- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tremco ES100 One Coat Universal DPM is a two part, epoxy based damp proof membrane. It has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.
- Accommodates up to 97% RH
- Solvent free
- Very cost effective single coat application reducing time on site
- Suitable with underfloor heating
- Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325)
- Utilises platelet technology to give the highest performance
- Please note: Colours shown are approximate and are for illustrative purposes only
Tremco ES100 One Coat Universal DPM is a two part, epoxy based damp proof membrane. It has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.
Benefits:
- Accommodates up to 97% RH
- Solvent free
- Very cost effective single coat application reducing time on site
- Suitable with underfloor heating
- Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325)
- Utilises platelet technology to give the highest performance
- Coverage of up to 24m² per 10kg unit and up to 60m² per 25kg unit
- For detailed product information please see the Product Data Sheet
Technical Data:
Property | Result |
---|---|
Composition | ES100 is a flexibilised epoxy, which contains wetting aids and penetrants to maximise adhesion, flow control agents to minimise pinholes and overlapping platelets which provide an extra barrier to moisture vapour |
Pot Life | 20°C: 1 hour 25 minutes |
Water Resistance | Excellent |
Chemical Resistance | Good |
Mix Ratio | 3.4:1 by weight |
Coverage per coat | Approximately 20-24 m² per 10kg unit depending on method of application and condition of substrate to give a dry film thickness of approximately 250-350 microns |
Hardening Time | 20°C: 5-6 Hours |
Service Temperature Range | -20°C to +80°C |
Storage | Store between +5°C and +30°C. Rotate stock using old material first |
Shelf Life | 6 Months when stored in its original unopened containers |
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tremco
- For Use On
- Concrete, Sand, Cement
- Application Method
- Trowel
- Colour
- Standard/Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- BS 8203, BS 5325
- Pack Size
- 10KG, 25KG
- Minimum Applied Thickness
- 250-350 microns
- Mixing Ratio
- 3.4:1 by weight
- Pot Life (at 20°C)
- 1 hour 25 minutes
- Coverage
- Approximately 20-24m² per 10kg
- Shelf Life (from date of manufacture)
- 6 months
- UN Number (Activator)
- UN3082
- UN Number (Base)
- UN2735
- Suitable For Use On
- Concrete
- Suitable For Use On
- Sand
- Suitable For Use On
- Cement
- Application Method
- Trowel
- Usages
- Dampproofing
- Usages
- Waterproofing
- Product Usage Type
- Membrane
- Colour Family
- Grey
S on 2024-01-14 21:27:45 | Question:
Hi can I apply tremco one coat on a brick wall? cheers |
Answer from Rawlins’ Technical Team:
No, this product is intended for use specifically for suppressing residual moisture in concrete and sand/cement subfloors, to provide a guaranteed surface damp proof membrane with a single coat application. Please can you provide more information to [email protected] so we can assist with a suitable alternative. | |
Will on 2022-02-28 23:27:01 | Question:
Can I put self leveling compound straight ontop of this or do I need to a primer? Thank you |
Answer from Rawlins’ Technical Team:
Yes, Tremco SX300 High Performance Latex Underlayment and Tremco SX600 High Performance Smoothing Compound can be applied without a primer providing they are applied no later than the following day. The surface temp does not exceed 18°C and there is no underfloor heating. If there is underfloor heating priming should always be undertaken, using Tremco CS190 Gritty Primer or Tremco CS100 Epoxy Primer. If the open time window is missed as per the above then priming should be undertaken. If you are using any of the following Tremco smoothing compounds Tremco SX302 Moisture Tolerant Latex Underlayment, Tremco SX500 Rapid Drying Smoothing Compound, Tremco SX100 Renovation Screed, Tremco SX220 Fast Setting Self Levelling Compound, Tremco SX250 Moisture Tolerant Smoothing Compound or Tremco SX200 Self Levelling Smoothing Compound priming should be undertaken using Tremco CS190 Gritty Primer. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tremco ES100 One Coat Universal DPM is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT