premium solution where abrasion resistance, impact resistance and ice slip properties are required. Compatible with cathodic protection systems.
Approvals and certificates
- Recognized by Lloyd's Register as an abrasion resistant coating for ice going vessels
- Approved as ice-resistant coating in accordance with RMRS Class Program for Classification and Construction of
- Sea-Going Ships, section 2.5, Part XIII, edition 2017.
- Approved and listed by Federal Waterways Engineering and Research Institute (BAW)
Additional certificates and approvals may be available on request - contact our technical team on 0113 2455450 (option 2) or send a message to [email protected].
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Single, Two or Three Pack
- Two-Pack
- Base Type
- Solvent
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Immersion
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Primer & Topcoat
- Product Range
- Marathon
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Marathon IQ2 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT