- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A durable water based anti-graffiti flame retardant finish in 1,600+ gloss colours. For use over low risk existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
- Two coats of Torrex Flame Retardant Anti-Graffiti will convert 12 coats of conventional water based coatings to Class 0 when tested to BS476 Parts 6 and 7
- Must only be applied to surfaces which have good adhesion and have been previously coated with conventional water based coatings
- Limitations apply
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Tor Torrex Flame Retardant Anti-Graffiti, a durable water based anti-graffiti flame retardant finish. For use over low risk existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
Two coats of Torrex Flame Retardant Anti-Graffiti will convert 12 coats of conventional water based coatings to Class 0 when tested to BS476 Parts 6 and 7.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits 
- Two coats of Torrex Flame Retardant Anti-Graffiti will convert 12 coats of conventional water based coatings to Class 0 when tested to BS476 Parts 6 and 7
- Must only be applied to surfaces which have good adhesion and have been previously coated with conventional water based coatings
- Two-pack pigmented polyurethane coating containing flame retardants
- Water-based
- Brush or roller application
- 40% volume solids
- Very low VOC
- Good coverage of up to 12 square metres per litre
- 1,600+ colours in RAL, RAL Design, BS, NCS and the new NCS 2050 shades
- Limitations:
- Weakly bound matt painted surfaces should be consolidated by applying one coat of Tor Surface Sealer EM337 before applying Tor Flame retardant anti-graffiti
- Torrex Flame Retardant anti-graffiti must be applied at the specified spreading rate
- Torrex Flame Retardant anti-graffiti can only be applied over sound well adhered multi-layered paint surfaces. Adhesion checks must be carried out before specification of the system
- If a primer is required (eg. for spot priming) use Aqualife Multi-surface primer EM367
- Do not apply and/or allow to dry at temperatures below 5℃
- Do not apply if condensation is likely to occur
- Drying times will be extended if temperature falls below 10℃
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions . We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5573-888089
Data sheet
- Manufacturer
- Tor
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Fire Protection System
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Interior/Exterior Use
- Interior Use
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- Min: 8 hours; Max: 7 days
- Coverage
- 12 square metres per litre
- Recommended Thinner/Cleaner
- Water
- Solids by Volume
- 40%
- Shelf Life (from date of manufacture)
- 3 years
- Layer Thickness
- 35 microns dft from 83 microns wft
- Hard Dry
- 8 hours
- Base Type
- Water-Based
- Suitable For Use On
- Fire Protection System
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Usages
- Fire Retardant
- Product Usage Type
- Topcoat
- Product Range
- Torrex
- Product Range
- Tor Fire Protection
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Categorised As
- Fire Protection for Plasterboard
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torrex Flame Retardant Anti-Graffiti is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
