Tremco CS100 Epoxy Primer is a two part water based epoxy primer and bonding agent. CS100 Epoxy Primer is designed to prime Tremco surface damp proof membranes and other non-porous surfaces before the application of Tremco smoothing compounds.

CS100 is Specifically formulated for interior use on particularly smooth or dense surfaces such as:

• Power floated concrete
• Precast concrete
• Terrazzo
• Glazed ceramic tiles
• Quarry tiles
• Hard flooring grade asphalt
• Rigid metal
• Sound paint thickness coatings

Benefits:

• Coverage of approximately 15 to 20m² per kg depending on the substrate and method of application
• Non-flammable
• Non-corrosive
• Solvent free
• Easy to apply
• Improves substrate chemical resistance
• Excellent adhesion to a wide range of substrates
• For detailed product information please see the Product Data Sheet

 Preparation:

• Surfaces should be clean, firm and free from dust, dirt or other material liable to impair adhesion

Mixing:

CS100 Epoxy Primer hardens by a chemical reaction. It is essential that the mixing instructions are strictly adhered to:

• Stir Part 1 and Part 2 thoroughly before transferring Part 2 into the Part 1 container
• Using a slow speed drill fitted with a Tremco two bladed propeller (not a cement paddle), mix the contents for 4 - 5 minutes to obtain uniformity in colour and consistency
• Ensure all materials from the base and sides of the containers are mixed in thoroughly to ensure a uniform cure
• Do not mix more 5 kg units than can be used within the working pot life
• Mixed primer has a working time of approximately 1 hour after which any unused primer MUST be discarded

Application:

• Apply a thin coat to the substrate using a foam or short pile roller, paint brush or squeegee taking care to prevent the formation of puddles
• On smooth impervious substrates, application by squeegee is the most effective way to quickly obtain a very thin film
• Leave the coating to dry to a translucent, tacky film (usually 3 to 6 hours with a paint roller or brush applications and 1 to 3 hours with a squeegee application - depending on substrate, temperature and ventilation). If in doubt, leave overnight
• Once dried, the primed surface is ready for overlaying (e.g. to receive Tremco smoothing compounds) and must be kept free of contaminants
• If more than 24 hours have elapsed since the application, then a repeat application of the primer may be required

Technical Data:

Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.