- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A water based durable decorative fire retardant coating in 4,400+ colours.
- Must only be applied to surfaces which have been primed with Torrex Fire Upgrading Primer EM358 or Torrex Grip Primer EP120.
- For use as the finish coats of the Torrex Fire Upgrading Eggshell System.
- Limitations apply
Product customisation
Don't forget to save your customization to be able to add to cartTor Torrex Fire Upgrading Eggshell Finish, a water based durable decorative fire retardant coating for use as the finish coats of the Torrex Fire Upgrading Eggshell System.
For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
- Must only be applied to surfaces which have been primed with Torrex Fire Upgrading Primer EM358 or Torrex Grip Primer EP120
- Any areas which have been filled after priming must be re-primed prior to application of Torrex Fire Upgrading Eggshell Finish
- For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire
- Part of the Torrex Fire Upgrading Eggshell System
- Single pack
- Water-based
- Brush or roller application
- Quick drying - 1-2 hours (touch, at 20℃), 4-6 hours (hard-dry)
- 40% volume solids
- Good coverage up to 10 square metres per litre
- Low VOC
- 4,400+ colour options available in RAL, RAL Design, BS, NCS and NCS 2050 shades
- Limitations:
- Torrex Fire Upgrading Eggshell Finish must be applied at the specified spreading rate.
- Will only achieved fire upgrading properties if applied as part of the Torrex Fire Upgrading Eggshell system
- Torrex Fire Upgrading Systems can only be applied over sound well adhered multi-layered paint surfaces
- Adhesion checks must be carried out before specification of the system
- Do not apply and/or allow to dry at temperatures below 5°C
- Do not apply if condensation is likely to occur
- Drying times will be extended if temperature falls below 10°C
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Tor
- Water / Solvent Based
- Water
- Application Method
- Brush, Roller
- Sheen
- Eggshell
- Colour
- Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Coverage
- 10 square metres per litre
- Solids by Volume
- 40%
- Recommended Dry Film Thickness
- 40 microns
- Recommended Wet Film Thickness
- 100 microns
- Base Type
- Water-Based
- Finish
- Eggshell
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Fire Retardant
- Product Usage Type
- Topcoat
- Product Range
- Torrex
- Product Range
- Tor Fire Protection
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Anthracite Grey
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
Questions
Question about the product
Thomas Kwiatkowski on 2022-10-28 06:02:34 | Question:
Good Morning I am writing to you about the product Torrex Flame retadant eggshell. I would like to know if the paint meets the standards class B under BSEN 13501-. I got the decorating company and one of my clients asked me to apply this paint and confirm that it meets these criteria.Please let me know. Kind Regards Thomas Kwiatkowski |
Answer from Rawlins’ Technical Team:
This can be achieive class 0 level of fire protection when used in conjunction with one of the two primers below. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torrex Fire Upgrading Eggshell Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor Torrex Grip Primer
A fire retardant primer for use as the first coat of Torrex Fire Upgrading Systems. Only for use on well adhered painted surfaces For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire Part of Torrex AG or Torrex Eggshell Systems Limitations apply
Tor Torrex Fire Upgrading Primer
Fire retardant primer for the Torrex Fire Upgrading Systems. Used over multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire. Part of Torrex Fire Upgrading Systems A single pack pigmented urethane acrylic coating containing flame retardants Water-based Brush or roller application 45%...