- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A fire retardant primer for use as the first coat of Torrex Fire Upgrading Systems.
- Only for use on well adhered painted surfaces
- For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire
- Part of Torrex AG or Torrex Eggshell Systems
- Limitations apply
Tor Torrex Grip Primer, a fire retardant primer for use as the first coat of Torrex Fire Upgrading Systems, for use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
- Only for use on well adhered painted surfaces
- For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire
- Part of Torrex AG or Torrex Eggshell Systems
- Two pack
- Water-based
- Roller application
- 45% volume solids
- Very low VOC
- Limitations:
- Will only achieved fire upgrading properties if applied as part of the Torrex AG or Torrex Eggshell Systems.
- Torrex Fire Upgrading Systems can only be applied over previously painted surfaces which show good adhesion, both between coats and to the original surface.
- Adhesion checks must be carried out before specification of the system
- Do not apply and/or allow to dry at temperatures below 5°C
- Do not apply if condensation is likely to occur
- Only applied at 8 sq.m / litre when used with Torrex AG-X topcoat – refer to specification.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Tor
- Water / Solvent Based
- Water
- Application Method
- Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Touch Dry (at 20°C)
- 4 hours
- Dry to Recoat (at 20°C)
- Min: 16 hours; Max: 7 days
- Coverage
- 8 or 10 sq.m / litre depending upon the top coat
- Recommended Thinner/Cleaner
- Water
- Solids by Volume
- 45%
- Shelf Life (from date of manufacture)
- 2 years
- Recommended Dry Film Thickness
- 45 microns (at 10 sq. m / litre), 56 microns (at 8 sq. m / litre)
- Recommended Wet Film Thickness
- 100 microns (at 10 sq. m / litre), 125 microns (at 8 sq. m / litre)
- Pot Life
- 2 hours
- Hard Dry
- 16 hours
- Base Type
- Water-Based
- Finish
- Matt
- Application Method
- Roller
- Product Usage Type
- Primer
- Product Range
- Torrex
- Product Range
- Tor Fire Protection
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torrex Grip Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor Torrex Ultimate AG Finish
Tor Torrex Ultimate AG Finish, a flame retardant anti-graffiti finish for use as the final coat of the Torrex Ultimate AG System. Provides an outstanding non-sacrificial anti graffiti finish that is extremely durable and easily cleaned. To be applied over Torrex Ultimate Intermediate Ensure the Torrex Ultimate Intermediate is dry before...
Tor Torrex Fire Upgrading Eggshell Finish
A water based durable decorative fire retardant coating in 4,400+ colours. Must only be applied to surfaces which have been primed with Torrex Fire Upgrading Primer EM358 or Torrex Grip Primer EP120. For use as the finish coats of the Torrex Fire Upgrading Eggshell System. Limitations apply Order a Colour Sample
Tor Torrex Fire Upgrading AG-X Finish
A decorative water based fire retardant coating in 1,500+ colours for use as the finish coats of the Torrex Fire Upgrading AG-X System. Provides an outstanding non-sacrificial anti-graffiti finish that is extremely durable and easily cleaned. Must only be applied to surfaces which have been primed with Torrex Grip Primer EP120 Limitations...
Tor Torrex Flame Retardant Eggshell
Durable flame retardant finish in 4,400+ water based eggshell colours. For use over low risk existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire. Two coats of Torrex Flame Retardant Eggshell will convert 12 coats of conventional water based coatings to Class 0 when tested to BS476...