Follow us on:

Tor Torrex Fire Upgrading AG-X Finish | Anti-Graffiti & Fire Protection
Tor Torrex Fire Upgrading AG-X Finish | Anti-Graffiti & Fire Protection

Tor Torrex Fire Upgrading AG-X Finish

PU823
TOR5559

A decorative water based fire retardant coating in 1,500+ colours for use as the finish coats of the Torrex Fire Upgrading AG-X System. Provides an outstanding non-sacrificial anti-graffiti finish that is extremely durable and easily cleaned.

  • Must only be applied to surfaces which have been primed with Torrex Grip Primer EP120
  • Limitations apply

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£282.73(incl. VAT)
£235.61(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Tor Torrex Fire Upgrading AG-X Finish, a decorative water based fire retardant coating for use as the finish coats of the Torrex Fire Upgrading AG-X System. Provides an outstanding non-sacrificial anti-graffiti finish that is extremely durable and easily cleaned.

For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.

Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.



Features & Benefits


  • Must only be applied to surfaces which have been primed with Torrex Grip Primer EP120
  • For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire
  • Part of the Torrex Fire Upgrading AG-X System
  • Two pack pigmented, polyurethane containing flame retardants
  • Water-based
  • Roller application
  • 45% volume solids
  • Very low VOC
  • Quick drying - touch dry in just 2 hours, hard dry in 6 hours (at 20°C)
  • 1500+ colours in RAL, RAL Design, BS, NCS and the new NCS 2050 shades
  • Limitations:
    • Will only achieved fire upgrading properties if applied as part of the Torrex Fire Upgrading AG-X system
    • Torrex Fire Upgrading AG-X Finish must be applied at the specified spreading rate
    • Torrex Fire Upgrading Systems can only be applied over sound well adhered multi- layered paint surfaces. Adhesion checks must be carried out before specification of the system.
    • Do not attempt to remove graffiti until Torrex Fire Upgrading AG-X Finish has cured for at least 7 days (at 20℃).
    • Do not apply and/or allow to dry at temperatures below 5℃
    • Do not apply if condensation is likely to occur
    • Drying times will be extended if temperature falls below 10℃.



IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
5559-888066

Data sheet

Manufacturer
Tor
For Use By
Professional Use
Interior / Exterior Use
Interior Use
Water / Solvent Based
Water
Application Method
Roller
Sheen
Semi Gloss
Colour
Fully Tintable
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Two-Pack
Pack Size
5L
Interior/Exterior Use
Interior Use
Mixing Ratio
Base and activator supplied in correct proportions.
Touch Dry (at 20°C)
2 hours
Dry to Recoat (at 20°C)
Min: 16 hours; Max: 3 days
Coverage
10 square metres per litre
Recommended Thinner/Cleaner
Water. If dry on equipment use Tor TH98
Solids by Volume
45%
Shelf Life (from date of manufacture)
12 months
Layer Thickness
45 microns dft from 100 microns wft
Pot Life
4 hours at 20C
Hard Dry
6 hours
Base Type
Water-Based
Suitable For Use On
Fire Protection System
Finish
Semi-Gloss
Application Method
Roller
Components
2K
Permanent / Semi-Permanent
Permanent
Usages
Fire Retardant
Product Usage Type
Topcoat
Product Range
Torrex
Product Range
Tor Fire Protection
Colour Family
Purple
Colour Family
Yellow
Colour Family
Off-White
Colour Family
Black
Colour Family
White
Colour Family
Neutral
Colour Family
Anthracite Grey
Colour Family
Violet
Colour Family
Cream
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Tor Torrex Fire Upgrading AG-X Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage