Sikagard 112 Mortar & Brick Cleaner (formerley known as Sika Concrete Remover) is a highly concentrated, fast acting acid based formula which removes concrete waste and spillage. It also removes ingrained dirt and most paints on mineral surfaces such as brick, render and concrete.

• Removes concrete spills, waste and mortar
• Cleans brickwork and tools
• Also removes limescale

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Product Data
• Application Instructions
• Limitations

Features & Benefits

• Removes concrete spills, waste and mortar
• Cleans brickwork and tools
• Also removes limescale
• Acid based - powerful cleaning action
• Water clean up
• Economical in use
• Brush, spray or immerse

Product Data

Application Instructions

Application Method/Tools

Pre-wet any areas to be treated with clean water before application.

Immersion – using an acid proof container e.g. rubber, polypropylene, immerse the item for cleaning in a solution on 1 part Sika Concrete Remover to 1 part water. Immerse until concrete removed. Rinse with clean water.

Brushing – Brush apply neat Sika Concrete Remover to the area to be treated. Do not work in areas of more than 1m² at a time. Leave on concrete until re- moved.

Do not leave treated areas/items unattended until after area is washed down or neutralized.

CAUTION – COLOURED PAVING AND BLOCKS:

This product is extremely aggressive and can discolour certain types of paving flags and blocks. when applying to these substrates ALWAYS carry out a trial on an unseen area before applying.

Cleaning Of Tools

Rinse with a mixture of clean water and bicarbonate of soda after all treatments. For metal tools, we recommend applying grease or oil to the tool after cleaning. In case of spillages soak with water. Sika Concrete Remover is an acid and is corrosive to all metals.

Limitations

• Ensure container is always kept in a secure upright position during storage and transit.
• Take care when working on interior surfaces and with artificial stone.
• Always test a small area before applying to the entire surface. On very sensitive surfaces, a 1:2 (cleaner to water) dilution as a trial is recommended.
• Always wash the surface down after treatment.
• Protect plants and animals from contact when using.
• It is the user’s responsibility to determine suitability for use. If in doubt, contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected].