- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A flame retardant intermediate coat in 1,500+ colours only to be applied over the Torrex Ultimate Primer and applied prior to application of the anti-graffiti finish coat.
- For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire
- Part of the Torrex Ultimate AG System
- Limitations apply
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Tor Torrex Fire Upgrading Ultimate Intermediate, a flame retardant intermediate coat used as part of the Torrex Ultimate AG System and applied prior to application of the anti-graffiti finish coat.
For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
- Only to be applied over the Torrex Ultimate Primer
- For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire
- Part of the Torrex Ultimate AG System
- Single pack
- Water-based
- Roller application
- Quick drying - 2 hours (touch, at 20℃), 8 hours (hard-dry)
- 50% volume solids
- Very low VOC
- 1500+ colours in RAL, RAL Design, BS, NCS and the new NCS 2050 shades
- Limitations:
- Will only achieved fire upgrading properties if applied as part of the Torrex Ultimate AG System.
- Torrex Fire Upgrading Systems can only be applied over previously painted surfaces which show good adhesion, both between coats and to the original surface
- Adhesion checks must be carried out before specification of the system
- Do not apply and/or allow to dry at temperatures below 5°C
- Do not apply if condensation is likely to occur
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5557-888058
Data sheet
- Manufacturer
- Tor
- For Use By
- Professional Use
- Water / Solvent Based
- Water
- Application Method
- Roller
- Sheen
- Matt
- Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- Min: 16 hours; Max: 7 days
- Coverage
- 5 square metres per litre
- Recommended Thinner/Cleaner
- Water
- Solids by Volume
- 50%
- Shelf Life (from date of manufacture)
- 2 years
- Recommended Dry Film Thickness
- 100 microns
- Recommended Wet Film Thickness
- 200 microns
- Hard Dry
- 8 hours
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Roller
- Components
- 1K
- Usages
- Fire Retardant
- Product Usage Type
- Intermediate Coat
- Product Range
- Torrex
- Product Range
- Tor Fire Protection
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torrex Fire Upgrading Ultimate Intermediate is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
