- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products.
- Walk on after 2 hours, floor coverings can be installed after 4 hours
- Suitable for use over most adhesive residues
- Moisture tolerant – can be used under a DPM
- Suitable for use over underfloor heating systems
- No need to prime if being applied to a Tremco DPM
- No ammonia
- Please note this product is subject to a minimum order quantity
Tremco SX600 High Performance Smoothing Compound is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. Additionally, there is no need to prime if being applied to a Tremco DPM. The product has a walk on time of 2 hours and can receive floor coverings after 4 hours.
SX600 has been designed for levelling uneven subfloors and is well suited to areas that require low odour products. It can be used under a DPM or over underfloor heating systems.
Benefits:
- Suitable for use over most adhesive residues
- Moisture tolerant – can be used under a DPM
- Suitable for use over underfloor heating systems
- No need to prime if being applied to a Tremco DPM
- No ammonia
- Coverage of up to 5m² per mix at a thickness of 3mm
- For detailed product information please see the Product Data Sheet
Technical Data:
Property | Result |
---|---|
Composition | Cementitious powder and liquid latex dispersion |
Pot Life | 20°C: 20 minutes |
Compressive Strength | After 28 days approx. >18 N/mm² |
Coverage |
Coverage of up to 5m² per mix at a thickness of 3mm. Thicknesses of 1mm to 12mm can be applied depending on surface profile, however for thicknesses above 8mm it is recommended that the product be bulked out with hard aggregate. The above will depend on the condition of the substrate and method of preparation* |
Cure Time | 20°C: Approximately 2 hours for foot traffic and from 4 hours for the application of a damp proof membrane, floor coverings and loading. Do not apply at temperatures lower than 5°C |
Storage | Store in dry shaded conditions between +10°C and +35°C |
Shelf Life | 12 Months when stored in its original unopened packaging |
*Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Data sheet
- Manufacturer
- Tremco
- Interior / Exterior Use
- Interior Use
- For Use On
- Metal, Ceramic Tiles, Wood, Concrete, Cement, Sand Screed
- Application Method
- Trowel, Spiked Roller
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 25KG (20kg Bag, 5kg Bottle)
- Minimum Applied Thickness
- 1mm
- Maximum Applied Thickness
- 12mm
- Pot Life (at 20°C)
- 20 minutes
- Coverage
- Coverage of up to 5m² per mix at a thickness of 3mm
- Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- UN Number (Activator)
- N/A
- UN Number (Base)
- N/A
- Layer Thickness
- 1-8mm
- Dry for Light Traffic (at 20°C)
- 2 hours
- Drying time
- Walk on hardness time at 20°C 2 hours
- Base Type
- Cement Based
- Suitable For Use On
- Most Old Adhesive Residues
- Suitable For Use On
- Metal
- Suitable For Use On
- Wood
- Suitable For Use On
- Ceramic Tiles
- Suitable For Use On
- Anhydrite Screeds
- Suitable For Use On
- Concrete
- Suitable For Use On
- Cement
- Suitable For Use On
- Sand Screed
- Application Method
- Trowel
- Application Method
- Roller
- Usages
- Moisture Tolerant
- Usages
- Suitable for underfloor heating
- Usages
- Low Odour
- Usages
- Smoothing
- Product Usage Type
- Compound
- Product Attributes
- Suitable For Underfloor Heating
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tremco SX600 High Performance Smoothing Compound is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tremco ES100 One Coat Universal DPM
Tremco ES100 One Coat Universal DPM is a two part, epoxy based damp proof membrane. It has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application. Accommodates up to 97% RH Solvent free Very cost...
Tremco ES200 Fastrak Fast Curing Universal DPM
Tremco ES200 Fastrak Fast Curing Universal DPM is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status. Developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application....
Tremco ES300 Surface DPM
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Waterproofing and Dampproofing page for more repair materials.