Follow us on:

Tremco ES200 Fast Curing Universal DPM | One Coat Damp Proof Membrane
Tremco ES200 Fast Curing Universal DPM | One Coat Damp Proof Membrane

Tremco ES200 Fastrak Fast Curing Universal DPM

350570 350531
TRE5480

Tremco ES200 Fastrak Fast Curing Universal DPM is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status. Developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.

  • Accommodates up to 97% RH
  • Cures in half the time of conventional epoxy based surface damp proof membranes
  • Very cost effective single coat application reducing time on site
  • Suitable with underfloor heating
  • Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325)
  • Utilises platelet technology to give the highest performance
  • Please note: Colours shown are approximate and are for illustrative purposes only
  • Please note this product is subject to a minimum order quantity

Colour
Size
£125.95(incl. VAT)
£104.96(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Tremco ES200 Fastrak Fast Curing Universal DPM is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status. Developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.

Benefits:

  • Accommodates up to 97% RH
  • Cures in half the time of conventional epoxy based surface damp proof membranes
  • Very cost effective single coat application reducing time on site
  • Suitable with underfloor heating
  • Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325)
  • Utilises platelet technology to give the highest performance
  • Coverage of up to 15m² per 6kg unit
  • For detailed product information please see the Product Data Sheet

 

Technical Data:

Property Result
Composition ES200 is a flexibilised epoxy, which contains wetting aids and penetrants to maximise adhesion, flow control agents to minimise pinholes and overlapping platelets which provide an extra barrier to moisture vapour
Pot Life Due to the fast cure profile designed into this product, all product should be applied onto the floor in a ribbon immediately after mixing. This will allow for the maximum working life to be achieved and facilitate application and improve coverage
Water Resistance Excellent
Chemical Resistance Good
Mix Ratio Mix full kits only
Coverage per coat Approximately 12.5 m² to 15 m² per 6 kg unit, practically, dependent on method of application and condition of substrate to give a dry film thickness of approximately 250 - 350 microns per coat
Hardening Time 20°C: 3 to 4 hours
Service Temperature Range -20°C to +80°C
Storage Store between +5°C and +30°C. Rotate stock using old material first
Shelf Life 6 Months when stored in its original unopened containers

 

Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Product Details
5480-887434

Data sheet

Manufacturer
Tremco
For Use On
Concrete, Sand, Cement
Application Method
Trowel, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Product Certifications
EC1, BS 8203, BS 5325
Pack Size
6KG
Minimum Applied Thickness
250 microns
Maximum Applied Thickness
350 microns
Fully Cured (at 20°C)
5-6 Hours
Coverage
Up to 15m² per 6kg unit
Shelf Life (from date of manufacture)
6 Months
UN Number (Activator)
N/A
UN Number (Base)
UN3082
Suitable For Use On
Concrete
Suitable For Use On
Cement
Suitable For Use On
Sand
Application Method
Roller
Application Method
Trowel
Usages
Waterproofing
Usages
Dampproofing
Product Usage Type
Membrane
Colour Family
Grey
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Tremco ES200 Fastrak Fast Curing Universal DPM is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT