Follow us on:

Tor Torrex Fire Upgrading Ultimate Primer | Fire Protection Systems
Tor Torrex Fire Upgrading Ultimate Primer | Fire Protection Systems

Tor Torrex Fire Upgrading Ultimate Primer

EP111

A fire retardant primer for use as the first coat of the Torrex Ultimate Systems. For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire.

  • Limitations apply
  • Allows users to upgrade the fire performance of existing coatings on walls and ceilings in communal spaces, stairwells and fire escapes in as little as 3 coats
  • Two-component - base and activator supplied in correct proportions
  • Good coverage - up to 10 square metres per litre
  • Roller application
  • Very low VOC
Colour
Size
Finish
£152.14(incl. VAT)
£126.78(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Tor Torrex Fire Upgrading Ultimate Primer, a fire retardant primer for use as the first coat of the Torrex Ultimate Systems. For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Use as the first coat of the Torrex Ultimate Systems
    • Allows users to upgrade the fire performance of existing coatings on walls and ceilings in communal spaces, stairwells and fire escapes in as little as 3 coats
  • Only for use on well adhered painted surfaces
  • Two-component - base and activator supplied in correct proportions
  • Water-based
  • Good coverage - up to 10 square metres per litre
  • Roller application
  • 45% volume solids
  • Very low VOC



Limitations


  • Will only achieved fire upgrading properties if applied as part of the Torrex Ultimate AG System or the Torrex™ Ultimate Eggshell System
  • Torrex Fire Upgrading Systems can only be applied over previously painted surfaces which show good adhesion, both between coats and to the original surface
  • Adhesion checks must be carried out before specification of the system
  • Do not apply and/or allow to dry at temperatures below 5°C
  • Do not apply if condensation is likely to occur



Surface Preparation


Only for use on well adhered painted surfaces.

Scrape off any loose or flaking paint back to a firm edge.

Remove existing graffiti with Torclean Graffiti Remover Wipe System or Torclean G Graffiti Remover.

Wash down and degrease using Torstrip WDA10 Wash Down Agent diluted 1:10 with water. Rinse with clean water.

Ensure surface is clean, dry and free of contamination prior to paint application.



IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
5550-984182

Data sheet

Manufacturer
Tor
Water / Solvent Based
Water
Application Method
Roller
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Two-Pack
Pack Size
5L
Touch Dry (at 20°C)
4 hours
Coverage
10 square metres per litre
Recommended Thinner/Cleaner
Do not thin. Clean with water, if dry on equipment use TH98
Solids by Volume
45%
Recommended Dry Film Thickness
45 microns
Recommended Wet Film Thickness
100 microns
Pot Life
2 hours
Hard Dry
16 hours (at 20C)
Base Type
Water-Based
Finish
Matt
Application Method
Roller
Usages
Fire Retardant
Product Usage Type
Primer
Product Range
Tor Fire Protection
Product Range
Torrex
Maximum Overcoating Time
7 days (at 20C)
Minimum Overcoating Time
16 hours (at 20C)
Colour Family
White
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Tor Torrex Fire Upgrading Ultimate Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage