- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Rustins G Shield Electro Smog Shielding Paint is a new generation special carbon coating for reduction of electromagnetic interference (EMI). It is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
- Efficient electromagnetic interference reduction properties across a wide frequency range
- Environmentally friendly water-based coating
- Contains Graphite
- For indoor and outdoor use
- Breathable, low-emissions, solvent-free
- Lasting corrosion resistance, contains no metal
- Touch dry in 30 minutes - depending upon the temperature and humidity
- Can be applied over all commonly used emulsion paints
- Suitable for use in residential and commercial properties, schools and nurseries, hotels, hospitals, laboratories, military facilities, airports and tunnels
Rustins G Shield Electro Smog Shielding Paint is a new generation special carbon coating for reduction of electromagnetic interference (EMI). It is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
Rustins G-Shield is solvent free with low-emissions and has lasting corrosion resistance as the paint contains no metal particles. The carbon in the paint prevents the formation of corrosion on metal surfaces.
G-Shield has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20 GHz and higher, including the 5G frequency spectrum. The effectiveness of Rustins G-Shield has been tested at NPL, the national measurement standards laboratory for the United Kingdom.
Quick Links - Click To Jump To Section:
Features & Benefits
- New generation special carbon coating for reduction of electromagnetic interference (EMI
- High-quality water-borne, cross-linking acrylic resin
- Contains Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields
- Solvent free with low-emissions
- lasting corrosion resistance
- Has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20 GHz and higher, including the 5G frequency spectrum
- For indoor and outdoor use
- Can be applied over all commonly used emulsion paints
Product Specifications
Technical Data | |
---|---|
Rustins G Shield | |
Shielding Attenuation | Single Layer up to -57 Db, Double Layer up to -70 Db |
Thickness of single layer coating | 100 um |
Coats | Two coats will provide adequate shielding and coverage, but three coats are recommended for improved durability. For walls and ceilings up to three layers of coating are possible |
Drying Time | Touch dry in approximately 30 minutes depending upon the temperature and humidity |
Re-coating Time | Can be recoated after a minimum of three hours. Protect from rain at least for 24 hours |
Application Temperature | Do not apply at temperatures below 10˚C or in conditions of high humidity |
Coverage | 1 litre will cover approximately 5-6 sq m per coat |
Maintenance | Not applicable |
Compatibility | Can be applied under all commonly used emulsion paints and underneath clean organic plasters |
Settlement | Stir well before use |
Shelf Life/Storage | Store in a cool place. Keep away from children. Close container tightly after use and store it in a cool place for no more than 12 months. Protect from frost |
Application
- The surface must be clean and free from grease and wax
- If already painted, remove flaking paint by scraping, remove all rust with a scraper
- Stir well before use until there is no sediment in the bottom of the can
- Apply liberally with a synthetic fibre bristle brush
- Floor coverings can be laid directly on the shielding coverings
- When applying large area shielding coatings, grounding with self-adhesive copper strips up to 1 inch wide is recommended
Cleaning
- Remove as much paint as possible and return to this container
- Brushes should then be cleaned immediately with water
- If the brushes become hard, they may be cleaned with Rustins Cellulose Thinners
Health and Safety
- May produce an allergic reaction
- Keep out of reach of children
- Do not get in eyes, on skin, or on clothing
- IF SWALLOWED: Seek medical advice if you feel unwell
- IF ON SKIN: Gently wash with plenty of soap and water
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- Continue rinsing. Wear protective gloves
Data sheet
- Manufacturer
- Rustins
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water
- For Use On
- Metal, Previously Painted Surfaces
- Application Method
- Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- N/A
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
- Minimum Applied Thickness
- 100um
- Key Features
- Shielding from high-frequency electromagnetic fields and low-frequency electrical fields
- Coverage
- 5-6m² per litre per coat
- Recommended Thinner/Cleaner
- Water, Rustins Cellulose Thinners
- Min. Application Temperature
- 10°C
- Shelf Life (from date of manufacture)
- 12 Months
- Touch Dry
- 30 minutes depending upon the temperature and humidity
- UN Number
- N/A
- Dry to Recoat
- 24 hours
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Brush
- Product Usage Type
- Topcoat
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rustins G Shield Electro Smog Shielding Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT